[PATCH 06/17] [POWERPC] Rename get_property to of_get_property: arch/powerpc/platforms/powermac
Stephen Rothwell
sfr at canb.auug.org.au
Tue Apr 3 22:32:57 EST 2007
Signed-off-by: Stephen Rothwell <sfr at canb.auug.org.au>
---
arch/powerpc/platforms/powermac/backlight.c | 2 +-
arch/powerpc/platforms/powermac/cpufreq_32.c | 21 +++++++++++----------
arch/powerpc/platforms/powermac/cpufreq_64.c | 16 ++++++++--------
arch/powerpc/platforms/powermac/feature.c | 24 ++++++++++++------------
arch/powerpc/platforms/powermac/low_i2c.c | 15 ++++++++-------
arch/powerpc/platforms/powermac/pci.c | 16 ++++++++--------
arch/powerpc/platforms/powermac/pfunc_base.c | 2 +-
arch/powerpc/platforms/powermac/pfunc_core.c | 2 +-
arch/powerpc/platforms/powermac/pic.c | 6 +++---
arch/powerpc/platforms/powermac/setup.c | 20 +++++++++++---------
arch/powerpc/platforms/powermac/smp.c | 6 +++---
arch/powerpc/platforms/powermac/udbg_scc.c | 6 +++---
12 files changed, 70 insertions(+), 66 deletions(-)
--
Cheers,
Stephen Rothwell sfr at canb.auug.org.au
diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c
index de7440e..0dc8a45 100644
--- a/arch/powerpc/platforms/powermac/backlight.c
+++ b/arch/powerpc/platforms/powermac/backlight.c
@@ -59,7 +59,7 @@ int pmac_has_backlight_type(const char *type)
struct device_node* bk_node = find_devices("backlight");
if (bk_node) {
- const char *prop = get_property(bk_node,
+ const char *prop = of_get_property(bk_node,
"backlight-control", NULL);
if (prop && strncmp(prop, type, strlen(type)) == 0)
return 1;
diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index c2b6b41..76eda9f 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -421,7 +421,7 @@ static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
static u32 read_gpio(struct device_node *np)
{
- const u32 *reg = get_property(np, "reg", NULL);
+ const u32 *reg = of_get_property(np, "reg", NULL);
u32 offset;
if (reg == NULL)
@@ -521,13 +521,14 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
int lenp, rc;
const u32 *freqs, *ratio;
- freqs = get_property(cpunode, "bus-frequencies", &lenp);
+ freqs = of_get_property(cpunode, "bus-frequencies", &lenp);
lenp /= sizeof(u32);
if (freqs == NULL || lenp != 2) {
printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
return 1;
}
- ratio = get_property(cpunode, "processor-to-bus-ratio*2", NULL);
+ ratio = of_get_property(cpunode, "processor-to-bus-ratio*2",
+ NULL);
if (ratio == NULL) {
printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
return 1;
@@ -562,7 +563,7 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
/* If we use the PMU, look for the min & max frequencies in the
* device-tree
*/
- value = get_property(cpunode, "min-clock-frequency", NULL);
+ value = of_get_property(cpunode, "min-clock-frequency", NULL);
if (!value)
return 1;
low_freq = (*value) / 1000;
@@ -571,7 +572,7 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
if (low_freq < 100000)
low_freq *= 10;
- value = get_property(cpunode, "max-clock-frequency", NULL);
+ value = of_get_property(cpunode, "max-clock-frequency", NULL);
if (!value)
return 1;
hi_freq = (*value) / 1000;
@@ -585,7 +586,7 @@ static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
{
struct device_node *volt_gpio_np;
- if (get_property(cpunode, "dynamic-power-step", NULL) == NULL)
+ if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
return 1;
volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
@@ -614,11 +615,11 @@ static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
u32 pvr;
const u32 *value;
- if (get_property(cpunode, "dynamic-power-step", NULL) == NULL)
+ if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
return 1;
hi_freq = cur_freq;
- value = get_property(cpunode, "reduced-clock-frequency", NULL);
+ value = of_get_property(cpunode, "reduced-clock-frequency", NULL);
if (!value)
return 1;
low_freq = (*value) / 1000;
@@ -662,14 +663,14 @@ static int __init pmac_cpufreq_setup(void)
goto out;
/* Get current cpu clock freq */
- value = get_property(cpunode, "clock-frequency", NULL);
+ value = of_get_property(cpunode, "clock-frequency", NULL);
if (!value)
goto out;
cur_freq = (*value) / 1000;
/* Check for 7447A based MacRISC3 */
if (machine_is_compatible("MacRISC3") &&
- get_property(cpunode, "dynamic-power-step", NULL) &&
+ of_get_property(cpunode, "dynamic-power-step", NULL) &&
PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
pmac_cpufreq_init_7447A(cpunode);
/* Check for other MacRISC3 machines */
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 9d22361..567d552 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -410,7 +410,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
/* Get first CPU node */
for (cpunode = NULL;
(cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
- const u32 *reg = get_property(cpunode, "reg", NULL);
+ const u32 *reg = of_get_property(cpunode, "reg", NULL);
if (reg == NULL || (*reg) != 0)
continue;
if (!strcmp(cpunode->type, "cpu"))
@@ -422,7 +422,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
}
/* Check 970FX for now */
- valp = get_property(cpunode, "cpu-version", NULL);
+ valp = of_get_property(cpunode, "cpu-version", NULL);
if (!valp) {
DBG("No cpu-version property !\n");
goto bail_noprops;
@@ -434,7 +434,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
}
/* Look for the powertune data in the device-tree */
- g5_pmode_data = get_property(cpunode, "power-mode-data",&psize);
+ g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize);
if (!g5_pmode_data) {
DBG("No power-mode-data !\n");
goto bail_noprops;
@@ -493,7 +493,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
* half freq in this version. So far, I haven't yet seen a machine
* supporting anything else.
*/
- valp = get_property(cpunode, "clock-frequency", NULL);
+ valp = of_get_property(cpunode, "clock-frequency", NULL);
if (!valp)
return -ENODEV;
max_freq = (*valp)/1000;
@@ -563,7 +563,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
/* Lookup the cpuid eeprom node */
cpuid = of_find_node_by_path("/u3 at 0,f8000000/i2c at f8001000/cpuid at a0");
if (cpuid != NULL)
- eeprom = get_property(cpuid, "cpuid", NULL);
+ eeprom = of_get_property(cpuid, "cpuid", NULL);
if (eeprom == NULL) {
printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n");
rc = -ENODEV;
@@ -573,13 +573,13 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
/* Lookup the i2c hwclock */
for (hwclock = NULL;
(hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){
- const char *loc = get_property(hwclock,
+ const char *loc = of_get_property(hwclock,
"hwctrl-location", NULL);
if (loc == NULL)
continue;
if (strcmp(loc, "CPU CLOCK"))
continue;
- if (!get_property(hwclock, "platform-get-frequency", NULL))
+ if (!of_get_property(hwclock, "platform-get-frequency", NULL))
continue;
break;
}
@@ -638,7 +638,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
*/
/* Get max frequency from device-tree */
- valp = get_property(cpunode, "clock-frequency", NULL);
+ valp = of_get_property(cpunode, "clock-frequency", NULL);
if (!valp) {
printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n");
rc = -ENODEV;
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 24cc50c..103fcc4 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -1057,8 +1057,8 @@ core99_reset_cpu(struct device_node *node, long param, long value)
if (np == NULL)
return -ENODEV;
for (np = np->child; np != NULL; np = np->sibling) {
- const u32 *num = get_property(np, "reg", NULL);
- const u32 *rst = get_property(np, "soft-reset", NULL);
+ const u32 *num = of_get_property(np, "reg", NULL);
+ const u32 *rst = of_get_property(np, "soft-reset", NULL);
if (num == NULL || rst == NULL)
continue;
if (param == *num) {
@@ -1095,7 +1095,7 @@ core99_usb_enable(struct device_node *node, long param, long value)
macio->type != macio_intrepid)
return -ENODEV;
- prop = get_property(node, "AAPL,clock-id", NULL);
+ prop = of_get_property(node, "AAPL,clock-id", NULL);
if (!prop)
return -ENODEV;
if (strncmp(prop, "usb0u048", 8) == 0)
@@ -1506,8 +1506,8 @@ static long g5_reset_cpu(struct device_node *node, long param, long value)
if (np == NULL)
return -ENODEV;
for (np = np->child; np != NULL; np = np->sibling) {
- const u32 *num = get_property(np, "reg", NULL);
- const u32 *rst = get_property(np, "soft-reset", NULL);
+ const u32 *num = of_get_property(np, "reg", NULL);
+ const u32 *rst = of_get_property(np, "soft-reset", NULL);
if (num == NULL || rst == NULL)
continue;
if (param == *num) {
@@ -2411,7 +2411,7 @@ static int __init probe_motherboard(void)
*/
dt = find_devices("device-tree");
if (dt != NULL)
- model = get_property(dt, "model", NULL);
+ model = of_get_property(dt, "model", NULL);
for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
pmac_mb = pmac_mb_defs[i];
@@ -2509,7 +2509,7 @@ found:
if (np->sibling)
break;
/* Nap mode not supported if flush-on-lock property is present */
- if (get_property(np, "flush-on-lock", NULL))
+ if (of_get_property(np, "flush-on-lock", NULL))
break;
powersave_nap = 1;
printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n");
@@ -2558,7 +2558,7 @@ static void __init probe_uninorth(void)
if (uninorth_node == NULL)
return;
- addrp = get_property(uninorth_node, "reg", NULL);
+ addrp = of_get_property(uninorth_node, "reg", NULL);
if (addrp == NULL)
return;
address = of_translate_address(uninorth_node, addrp);
@@ -2642,7 +2642,7 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
return;
}
if (type == macio_keylargo || type == macio_keylargo2) {
- const u32 *did = get_property(node, "device-id", NULL);
+ const u32 *did = of_get_property(node, "device-id", NULL);
if (*did == 0x00000025)
type = macio_pangea;
if (*did == 0x0000003e)
@@ -2655,7 +2655,7 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
macio_chips[i].base = base;
macio_chips[i].flags = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON;
macio_chips[i].name = macio_names[type];
- revp = get_property(node, "revision-id", NULL);
+ revp = of_get_property(node, "revision-id", NULL);
if (revp)
macio_chips[i].rev = *revp;
printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
@@ -2706,8 +2706,8 @@ initial_serial_shutdown(struct device_node *np)
int port_type = PMAC_SCC_ASYNC;
int modem = 0;
- slots = get_property(np, "slot-names", &len);
- conn = get_property(np, "AAPL,connector", &len);
+ slots = of_get_property(np, "slot-names", &len);
+ conn = of_get_property(np, "AAPL,connector", &len);
if (conn && (strcmp(conn, "infrared") == 0))
port_type = PMAC_SCC_IRDA;
else if (device_is_compatible(np, "cobalt"))
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index bfc4829..5430e14 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -491,7 +491,7 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
* on all i2c keywest nodes so far ... we would have to fallback
* to macio parsing if that wasn't the case
*/
- addrp = get_property(np, "AAPL,address", NULL);
+ addrp = of_get_property(np, "AAPL,address", NULL);
if (addrp == NULL) {
printk(KERN_ERR "low_i2c: Can't find address for %s\n",
np->full_name);
@@ -505,13 +505,13 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
host->timeout_timer.function = kw_i2c_timeout;
host->timeout_timer.data = (unsigned long)host;
- psteps = get_property(np, "AAPL,address-step", NULL);
+ psteps = of_get_property(np, "AAPL,address-step", NULL);
steps = psteps ? (*psteps) : 0x10;
for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++)
steps >>= 1;
/* Select interface rate */
host->speed = KW_I2C_MODE_25KHZ;
- prate = get_property(np, "AAPL,i2c-rate", NULL);
+ prate = of_get_property(np, "AAPL,i2c-rate", NULL);
if (prate) switch(*prate) {
case 100:
host->speed = KW_I2C_MODE_100KHZ;
@@ -619,7 +619,7 @@ static void __init kw_i2c_probe(void)
} else {
for (child = NULL;
(child = of_get_next_child(np, child)) != NULL;) {
- const u32 *reg = get_property(child,
+ const u32 *reg = of_get_property(child,
"reg", NULL);
if (reg == NULL)
continue;
@@ -905,7 +905,7 @@ static void __init smu_i2c_probe(void)
if (strcmp(busnode->type, "i2c") &&
strcmp(busnode->type, "i2c-bus"))
continue;
- reg = get_property(busnode, "reg", NULL);
+ reg = of_get_property(busnode, "reg", NULL);
if (reg == NULL)
continue;
@@ -950,7 +950,8 @@ struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node)
if (p == bus->busnode) {
if (prev && bus->flags & pmac_i2c_multibus) {
const u32 *reg;
- reg = get_property(prev, "reg", NULL);
+ reg = of_get_property(prev, "reg",
+ NULL);
if (!reg)
continue;
if (((*reg) >> 8) != bus->channel)
@@ -971,7 +972,7 @@ EXPORT_SYMBOL_GPL(pmac_i2c_find_bus);
u8 pmac_i2c_get_dev_addr(struct device_node *device)
{
- const u32 *reg = get_property(device, "reg", NULL);
+ const u32 *reg = of_get_property(device, "reg", NULL);
if (reg == NULL)
return 0;
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 431a685..092cef4 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -70,11 +70,11 @@ static int __init fixup_one_level_bus_range(struct device_node *node, int higher
int len;
/* For PCI<->PCI bridges or CardBus bridges, we go down */
- class_code = get_property(node, "class-code", NULL);
+ class_code = of_get_property(node, "class-code", NULL);
if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
continue;
- bus_range = get_property(node, "bus-range", &len);
+ bus_range = of_get_property(node, "bus-range", &len);
if (bus_range != NULL && len > 2 * sizeof(int)) {
if (bus_range[1] > higher)
higher = bus_range[1];
@@ -246,8 +246,8 @@ static int chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
if (np == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
- vendor = get_property(np, "vendor-id", NULL);
- device = get_property(np, "device-id", NULL);
+ vendor = of_get_property(np, "vendor-id", NULL);
+ device = of_get_property(np, "device-id", NULL);
if (vendor == NULL || device == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -691,17 +691,17 @@ static void __init fixup_nec_usb2(void)
const u32 *prop;
u8 bus, devfn;
- prop = get_property(nec, "vendor-id", NULL);
+ prop = of_get_property(nec, "vendor-id", NULL);
if (prop == NULL)
continue;
if (0x1033 != *prop)
continue;
- prop = get_property(nec, "device-id", NULL);
+ prop = of_get_property(nec, "device-id", NULL);
if (prop == NULL)
continue;
if (0x0035 != *prop)
continue;
- prop = get_property(nec, "reg", NULL);
+ prop = of_get_property(nec, "reg", NULL);
if (prop == NULL)
continue;
devfn = (prop[0] >> 8) & 0xff;
@@ -909,7 +909,7 @@ static int __init add_bridge(struct device_node *dev)
has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
/* Get bus range if any */
- bus_range = get_property(dev, "bus-range", &len);
+ bus_range = of_get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %s, assume"
" bus 0\n", dev->full_name);
diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c
index 5c6c15c..45d54b9 100644
--- a/arch/powerpc/platforms/powermac/pfunc_base.c
+++ b/arch/powerpc/platforms/powermac/pfunc_base.c
@@ -114,7 +114,7 @@ static void macio_gpio_init_one(struct macio_chip *macio)
* we just create them all
*/
for (gp = NULL; (gp = of_get_next_child(gparent, gp)) != NULL;) {
- const u32 *reg = get_property(gp, "reg", NULL);
+ const u32 *reg = of_get_property(gp, "reg", NULL);
unsigned long offset;
if (reg == NULL)
continue;
diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c
index a128553..8543423 100644
--- a/arch/powerpc/platforms/powermac/pfunc_core.c
+++ b/arch/powerpc/platforms/powermac/pfunc_core.c
@@ -820,7 +820,7 @@ struct pmf_function *__pmf_find_function(struct device_node *target,
* one, then we fallback to a direct call attempt
*/
snprintf(fname, 63, "platform-%s", name);
- prop = get_property(target, fname, NULL);
+ prop = of_get_property(target, fname, NULL);
if (prop == NULL)
goto find_it;
ph = *prop;
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 5e5c0e4..f59d311 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -482,7 +482,7 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0);
flags |= MPIC_WANTS_RESET;
- if (get_property(np, "big-endian", NULL))
+ if (of_get_property(np, "big-endian", NULL))
flags |= MPIC_BIG_ENDIAN;
/* Primary Big Endian means HT interrupts. This is quite dodgy
@@ -510,7 +510,7 @@ static int __init pmac_pic_probe_mpic(void)
for (np = NULL; (np = of_find_node_by_type(np, "open-pic"))
!= NULL;) {
if (master == NULL &&
- get_property(np, "interrupts", NULL) == NULL)
+ of_get_property(np, "interrupts", NULL) == NULL)
master = of_node_get(np);
else if (slave == NULL)
slave = of_node_get(np);
@@ -575,7 +575,7 @@ void __init pmac_pic_init(void)
#ifdef CONFIG_PPC32
if (!pmac_newworld)
flags |= OF_IMAP_OLDWORLD_MAC;
- if (get_property(of_chosen, "linux,bootx", NULL) != NULL)
+ if (of_get_property(of_chosen, "linux,bootx", NULL) != NULL)
flags |= OF_IMAP_NO_PHANDLE;
#endif /* CONFIG_PPC_32 */
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 651fa42..4de273d 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -135,12 +135,12 @@ static void pmac_show_cpuinfo(struct seq_file *m)
seq_printf(m, "machine\t\t: ");
np = of_find_node_by_path("/");
if (np != NULL) {
- pp = get_property(np, "model", NULL);
+ pp = of_get_property(np, "model", NULL);
if (pp != NULL)
seq_printf(m, "%s\n", pp);
else
seq_printf(m, "PowerMac\n");
- pp = get_property(np, "compatible", &plen);
+ pp = of_get_property(np, "compatible", &plen);
if (pp != NULL) {
seq_printf(m, "motherboard\t:");
while (plen > 0) {
@@ -164,11 +164,13 @@ static void pmac_show_cpuinfo(struct seq_file *m)
if (np == NULL)
np = of_find_node_by_type(NULL, "cache");
if (np != NULL) {
- const unsigned int *ic = get_property(np, "i-cache-size", NULL);
- const unsigned int *dc = get_property(np, "d-cache-size", NULL);
+ const unsigned int *ic =
+ of_get_property(np, "i-cache-size", NULL);
+ const unsigned int *dc =
+ of_get_property(np, "d-cache-size", NULL);
seq_printf(m, "L2 cache\t:");
has_l2cache = 1;
- if (get_property(np, "cache-unified", NULL) != 0 && dc) {
+ if (of_get_property(np, "cache-unified", NULL) != 0 && dc) {
seq_printf(m, " %dK unified", *dc / 1024);
} else {
if (ic)
@@ -177,7 +179,7 @@ static void pmac_show_cpuinfo(struct seq_file *m)
seq_printf(m, "%s %dK data",
(ic? " +": ""), *dc / 1024);
}
- pp = get_property(np, "ram-type", NULL);
+ pp = of_get_property(np, "ram-type", NULL);
if (pp)
seq_printf(m, " %s", pp);
seq_printf(m, "\n");
@@ -254,7 +256,7 @@ static void __init l2cr_init(void)
np = find_type_devices("cpu");
if (np != 0) {
const unsigned int *l2cr =
- get_property(np, "l2cr-value", NULL);
+ of_get_property(np, "l2cr-value", NULL);
if (l2cr != 0) {
ppc_override_l2cr = 1;
ppc_override_l2cr_value = *l2cr;
@@ -286,7 +288,7 @@ static void __init pmac_setup_arch(void)
loops_per_jiffy = 50000000 / HZ;
cpu = of_find_node_by_type(NULL, "cpu");
if (cpu != NULL) {
- fp = get_property(cpu, "clock-frequency", NULL);
+ fp = of_get_property(cpu, "clock-frequency", NULL);
if (fp != NULL) {
if (pvr >= 0x30 && pvr < 0x80)
/* PPC970 etc. */
@@ -303,7 +305,7 @@ static void __init pmac_setup_arch(void)
/* See if newworld or oldworld */
for (ic = NULL; (ic = of_find_all_nodes(ic)) != NULL; )
- if (get_property(ic, "interrupt-controller", NULL))
+ if (of_get_property(ic, "interrupt-controller", NULL))
break;
if (ic) {
pmac_newworld = 1;
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index d73fb73..20f3286 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -567,7 +567,7 @@ static void __init smp_core99_setup_i2c_hwsync(int ncpus)
pmac_tb_clock_chip_host = pmac_i2c_find_bus(cc);
if (pmac_tb_clock_chip_host == NULL)
continue;
- reg = get_property(cc, "reg", NULL);
+ reg = of_get_property(cc, "reg", NULL);
if (reg == NULL)
continue;
switch (*reg) {
@@ -695,7 +695,7 @@ static void __init smp_core99_setup(int ncpus)
struct device_node *cpus =
of_find_node_by_path("/cpus");
if (cpus &&
- get_property(cpus, "platform-cpu-timebase", NULL)) {
+ of_get_property(cpus, "platform-cpu-timebase", NULL)) {
pmac_tb_freeze = smp_core99_pfunc_tb_freeze;
printk(KERN_INFO "Processor timebase sync using"
" platform function\n");
@@ -712,7 +712,7 @@ static void __init smp_core99_setup(int ncpus)
core99_tb_gpio = KL_GPIO_TB_ENABLE; /* default value */
cpu = of_find_node_by_type(NULL, "cpu");
if (cpu != NULL) {
- tbprop = get_property(cpu, "timebase-enable", NULL);
+ tbprop = of_get_property(cpu, "timebase-enable", NULL);
if (tbprop)
core99_tb_gpio = *tbprop;
of_node_put(cpu);
diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index 379db05..47de4d3 100644
--- a/arch/powerpc/platforms/powermac/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -81,7 +81,7 @@ void udbg_scc_init(int force_scc)
macio = of_get_parent(escc);
if (macio == NULL)
goto bail;
- path = get_property(of_chosen, "linux,stdout-path", NULL);
+ path = of_get_property(of_chosen, "linux,stdout-path", NULL);
if (path != NULL)
stdout = of_find_node_by_path(path);
for (ch = NULL; (ch = of_get_next_child(escc, ch)) != NULL;) {
@@ -96,13 +96,13 @@ void udbg_scc_init(int force_scc)
ch = ch_def ? ch_def : ch_a;
/* Get address within mac-io ASIC */
- reg = get_property(escc, "reg", NULL);
+ reg = of_get_property(escc, "reg", NULL);
if (reg == NULL)
goto bail;
addr = reg[0];
/* Get address of mac-io PCI itself */
- reg = get_property(macio, "assigned-addresses", NULL);
+ reg = of_get_property(macio, "assigned-addresses", NULL);
if (reg == NULL)
goto bail;
addr += reg[2];
--
1.5.0.3
More information about the Linuxppc-dev
mailing list