[PATCH]: PCI Error Recovery: Symbios SCSI device driver
Luca
kronos.it at gmail.com
Sat Sep 23 08:06:29 EST 2006
Hi Linas,
Linas Vepstas <linas at austin.ibm.com> ha scritto:
> Index: linux-2.6.18-rc7-git1/drivers/scsi/sym53c8xx_2/sym_glue.c
> ===================================================================
> --- linux-2.6.18-rc7-git1.orig/drivers/scsi/sym53c8xx_2/sym_glue.c 2006-09-21 17:32:54.000000000 -0500
> +++ linux-2.6.18-rc7-git1/drivers/scsi/sym53c8xx_2/sym_glue.c 2006-09-21 17:35:37.000000000 -0500
> +/**
> + * sym2_io_slot_reset() -- called when the pci bus has been reset.
> + * @pdev: pointer to PCI device
> + *
> + * Restart the card from scratch.
> + */
> +static pci_ers_result_t sym2_io_slot_reset (struct pci_dev *pdev)
> +{
> + struct sym_hcb *np = pci_get_drvdata(pdev);
> +
> + printk (KERN_INFO "%s: recovering from a PCI slot reset\n",
Space after function name? You put in other places too, it's not
consistent with the rest of the patch.
> + sym_name(np));
> +
> + if (pci_enable_device(pdev))
> + printk (KERN_ERR "%s: device setup failed most egregiously\n",
> + sym_name(np));
Is the failure of pci_enable_device ignored on purpose?
(plus extra space)
> +
> + pci_set_master(pdev);
> + enable_irq (pdev->irq);
Spurious space.
> +
> + /* Perform host reset only on one instance of the card */
> + if (0 == PCI_FUNC (pdev->devfn)) {
Ditto.
> + if (sym_reset_scsi_bus(np, 0)) {
> + printk(KERN_ERR "%s: Unable to reset scsi host controller\n",
> + sym_name(np));
> + return PCI_ERS_RESULT_DISCONNECT;
> + }
> + sym_start_up (np, 1);
Ditto.
> + }
> +
> + return PCI_ERS_RESULT_RECOVERED;
> +}
Luca
--
"L'abilita` politica e` l'abilita` di prevedere quello che
accadra` domani, la prossima settimana, il prossimo mese e
l'anno prossimo. E di essere cosi` abili, piu` tardi,
da spiegare perche' non e` accaduto."
More information about the Linuxppc-dev
mailing list