[PATCH 1/3] POWERPC: Added devicetree for mpc8272ads board
Vitaly Bordug
vbordug at ru.mvista.com
Fri Sep 22 12:48:27 EST 2006
This adds current dts file used with MPC8272ADS,
introducing new mdio bitbang defines, as well as
fully-CPM2-SoC board design.
Signed-off-by: Vitaly Bordug <vbordug at ru.mvista.com>
---
arch/powerpc/boot/dts/mpc8272ads.dts | 236 ++++++++++++++++++++++++++++++++++
1 files changed, 236 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
new file mode 100644
index 0000000..6d72b7d
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -0,0 +1,236 @@
+/*
+ * MPC8272 ADS Device Tree Source
+ *
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/*
+/memreserve/ 00000000 4000000;
+*/
+
+/ {
+ model = "MPC8272ADS";
+ compatible = "MPC8260ADS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8272 at 0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <4000>; // L1, 16K
+ i-cache-size = <4000>; // L1, 16K
+ timebase-frequency = <17d7840>;
+ bus-frequency = <5f5e100>;
+ clock-frequency = <17D78400>;
+ 32-bit;
+ linux,phandle = <201>;
+ linux,boot-cpu;
+ };
+ };
+
+ interrupt-controller at f8200000 {
+ linux,phandle = <f8200000>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <f8200000 f8200004>;
+ built-in;
+ device_type = "pci-pic";
+ };
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 4000000 f4500000 00000020>;
+ };
+
+ chosen {
+ name = "chosen";
+ bootargs = "root=/dev/nfs rw ip=on";
+ linux,stdout-path = "/dev/ttyCPM0";
+ linux,platform = <0>;
+ interrupt-controller = <10c00>;
+ linux,phandle = <400>;
+ };
+
+ soc8272 at f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = < 0 0 2 00000000 f0000000 00053000>;
+ reg = <f0000000 0>;
+
+ mdio at 0 {
+ device_type = "mdio";
+ compatible = "fs_enet";
+ reg = <0 0>;
+ linux,phandle = <24520>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-phy at 0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <10c00>;
+ interrupts = <19 1>;
+ reg = <0>;
+ bitbang = [ 12 12 13 02 02 01 ];
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy at 1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <10c00>;
+ interrupts = <19 1>;
+ bitbang = [ 12 12 13 02 02 01 ];
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet at 24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ device-id = <2>;
+ compatible = "fs_enet";
+ model = "FCC";
+ reg = <11300 20 8400 100 11380 30>;
+ mac-address = [ 00 11 2F 99 43 54 ];
+ interrupts = <20 2>;
+ interrupt-parent = <10c00>;
+ phy-handle = <2452000>;
+ rx-clock = <13>;
+ tx-clock = <12>;
+ };
+
+ ethernet at 25000 {
+ device_type = "network";
+ device-id = <3>;
+ compatible = "fs_enet";
+ model = "FCC";
+ reg = <11320 20 8500 100 113b0 30>;
+ mac-address = [ 00 11 2F 99 44 54 ];
+ interrupts = <21 2>;
+ interrupt-parent = <10c00>;
+ phy-handle = <2452001>;
+ rx-clock = <17>;
+ tx-clock = <18>;
+ };
+
+ cpm at f0000000 {
+ linux,phandle = <f0000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "cpm";
+ model = "CPM2";
+ ranges = <00000000 00000000 3ffff>;
+ reg = <10d80 3280>;
+ command-proc = <119c0>;
+ brg-frequency = <17D7840>;
+ cpm_clk = <BEBC200>;
+
+ scc at 11a00 {
+ device_type = "serial";
+ compatible = "cpm_uart";
+ model = "SCC";
+ device-id = <2>;
+ reg = <11a00 20 8000 100>;
+ current-speed = <1c200>;
+ interrupts = <28 2>;
+ interrupt-parent = <10c00>;
+ clock-setup = <0 00ffffff>;
+ rx-clock = <1>;
+ tx-clock = <1>;
+ };
+
+ scc at 11a60 {
+ device_type = "serial";
+ compatible = "cpm_uart";
+ model = "SCC";
+ device-id = <5>;
+ reg = <11a60 20 8300 100>;
+ current-speed = <1c200>;
+ interrupts = <2b 2>;
+ interrupt-parent = <10c00>;
+ clock-setup = <1b ffffff00>;
+ rx-clock = <4>;
+ tx-clock = <4>;
+ };
+
+ };
+ interrupt-controller at 10c00 {
+ linux,phandle = <10c00>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <10c00 80>;
+ built-in;
+ device_type = "cpm-pic";
+ };
+ pci at 0500 {
+ linux,phandle = <0500>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "8272";
+ device_type = "pci";
+ reg = <10430 4dc>;
+ clock-frequency = <3f940aa>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x16 */
+ b000 0 0 1 f8200000 40 0
+ b000 0 0 2 f8200000 41 0
+ b000 0 0 3 f8200000 42 0
+ b000 0 0 4 f8200000 43 0
+
+ /* IDSEL 0x17 */
+ b800 0 0 1 f8200000 43 0
+ b800 0 0 2 f8200000 40 0
+ b800 0 0 3 f8200000 41 0
+ b800 0 0 4 f8200000 42 0
+
+ /* IDSEL 0x18 */
+ c000 0 0 1 f8200000 42 0
+ c000 0 0 2 f8200000 43 0
+ c000 0 0 3 f8200000 40 0
+ c000 0 0 4 f8200000 41 0>;
+ interrupt-parent = <10c00>;
+ interrupts = <14 3>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 40000000
+ 01000000 0 00000000 f6000000 0 02000000>;
+ };
+
+/* May need to remove if on a part without crypto engine */
+ crypto at 30000 {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "talitos";
+ reg = <30000 10000>;
+ interrupts = <b 0>;
+ interrupt-parent = <10c00>;
+ num-channels = <4>;
+ channel-fifo-len = <18>;
+ exec-units-mask = <0000007e>;
+/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
+ descriptor-types-mask = <01010ebf>;
+ };
+
+ };
+};
More information about the Linuxppc-dev
mailing list