[PATCH 6/6] Add support for the sandpoint platform
Mark A. Greer
mgreer at mvista.com
Fri Sep 8 13:41:37 EST 2006
This patch adds support for the Freescale Sandpoint platform
to the bootwrapper.
Signed-off-by: Mark A. Greer <mgreer at mvista.com>
--
boot/Makefile | 3
boot/dts/sandpoint.dts | 218 +++++++
boot/mpc10x.c | 109 +++
boot/sandpoint.c | 147 +++++
configs/sandpoint_defconfig | 1111 ++++++++++++++++++++++++++++++++++++++
platforms/embedded6xx/Kconfig | 2
platforms/embedded6xx/Makefile | 1
platforms/embedded6xx/sandpoint.c | 385 +++++++++++++
8 files changed, 1976 insertions(+)
--
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index f1877ac..44a3055 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -42,6 +42,9 @@ src-boot += of.c
else
src-boot += flatdevtree_misc.c
endif
+ifeq ($(CONFIG_SANDPOINT),y)
+src-boot += sandpoint.c mpc10x.c simple_alloc.c serial.c ns16550.c util.S
+endif
src-boot += $(zlib)
src-boot := $(addprefix $(obj)/, $(src-boot))
obj-boot := $(addsuffix .o, $(basename $(src-boot)))
diff --git a/arch/powerpc/boot/dts/sandpoint.dts b/arch/powerpc/boot/dts/sandpoint.dts
new file mode 100644
index 0000000..016d57a
--- /dev/null
+++ b/arch/powerpc/boot/dts/sandpoint.dts
@@ -0,0 +1,218 @@
+/*
+ * Device Tree Souce for Freescale Sandpoint
+ *
+ * Author: Mark A. Greer <mgreer at mvista.com>
+ *
+ * 2006 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * add flash parts, rtc, ??
+ *
+ * To build:
+ * dtc -I dts -O asm -o sandpoint.S -V 16 sandpoint.dts
+ * dtc -I dts -O dtb -o sandpoint.dtb -V 16 sandpoint.dts
+ */
+
+/ {
+ linux,phandle = <1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "Sandpoint X3";
+ compatible = "Sandpoint";
+
+ cpus {
+ linux,phandle = <2000>;
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,603e { /* Really 75x, 74xx, 824x */
+ linux,phandle = <2100>;
+ linux,boot-cpu;
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <0>; /* Set by bootwrapper */
+ timebase-frequency = <0>; /* Set by bootwrapper */
+ /* Following required by dtc but not used */
+ i-cache-line-size = <0>;
+ d-cache-line-size = <0>;
+ i-cache-size = <0>;
+ d-cache-size = <0>;
+ };
+ };
+
+ memory {
+ linux,phandle = <3000>;
+ device_type = "memory";
+ reg = <00000000 00000000>; /* Set by bootwrapper */
+ };
+
+ soc10x at fc000000 { /* Freescale/Tundra MPC10x */
+ linux,phandle = <4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ compatible = "mpc10x";
+ store-gathering = <0>; /* 0 == off, !0 == on */
+ bug-frequency = <0>; /* Set by bootwrapper */
+ reg = <fc000000 00100000>;
+ ranges = <80000000 80000000 70000000 /* pci mem space */
+ fc000000 fc000000 00100000 /* EUMB */
+ fe000000 fe000000 00c00000 /* pci i/o space */
+ fec00000 fec00000 00300000 /* pci cfg regs */
+ fef00000 fef00000 00100000 >; /* pci iack */
+
+ dma at fc001100 {
+ linux,phandle = <4100>;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "dma";
+ compatible = "fsl-dma";
+ clock-frequency = <0>;
+ reg = <fc001100 24>;
+ interrupts = <33 0>;
+ interrupt-parent = <4400>;
+ };
+
+ dma at fc001200 {
+ linux,phandle = <4200>;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "dma";
+ compatible = "fsl-dma";
+ clock-frequency = <0>;
+ reg = <fc001200 24>;
+ interrupts = <34 0>;
+ interrupt-parent = <4400>;
+ };
+
+ i2c at fc003000 {
+ linux,phandle = <4300>;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ clock-frequency = <0>;
+ reg = <fc003000 1000>;
+ interrupts = <32 0>;
+ interrupt-parent = <4400>;
+ };
+
+ pic at fc040000 { /* EPIC */
+ linux,phandle = <4400>;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ device_type = "open-pic";
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ reg = <fc040000 40000>;
+ clock-frequency = <0>;
+ clock-ratio = <7>;
+ serial-mode = <1>;
+ built-in;
+ };
+
+ pci at fec00000 {
+ linux,phandle = <4500>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "mpc10x-pci";
+ reg = <fec00000 00400000>;
+ ranges = <01000000 0 0 fe000000 0 00c00000
+ 02000000 0 80000000 80000000 0 70000000>;
+ bus-range = <0 ff>;
+ clock-frequency = <7f28155>;
+ interrupt-pci-iack = <fef00000>; /* New - PCI IACK */
+ interrupt-parent = <4400>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0b - i8259 on Windbond */
+ 5800 0 0 1 4400 0 0
+ 5800 0 0 2 4400 0 0
+ 5800 0 0 3 4400 0 0
+ 5800 0 0 4 4400 0 0
+ /* IDSEL 0x0d - PCI slot 1 */
+ 6800 0 0 1 4400 2 0
+ 6800 0 0 2 4400 5 0
+ 6800 0 0 3 4400 4 0
+ 6800 0 0 4 4400 3 0
+ /* IDSEL 0x0e - PCI slot 2 */
+ 7000 0 0 1 4400 3 0
+ 7000 0 0 2 4400 2 0
+ 7000 0 0 3 4400 5 0
+ 7000 0 0 4 4400 4 0
+ /* IDSEL 0x0f - PCI slot 3 */
+ 7800 0 0 1 4400 4 0
+ 7800 0 0 2 4400 3 0
+ 7800 0 0 3 4400 2 0
+ 7800 0 0 4 4400 5 0
+ /* IDSEL 0x10 - PCI slot 4 */
+ 8000 0 0 1 4400 5 0
+ 8000 0 0 2 4400 4 0
+ 8000 0 0 3 4400 3 0
+ 8000 0 0 4 4400 2 0
+ >;
+
+ isa {
+ linux,phandle = <4510>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "isa";
+ compatible = "isa";
+ ranges = <1 0 01000000 0 0 00800000>;
+ interrupt-parent = <4511>;
+
+ i8259 at 4d0 {
+ linux,phandle = <4511>;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ device_type = "interrupt-controller";
+ compatible = "chrp,iic";
+ interrupt-controller;
+ clock-frequency = <0>;
+ built-in;
+ interrupt-parent = <4400>;
+ interrupts = < 0 0 >;
+ };
+
+ serial at 3f8 {
+ linux,phandle = <4512>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <1 3f8 8>;
+ clock-frequency = <1c2000>;
+ current-speed = <2580>;
+ interrupts = <4 0>;
+ };
+
+ serial at 2f8 {
+ linux,phandle = <4513>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <1 2f8 8>;
+ clock-frequency = <1c2000>;
+ current-speed = <2580>;
+ interrupts = <3 0>;
+ };
+ };
+ };
+ };
+
+ chosen {
+ linux,phandle = <5000>;
+ linux,platform = <1>;
+ bootargs = "ip=on";
+ /* bootargs = "ip=on"; */
+ linux,stdout-path = "/soc10x at fc000000/pci at fec00000/isa/serial at 3f8";
+ interrupt-controller = <4400>;
+ };
+};
diff --git a/arch/powerpc/boot/mpc10x.c b/arch/powerpc/boot/mpc10x.c
new file mode 100644
index 0000000..3e4de93
--- /dev/null
+++ b/arch/powerpc/boot/mpc10x.c
@@ -0,0 +1,109 @@
+/*
+ * Freescale mpc10[67] & mpc824[015] specific code.
+ *
+ * Author: Mark A. Greer <mgreer at mvista.com>
+ *
+ * 2001 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "string.h"
+#include "stdio.h"
+#include "io.h"
+
+/* Map B (CHRP Map) Defines */
+#define MPC10X_MAPB_CNFG_ADDR 0xfec00000
+#define MPC10X_MAPB_CNFG_DATA 0xfee00000
+
+/* Define offsets for the memory controller registers in the config space */
+#define MPC10X_MCTLR_MEM_START_1 0x80 /* Banks 0-3 */
+#define MPC10X_MCTLR_MEM_START_2 0x84 /* Banks 4-7 */
+#define MPC10X_MCTLR_EXT_MEM_START_1 0x88 /* Banks 0-3 */
+#define MPC10X_MCTLR_EXT_MEM_START_2 0x8c /* Banks 4-7 */
+
+#define MPC10X_MCTLR_MEM_END_1 0x90 /* Banks 0-3 */
+#define MPC10X_MCTLR_MEM_END_2 0x94 /* Banks 4-7 */
+#define MPC10X_MCTLR_EXT_MEM_END_1 0x98 /* Banks 0-3 */
+#define MPC10X_MCTLR_EXT_MEM_END_2 0x9c /* Banks 4-7 */
+
+#define MPC10X_MCTLR_MEM_BANK_ENABLES 0xa0
+
+#define PCI_DEVFN(slot,func) ((((slot) & 0x1f) << 3) | ((func) & 0x07))
+
+/* Indirect PCI config space access routines */
+static inline void
+pci_indirect_read_config_byte(u32 *cfg_addr, u32 *cfg_data, int devfn,
+ int offset, u8 *val)
+{
+ out_be32(cfg_addr,
+ ((offset & 0xfc) << 24) | (devfn << 16) | (0 << 8) | 0x80);
+ *val = in_8((u8 *)(cfg_data + (offset & 3)));
+ return;
+}
+
+static inline void
+pci_indirect_read_config_dword(u32 *cfg_addr, u32 *cfg_data, int devfn,
+ int offset, u32 *val)
+{
+ out_be32(cfg_addr,
+ ((offset & 0xfc) << 24) | (devfn << 16) | (0 << 8) | 0x80);
+ *val = in_le32(cfg_data + (offset & 3));
+ return;
+}
+
+/*
+ * Read the memory controller registers to determine the amount of memory in
+ * the system. This assumes that the firmware has correctly set up the memory
+ * controller registers.
+ * Assume memory map B (CHRP).
+ */
+u32
+mpc10x_get_mem_size(void)
+{
+ u32 *config_addr, *config_data, val;
+ u32 start, end, total, offset, i;
+ u8 bank_enables;
+
+ config_addr = (u32 *)MPC10X_MAPB_CNFG_ADDR;
+ config_data = (u32 *)MPC10X_MAPB_CNFG_DATA;
+
+ pci_indirect_read_config_byte(config_addr, config_data, PCI_DEVFN(0,0),
+ MPC10X_MCTLR_MEM_BANK_ENABLES, &bank_enables);
+
+ total = 0;
+
+ for (i=0; i<8; i++) {
+ if (bank_enables & (1 << i)) {
+ offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0);
+ pci_indirect_read_config_dword(config_addr, config_data,
+ PCI_DEVFN(0,0), offset, &val);
+ start = (val >> ((i & 3) << 3)) & 0xff;
+
+ offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0);
+ pci_indirect_read_config_dword(config_addr, config_data,
+ PCI_DEVFN(0,0), offset, &val);
+ val = (val >> ((i & 3) << 3)) & 0x03;
+ start = (val << 28) | (start << 20);
+
+ offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0);
+ pci_indirect_read_config_dword(config_addr, config_data,
+ PCI_DEVFN(0,0), offset, &val);
+ end = (val >> ((i & 3) << 3)) & 0xff;
+
+ offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0);
+ pci_indirect_read_config_dword(config_addr, config_data,
+ PCI_DEVFN(0,0), offset, &val);
+ val = (val >> ((i & 3) << 3)) & 0x03;
+ end = (val << 28) | (end << 20) | 0xfffff;
+
+ total += (end - start + 1);
+ }
+ }
+
+ return total;
+}
diff --git a/arch/powerpc/boot/sandpoint.c b/arch/powerpc/boot/sandpoint.c
new file mode 100644
index 0000000..7062c16
--- /dev/null
+++ b/arch/powerpc/boot/sandpoint.c
@@ -0,0 +1,147 @@
+/*
+ * Sandpoint specific fixups.
+ *
+ * Author: Mark A. Greer <mgreer at mvista.com>
+ *
+ * 2006 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "string.h"
+#include "stdio.h"
+#include "io.h"
+#include "ops.h"
+
+#define CPU_824X 0
+#define CPU_7XX 1
+#define CPU_7457 2
+#define CPU_NUM 3
+
+static u32 cpu_pll[CPU_NUM][32] = {
+ [CPU_824X] = { /* 824x */
+ 5, 6, 9, 4, 4, 5, 2, 6, 6, 4, 9, 6, 5, 7, 6, 7,
+ 4, 5, 4, 6, 7, 8, 8, 4, 6, 5, 8, 6, 6, 5, 7, 0
+ },
+ [CPU_7XX] = { /* 750/755 */
+ 0, 15, 14, 2, 4, 13, 20, 9, 6, 11, 8, 10, 16, 12, 7, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+
+ },
+ [CPU_7457] = { /* 7457 */
+ 23, 34, 15, 30, 14, 36, 2, 40, 4, 42, 13, 26, 17, 48, 19, 18,
+ 6, 21, 11, 22, 8, 20, 10, 24, 16, 28, 12, 32, 27, 56, 0, 25
+ }
+};
+
+static struct processor_info {
+ u32 pvr;
+ u32 mask;
+ u32 bus_freq;
+ u32 hid1_shift;
+ u32 hid1_mask;
+ u32 pll_tbl_idx;
+ u32 max_mem; /* DINK still sets up mem ctlr wrong */
+} processor_info_tbl[] = { /* From cputable -- MHz are only guesses */
+ /* 824x */
+ { 0x00810000, 0x7fff0000, 100000000, 27, 0x1f, CPU_824X, 0x08000000 },
+ /* 750 */
+ { 0x00084202, 0xffffffff, 100000000, 28, 0xf, CPU_7XX, 0x02000000 },
+ /* 745/755 */
+ { 0x00083000, 0xfffff000, 100000000, 28, 0xf, CPU_7XX, 0x02000000 },
+ /* 7447/7457 Rev 1.0 */
+ { 0x80020100, 0xffffffff, 100000000, 12, 0x1f, CPU_7457, 0x04000000 },
+ /* 7447/7457 Rev 1.1 */
+ { 0x80020101, 0xffffffff, 100000000, 12, 0x1f, CPU_7457, 0x04000000 },
+ /* 7447/7457 Rev 1.2 & up*/
+ { 0x80020000, 0xffff0000, 100000000, 12, 0x1f, CPU_7457, 0x04000000 },
+ /* 7447A */
+ { 0x80030000, 0xffff0000, 100000000, 12, 0x1f, CPU_7457, 0x80000000 },
+};
+
+static struct processor_info *get_processor_info(u32 pvr)
+{
+ struct processor_info *pit = processor_info_tbl;
+ u32 i;
+
+ for (i=0; i<ARRAY_SIZE(processor_info_tbl); i++, pit++)
+ if (pit->pvr == (pvr & pit->mask))
+ return pit;
+ return NULL;
+}
+
+#define __stringify_1(x) #x
+#define __stringify(x) __stringify_1(x)
+
+#define SPRN_PVR 0x11F /* Processor Version Register */
+#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
+#define mfspr(rn) ({unsigned long rval; \
+ asm volatile("mfspr %0," __stringify(rn) \
+ : "=r" (rval)); rval;})
+
+static void sandpoint_fixups(void)
+{
+ u32 i, v[2], hid1, max_mem = 0xffffffff;
+ void *devp;
+ struct processor_info *pit;
+ extern u32 mpc10x_get_mem_size(void);
+
+ /* Update cpu's clock-frequency & timebase-frequency in fdt */
+ if ((pit = get_processor_info(mfspr(SPRN_PVR)))) {
+ if ((devp = finddevice("/cpus/PowerPC,603e"))) {
+ max_mem = pit->max_mem;
+
+ hid1 = (mfspr(SPRN_HID1) >> pit->hid1_shift)
+ & pit->hid1_mask;
+ v[0] = pit->bus_freq
+ * cpu_pll[pit->pll_tbl_idx][hid1]/2;
+ setprop(devp, "clock-frequency", v, sizeof(v[0]));
+
+ v[0] = pit->bus_freq / 4;
+ setprop(devp, "timebase-frequency", v, sizeof(v[0]));
+ }
+ if ((devp = finddevice("/soc10x at fc000000")))
+ setprop(devp, "clock-frequency", &pit->bus_freq,
+ sizeof(u32));
+ }
+
+ /* Get the RAM size from the memory controller & update fdt */
+ if ((devp = finddevice("/memory"))) {
+ i = mpc10x_get_mem_size();
+ v[0] = 0;
+ v[1] = min(i, max_mem);
+ setprop(devp, "reg", v, sizeof(v));
+ }
+
+ /* XXXX stuff from platforms/.../sandpoint.c should be here */
+}
+
+static void sandpoint_reset(void)
+{
+ void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
+ _nmask_and_or_msr(0, (1<<6)); /* Set exception prefix high - firmware */
+
+ /* Reset system via Port 92 */
+ out_8((volatile unsigned char *)0xfe000092, 0x00);
+ out_8((volatile unsigned char *)0xfe000092, 0x01);
+
+ for(;;); /* Spin until reset happens */
+}
+
+int platform_init(void *promptr)
+{
+ /* dt_ops should already be set up in start() */
+ if (!dt_ops.finddevice || !dt_ops.getprop || !dt_ops.setprop
+ || !dt_ops.translate_addr || !dt_ops.call_kernel)
+ return -1;
+
+ platform_ops.fixups = sandpoint_fixups;
+ platform_ops.exit = sandpoint_reset;
+ simple_alloc_init();
+
+ return serial_console_init();
+}
diff --git a/arch/powerpc/configs/sandpoint_defconfig b/arch/powerpc/configs/sandpoint_defconfig
new file mode 100644
index 0000000..bfbb9b8
--- /dev/null
+++ b/arch/powerpc/configs/sandpoint_defconfig
@@ -0,0 +1,1111 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.18-rc5
+# Thu Sep 7 16:24:12 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_DEFAULT_UIMAGE is not set
+
+#
+# Processor support
+#
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_SMP is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_PPC_ISERIES is not set
+CONFIG_EMBEDDED6xx=y
+# CONFIG_APUS is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+CONFIG_PPC_TODC=y
+# CONFIG_KATANA is not set
+# CONFIG_WILLOW is not set
+# CONFIG_CPCI690 is not set
+# CONFIG_POWERPMC250 is not set
+# CONFIG_CHESTNUT is not set
+# CONFIG_SPRUCE is not set
+# CONFIG_HDPU is not set
+# CONFIG_EV64260 is not set
+# CONFIG_LOPEC is not set
+# CONFIG_MVME5100 is not set
+# CONFIG_PPLUS is not set
+# CONFIG_PRPMC750 is not set
+# CONFIG_PRPMC800 is not set
+CONFIG_SANDPOINT=y
+# CONFIG_MPC7448HPC2 is not set
+# CONFIG_RADSTONE_PPC7D is not set
+# CONFIG_PAL4 is not set
+# CONFIG_GEMINI is not set
+# CONFIG_EST8260 is not set
+# CONFIG_SBC82xx is not set
+# CONFIG_SBS8260 is not set
+# CONFIG_RPX8260 is not set
+# CONFIG_TQM8260 is not set
+# CONFIG_ADS8272 is not set
+# CONFIG_PQ2FADS is not set
+# CONFIG_LITE5200 is not set
+# CONFIG_EV64360 is not set
+CONFIG_PPC_GEN550=y
+CONFIG_EPIC_SERIAL_MODE=y
+CONFIG_MPC10X_BRIDGE=y
+CONFIG_MPC10X_OPENPIC=y
+# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_SANDPOINT_ENABLE_UART1 is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=m
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+CONFIG_IP_DCCP_CCID3=m
+CONFIG_IP_DCCP_TFRC_LIB=m
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_SL82C105=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_PCMCIA_XIRCOM is not set
+# CONFIG_PCMCIA_XIRTULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+CONFIG_NVRAM=y
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUGGER is not set
+CONFIG_BDI_SWITCH=y
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 234a861..e5ac829 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -69,7 +69,9 @@ config PRPMC800
config SANDPOINT
bool "Motorola-Sandpoint"
+ select MPIC
select PPC_I8259
+ select PPC_UDBG_16550
help
Select SANDPOINT if configuring for a Motorola Sandpoint X3
(any flavor).
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index fa499fe..042b6ca 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -2,3 +2,4 @@ #
# Makefile for the 6xx/7xx/7xxxx linux kernel.
#
obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o
+obj-$(CONFIG_SANDPOINT) += sandpoint.o
diff --git a/arch/powerpc/platforms/embedded6xx/sandpoint.c b/arch/powerpc/platforms/embedded6xx/sandpoint.c
new file mode 100644
index 0000000..56b7746
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/sandpoint.c
@@ -0,0 +1,385 @@
+/*
+ * Board setup routines for the Freescale Sandpoint Test Platform.
+ *
+ * Author: Mark A. Greer <mgreer at mvista.com>
+ *
+ * 2000-2003 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * This file adds support for the Freescale Sandpoint Test Platform.
+ * These boards have a PPMC slot for the processor so any combination
+ * of cpu and host bridge can be attached. This port is for an 8240 PPMC
+ * module from Freescale and other closely related cpu/host bridge
+ * combinations (e.g., 750/755/7400 with MPC107 host bridge).
+ * The sandpoint itself has a Windbond 83c553 (PCI-ISA bridge, 2 DMA ctlrs, 2
+ * cascaded 8259 interrupt ctlrs, 8254 Timer/Counter, and an IDE ctlr), a
+ * National 87308 (RTC, 2 UARTs, Keyboard & mouse ctlrs, and a floppy ctlr),
+ * and 4 PCI slots (only 2 of which are usable; the other 2 are keyed for 3.3V
+ * but are really 5V).
+ *
+ * The firmware on the sandpoint is called DINK (not my acronym :). This port
+ * depends on DINK to do some basic initialization (e.g., initialize the memory
+ * ctlr) and to ensure that the processor is using MAP B (CHRP map).
+ *
+ * Since Freescale listened to our suggestions for improvement, we now have
+ * the Sandpoint X3 board. All of the PCI slots are available, it uses
+ * the serial interrupt interface (just a hardware thing we need to
+ * configure properly).
+ *
+ * Use the default X3 switch settings. The interrupts are then:
+ * EPIC Source
+ * 0 SIOINT (8259, active low)
+ * 1 PCI #1
+ * 2 PCI #2
+ * 3 PCI #3
+ * 4 PCI #4
+ * 7 Winbond INTC (IDE interrupt)
+ * 8 Winbond INTD (IDE interrupt)
+ *
+ *
+ * Freescale has finally released a version of DINK32 that correctly
+ * (seemingly) initalizes the memory controller correctly, regardless
+ * of the amount of memory in the system. Once a method of determining
+ * what version of DINK initializes the system for us, if applicable, is
+ * found, we can hopefully stop hardcoding 32MB of RAM.
+ */
+
+#include <linux/initrd.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/root_dev.h>
+
+#include <asm/time.h>
+#include <asm/i8259.h>
+#include <asm/udbg.h>
+#include <asm/todc.h>
+#include <asm/mpic.h>
+#include <asm/todc.h>
+
+/*
+ * Interrupt setup and service. Interrrupts on the Sandpoint come
+ * from the four PCI slots plus the 8259 in the Winbond Super I/O (SIO).
+ * The 8259 is cascaded from EPIC IRQ0, IRQ1-4 map to PCI slots 1-4,
+ * IDE is on EPIC 7 and 8.
+ */
+static void sandpoint_8259_cascade(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
+{
+ unsigned int cascade_irq = i8259_irq(regs);
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq, regs);
+ desc->chip->eoi(irq);
+}
+
+static void __init
+sandpoint_init_irq(void)
+{
+ struct mpic *mpic;
+ struct device_node *dnp, *cascade_node = NULL;
+ void *prop;
+ int size;
+ unsigned int cascade_irq;
+ phys_addr_t paddr;
+
+ dnp = of_find_node_by_type(NULL, "open-pic");
+ if (dnp == NULL)
+ return;
+
+ prop = (struct device_node *)get_property(dnp, "reg", &size);
+ paddr = (phys_addr_t)of_translate_address(dnp, prop);
+
+ mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY, 0, 0, " EPIC ");
+
+ prop = (struct device_node *)get_property(dnp, "clock-ratio", &size);
+ if (prop != NULL)
+ mpic_set_clk_ratio(mpic, *(u32 *)prop);
+
+ prop = (struct device_node *)get_property(dnp, "serial-mode", &size);
+ if (prop != NULL)
+ mpic_set_serial_int(mpic, *(u32 *)prop);
+
+ mpic_assign_isu(mpic, 0, paddr + 0x10200);
+ mpic_init(mpic);
+
+ for_each_node_by_type(dnp, "interrupt-controller")
+ if (device_is_compatible(dnp, "chrp,iic")) {
+ cascade_node = dnp;
+ break;
+ }
+
+ if (cascade_node == NULL)
+ return;
+
+ cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+
+ if (cascade_irq == NO_IRQ)
+ return;
+
+ i8259_init(cascade_node, 0);
+ set_irq_chained_handler(cascade_irq, sandpoint_8259_cascade);
+}
+
+static int __init
+add_bridge(struct device_node *dev)
+{
+ int len;
+ struct pci_controller *hose;
+ int *bus_range;
+
+ printk("Adding PCI host bridge %s\n", dev->full_name);
+
+ bus_range = (int *) get_property(dev, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int))
+ printk(KERN_WARNING "Can't get bus-range for %s, assume"
+ " bus 0\n", dev->full_name);
+
+ hose = pcibios_alloc_controller();
+ if (hose == NULL)
+ return -ENOMEM;
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+ setup_indirect_pci(hose, 0xfec00000, 0xfee00000);
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ pci_process_bridge_OF_ranges(hose, dev, 1);
+ return 0;
+}
+
+/*
+ * Freescale Sandpoint interrupt routing.
+ */
+static inline int
+x3_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ { 0, 0, 0, 0 }, /* IDSEL 11 - i8259 on Winbond */
+ { 0, 0, 0, 0 }, /* IDSEL 12 - unused */
+ { 2, 5, 4, 3 }, /* IDSEL 13 - PCI slot 1 */
+ { 3, 2, 5, 4 }, /* IDSEL 14 - PCI slot 2 */
+ { 4, 3, 2, 5 }, /* IDSEL 15 - PCI slot 3 */
+ { 5, 4, 3, 2 }, /* IDSEL 16 - PCI slot 4 */
+ };
+
+ const long min_idsel = 11, max_idsel = 16, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+#ifdef CONFIG_PPC_TODC
+TODC_ALLOC()
+#endif
+
+static void __init
+sandpoint_setup_arch(void)
+{
+ struct device_node *dnp;
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+
+ for (dnp = NULL; (dnp=of_find_node_by_type(dnp,"pci")) != NULL;)
+ add_bridge(dnp);
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_map_irq = x3_map_irq;
+
+ printk(KERN_INFO "Port by MontaVista Software, Inc. <source at mvista.com>\n");
+
+#ifdef CONFIG_PPC_TODC
+ TODC_INIT(TODC_TYPE_PC97307, 0x70, 0x00, 0x71, 8);
+
+ ppc_md.nvram_read_val = todc_mc146818_read_val;
+ ppc_md.nvram_write_val = todc_mc146818_write_val;
+
+ ppc_md.time_init = todc_time_init;
+ ppc_md.set_rtc_time = todc_set_rtc_time;
+ ppc_md.get_rtc_time = todc_get_rtc_time;
+#endif
+
+ /* DINK32 12.3 and below do not correctly enable any caches.
+ * We will do this now with good known values. Future versions
+ * of DINK32 are supposed to get this correct.
+ */
+ if (cpu_has_feature(CPU_FTR_SPEC7450))
+ /* 745x is different. We only want to pass along enable. */
+ _set_L2CR(L2CR_L2E);
+ else if (cpu_has_feature(CPU_FTR_L2CR))
+ /* All modules have 1MB of L2. We also assume that an
+ * L2 divisor of 3 will work.
+ */
+ _set_L2CR(L2CR_L2E | L2CR_L2SIZ_1MB | L2CR_L2CLK_DIV3
+ | L2CR_L2RAM_PIPE | L2CR_L2OH_1_0 | L2CR_L2DF);
+#if 0
+ /* Untested right now. */
+ if (cpu_has_feature(CPU_FTR_L3CR)) {
+ /* Magic value. */
+ _set_L3CR(0x8f032000);
+ }
+#endif
+}
+
+static void
+sandpoint_restart(char *cmd)
+{
+ void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
+
+ local_irq_disable();
+ _nmask_and_or_msr(0, MSR_IP); /* Set exception prefix high - firmware */
+
+ /* Reset system via Port 92 */
+ outb(0x00, 0x92);
+ outb(0x01, 0x92);
+
+ for(;;); /* Spin until reset happens */
+}
+
+static void
+sandpoint_power_off(void)
+{
+ local_irq_disable();
+ for(;;); /* No way to shut power off with software */
+ /* NOTREACHED */
+}
+
+static void
+sandpoint_halt(void)
+{
+ sandpoint_power_off();
+ /* NOTREACHED */
+}
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+/*
+ * IDE support.
+ */
+static int sandpoint_ide_ports_known = 0;
+static unsigned long sandpoint_ide_regbase[MAX_HWIFS];
+static unsigned long sandpoint_ide_ctl_regbase[MAX_HWIFS];
+static unsigned long sandpoint_idedma_regbase;
+
+static void
+sandpoint_ide_probe(void)
+{
+ struct pci_dev *pdev = pci_get_device(PCI_VENDOR_ID_WINBOND,
+ PCI_DEVICE_ID_WINBOND_82C105, NULL);
+
+ if (pdev) {
+ sandpoint_ide_regbase[0]=pdev->resource[0].start;
+ sandpoint_ide_regbase[1]=pdev->resource[2].start;
+ sandpoint_ide_ctl_regbase[0]=pdev->resource[1].start;
+ sandpoint_ide_ctl_regbase[1]=pdev->resource[3].start;
+ sandpoint_idedma_regbase=pdev->resource[4].start;
+ pci_dev_put(pdev);
+ }
+
+ sandpoint_ide_ports_known = 1;
+}
+
+static unsigned long
+sandpoint_ide_default_io_base(int index)
+{
+ if (sandpoint_ide_ports_known == 0)
+ sandpoint_ide_probe();
+
+ return sandpoint_ide_regbase[index];
+}
+
+static void __init
+sandpoint_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
+ unsigned long ctrl_port, int *irq)
+{
+ unsigned long reg = data_port;
+ uint alt_status_base;
+ int i;
+
+ for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
+ hw->io_ports[i] = reg++;
+ }
+
+ if (data_port == sandpoint_ide_regbase[0]) {
+ alt_status_base = sandpoint_ide_ctl_regbase[0] + 2;
+ hw->irq = 14;
+ }
+ else if (data_port == sandpoint_ide_regbase[1]) {
+ alt_status_base = sandpoint_ide_ctl_regbase[1] + 2;
+ hw->irq = 15;
+ }
+ else {
+ alt_status_base = 0;
+ hw->irq = 0;
+ }
+
+ if (ctrl_port) {
+ hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
+ } else {
+ hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base;
+ }
+
+ if (irq != NULL) {
+ *irq = hw->irq;
+ }
+}
+
+static int __init
+sandpoint_ide_init(void)
+{
+ /* doesn't find hda without this */
+ ppc_ide_md.default_io_base = sandpoint_ide_default_io_base;
+ /* get error msgs without this */
+ ppc_ide_md.ide_init_hwif = sandpoint_ide_init_hwif_ports;
+ return 0;
+}
+arch_initcall(sandpoint_ide_init);
+#endif
+
+void __init
+sandpoint_pcibios_fixup(void)
+{
+ struct pci_dev *dev = NULL;
+
+ for_each_pci_dev(dev)
+ pci_read_irq_line(dev);
+}
+
+#define PLATFORM_NAME "Freescale Sandpoint"
+
+static int __init
+sandpoint_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "Sandpoint"))
+ return 1;
+ return 0;
+}
+
+define_machine(sandpoint) {
+ .name = PLATFORM_NAME,
+ .probe = sandpoint_probe,
+ .setup_arch = sandpoint_setup_arch,
+ .init_IRQ = sandpoint_init_irq,
+ .pcibios_fixup = sandpoint_pcibios_fixup,
+ .get_irq = mpic_get_irq,
+ .restart = sandpoint_restart,
+ .power_off = sandpoint_power_off,
+ .halt = sandpoint_halt,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
More information about the Linuxppc-dev
mailing list