[PATCH] Powerpc: Make pci_read_irq_line the default: on mpc7448hpc2 board

Zang Roy-r61911 tie-fei.zang at freescale.com
Sat Oct 28 00:51:22 EST 2006


On Fri, 2006-10-27 at 19:51, Zang Roy-r61911 wrote:
> The following patch updates the tsi108/9 pci interrupt controller code
> on mpc7448hpc2 board.
> 
> The patch should apply after Ben's patch 
> http://ozlabs.org/pipermail/linuxppc-dev/2006-October/027287.html
> 
> Of course, the mpc7448hpc2 part in that patch should be replaced by this
> one :-).
> 
Missed the following line :-)

Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>

> ---
>  arch/powerpc/boot/dts/mpc7448hpc2.dts             |   44 ++++++----
>  arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c |   96 +++++----------------
>  arch/powerpc/sysdev/tsi108_pci.c                  |   63 ++++++++++++--
>  3 files changed, 108 insertions(+), 95 deletions(-)





More information about the Linuxppc-dev mailing list