[PATCH 4/7] Add MPC8360EMDS board support (try 2)

[Kumar Gala]

On Oct 3, 2006, at 11:17 PM, Kim Phillips wrote:

> From: Li Yang <leoli at freescale.com>
>
> The patch adds MPC8360EMDS board support (get_bcsr removed).
>
> Signed-off-by: Li Yang <leoli at freescale.com>
> Signed-off-by: Yin Olivia <hong-hua.yin at freescale.com>
> Signed-off-by: Kim Phillips <kim.phillips at freescale.com>
> ---
>  arch/powerpc/configs/mpc8360emds_defconfig | 1018 +++++++++++++++++ 
> +++++++++++
>  arch/powerpc/platforms/83xx/mpc8360e_pb.c  |  220 ++++++
>  arch/powerpc/platforms/83xx/mpc8360e_pb.h  |   23 +
>  3 files changed, 1261 insertions(+), 0 deletions(-)

What's the point of the mpc8360e_pb.h if there's nothing in it?

Also, any reason the files are _pb and config is emds?

- k