Please pull upstream branch of linux-2.6-PQ.git...

[Kumar Gala]

On Oct 3, 2006, at 1:30 PM, Vitaly Bordug wrote:

> Paul,
>
> Please do a pull from
>
> git://git.kernel.org/pub/scm/linux/kernel/git/vitb/linux-2.6- 
> PQ.git, upstream branch.
>
> Signed-off-by: Vitaly Bordug <vbordug at ru.mvista.com>
>
>
> To receive the updated 8272 addition to the  arch/powerpc.
> All the comments have been addressed, and it has a minor bugfix  
> addressed too in order to make both pq2 and pq3
> co-exist happily in fsl_soc.c. CPM PIC now has "compatible"  
> property that could be "CPM2" or "CPM1" for PQ/8xx.
>
> I think it should go to rc1, because relevant stuff in ppc/ is more  
> or less broken now, with new irq engine.
>
> --
>
>  arch/powerpc/Kconfig                      |    1
>  arch/powerpc/boot/dts/mpc8272ads.dts      |  223 ++++++++++
>  arch/powerpc/platforms/82xx/Kconfig       |   21
>  arch/powerpc/platforms/82xx/Makefile      |    5
>  arch/powerpc/platforms/82xx/m82xx_pci.h   |   19
>  arch/powerpc/platforms/82xx/mpc82xx.c     |  111 +++++
>  arch/powerpc/platforms/82xx/mpc82xx_ads.c |  661 ++++++++++++++++++ 
> ++++++++++++
>  arch/powerpc/platforms/82xx/pq2ads.h      |   67 +++
>  arch/powerpc/sysdev/cpm2_pic.c            |    2
>  arch/powerpc/sysdev/cpm2_pic.h            |    2
>  arch/powerpc/sysdev/fsl_soc.c             |   62 ++
>  11 files changed, 1165 insertions(+), 9 deletions(-)

Are there updates to the flat dev spec for the CPM nodes?  That is my  
only hold up on ack'ing all this good PQ2/PQ3 CPM work.

- k