[PATCH 4/7] Add MPC8360EMDS board support
Kumar Gala
galak at kernel.crashing.org
Tue Oct 3 13:19:14 EST 2006
[snip]
> diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/
> powerpc/platforms/83xx/mpc8360e_pb.c
> new file mode 100644
> index 0000000..4f9fd65
> --- /dev/null
> +++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.c
> @@ -0,0 +1,220 @@
> +/*
> + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights
> reserved.
> + *
> + * Author: Li Yang <LeoLi at freescale.com>
> + * Yin Olivia <Hong-hua.Yin at freescale.com>
> + *
> + * Description:
> + * MPC8360E MDS PB board specific routines.
> + *
> + * Changelog:
> + * Jun 21, 2006 Initial version
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms of the GNU General Public License as
> published by the
> + * Free Software Foundation; either version 2 of the License, or
> (at your
> + * option) any later version.
> + */
> +
> +#include <linux/stddef.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/errno.h>
> +#include <linux/reboot.h>
> +#include <linux/pci.h>
> +#include <linux/kdev_t.h>
> +#include <linux/major.h>
> +#include <linux/console.h>
> +#include <linux/delay.h>
> +#include <linux/seq_file.h>
> +#include <linux/root_dev.h>
> +#include <linux/initrd.h>
> +
> +#include <asm/system.h>
> +#include <asm/atomic.h>
> +#include <asm/time.h>
> +#include <asm/io.h>
> +#include <asm/machdep.h>
> +#include <asm/ipic.h>
> +#include <asm/bootinfo.h>
> +#include <asm/irq.h>
> +#include <asm/prom.h>
> +#include <asm/udbg.h>
> +#include <sysdev/fsl_soc.h>
> +#include <asm/qe.h>
> +#include <asm/qe_ic.h>
> +
> +#include "mpc83xx.h"
> +#include "mpc8360e_pb.h"
> +
> +#undef DEBUG
> +#ifdef DEBUG
> +#define DBG(fmt...) udbg_printf(fmt)
> +#else
> +#define DBG(fmt...)
> +#endif
> +
> +#ifndef CONFIG_PCI
> +unsigned long isa_io_base = 0;
> +unsigned long isa_mem_base = 0;
> +#endif
> +
> +static u8 *bcsr_regs = NULL;
> +
> +u8 *get_bcsr(void)
> +{
> + return bcsr_regs;
> +}
Is get_bcsr() needed since you removed its use from ucc_geth? (if
not, let's remove it and the header as well).
> +
> +/*
> **********************************************************************
> **
> + *
> + * Setup the architecture
> + *
> + */
> +static void __init mpc8360_sys_setup_arch(void)
> +{
> + struct device_node *np;
> +
> + if (ppc_md.progress)
> + ppc_md.progress("mpc8360_sys_setup_arch()", 0);
> +
> + np = of_find_node_by_type(NULL, "cpu");
> + if (np != 0) {
> + unsigned int *fp =
> + (int *)get_property(np, "clock-frequency", NULL);
> + if (fp != 0)
> + loops_per_jiffy = *fp / HZ;
> + else
> + loops_per_jiffy = 50000000 / HZ;
> + of_node_put(np);
> + }
> +
> + /* Map BCSR area */
> + np = of_find_node_by_name(NULL, "bcsr");
> + if (np != 0) {
> + struct resource res;
> +
> + of_address_to_resource(np, 0, &res);
> + bcsr_regs = ioremap(res.start, res.end - res.start +1);
> + of_node_put(np);
> + }
> +
> +#ifdef CONFIG_PCI
> + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
> + add_bridge(np);
> +
> + ppc_md.pci_swizzle = common_swizzle;
> + ppc_md.pci_exclude_device = mpc83xx_exclude_device;
> +#endif
> +
> +#ifdef CONFIG_QUICC_ENGINE
> + qe_reset();
> +
> + if ((np = of_find_node_by_name(np, "par_io")) != NULL) {
> + par_io_init(np);
> + of_node_put(np);
> +
> + for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
> + par_io_of_config(np);
> + }
> +
> + if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
> + != NULL){
> + /* Reset the Ethernet PHY */
> + bcsr_regs[9] &= ~0x20;
> + udelay(1000);
> + bcsr_regs[9] |= 0x20;
> + iounmap(bcsr_regs);
> + of_node_put(np);
> + }
> +
> +#endif /* CONFIG_QUICC_ENGINE */
> +
> +#ifdef CONFIG_BLK_DEV_INITRD
> + if (initrd_start)
> + ROOT_DEV = Root_RAM0;
> + else
> +#endif
> +#ifdef CONFIG_ROOT_NFS
> + ROOT_DEV = Root_NFS;
> +#else
> + ROOT_DEV = Root_HDA1;
> +#endif
> +}
> +
> +void __init mpc8360_sys_init_IRQ(void)
> +{
> +
> + struct device_node *np;
> +
> + np = of_find_node_by_type(NULL, "ipic");
> + if (!np)
> + return;
> +
> + ipic_init(np, 0);
> +
> + /* Initialize the default interrupt mapping priorities,
> + * in case the boot rom changed something on us.
> + */
> + ipic_set_default_priority();
> + of_node_put(np);
> +
> +#ifdef CONFIG_QUICC_ENGINE
> + np = of_find_node_by_type(NULL, "qeic");
> + if (!np)
> + return;
> +
> + qe_ic_init(np, 0);
> + of_node_put(np);
> +#endif /* CONFIG_QUICC_ENGINE */
> +}
> +
> +#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
> +extern ulong ds1374_get_rtc_time(void);
> +extern int ds1374_set_rtc_time(ulong);
> +
> +static int __init mpc8360_rtc_hookup(void)
> +{
> + struct timespec tv;
> +
> + ppc_md.get_rtc_time = ds1374_get_rtc_time;
> + ppc_md.set_rtc_time = ds1374_set_rtc_time;
> +
> + tv.tv_nsec = 0;
> + tv.tv_sec = (ppc_md.get_rtc_time) ();
> + do_settimeofday(&tv);
> +
> + return 0;
> +}
> +
> +late_initcall(mpc8360_rtc_hookup);
> +#endif
> +
> +/*
> + * Called very early, MMU is off, device-tree isn't unflattened
> + */
> +static int __init mpc8360_sys_probe(void)
> +{
> + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
> + "model", NULL);
> + if (model == NULL)
> + return 0;
> + if (strcmp(model, "MPC8360EPB"))
> + return 0;
> +
> + DBG("MPC8360EMDS-PB found\n");
> +
> + return 1;
> +}
> +
> +define_machine(mpc8360_sys) {
> + .name = "MPC8360E PB",
> + .probe = mpc8360_sys_probe,
> + .setup_arch = mpc8360_sys_setup_arch,
> + .init_IRQ = mpc8360_sys_init_IRQ,
> + .get_irq = ipic_get_irq,
> + .restart = mpc83xx_restart,
> + .time_init = mpc83xx_time_init,
> + .calibrate_decr = generic_calibrate_decr,
> + .progress = udbg_progress,
> +};
> diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.h b/arch/
> powerpc/platforms/83xx/mpc8360e_pb.h
> new file mode 100644
> index 0000000..02a05d9
> --- /dev/null
> +++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.h
> @@ -0,0 +1,25 @@
> +/*
> + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights
> reserved.
> + *
> + * Author: Li Yang <LeoLi at freescale.com>
> + * Yin Olivia <Hong-hua.Yin at freescale.com>
> + *
> + * Description:
> + * MPC8360E MDS PB board specific header.
> + *
> + * Changelog:
> + * Jun 21, 2006 Initial version
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms of the GNU General Public License as
> published by the
> + * Free Software Foundation; either version 2 of the License, or
> (at your
> + * option) any later version.
> + *
> + */
> +
> +#ifndef __MACH_MPC8360E_PB_H__
> +#define __MACH_MPC8360E_PB_H__
> +
> +extern u8 *get_bcsr(void);
> +
> +#endif /* __MACH_MPC8360E_PB_H__ */
> --
> 1.4.2.1
More information about the Linuxppc-dev
mailing list