[PATCH] set default video mode on PowerBook Wallstreet

[Olaf Hering]

finally add the third PowerBook Wallstreet 233MHz model to the list of
known display resolutions. 
Without this change, a 640x480 video mode is used.
A workaround so far was to boot with 'video=atyfb:vmode:14'

Signed-off-by: Olaf Hering <olaf at aepfle.de>

---
 drivers/video/aty/atyfb_base.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: linux-2.6.18/drivers/video/aty/atyfb_base.c
===================================================================
--- linux-2.6.18.orig/drivers/video/aty/atyfb_base.c
+++ linux-2.6.18/drivers/video/aty/atyfb_base.c
@@ -409,7 +409,7 @@ static struct {
 	{ PCI_CHIP_MACH64LB, "3D RAGE LT PRO (Mach64 LB, AGP)", 236, 75, 100, 135, ATI_CHIP_264LTPRO },
 	{ PCI_CHIP_MACH64LD, "3D RAGE LT PRO (Mach64 LD, AGP)", 230, 100, 100, 135, ATI_CHIP_264LTPRO },
 	{ PCI_CHIP_MACH64LI, "3D RAGE LT PRO (Mach64 LI, PCI)", 230, 100, 100, 135, ATI_CHIP_264LTPRO | M64F_G3_PB_1_1 | M64F_G3_PB_1024x768 },
-	{ PCI_CHIP_MACH64LP, "3D RAGE LT PRO (Mach64 LP, PCI)", 230, 100, 100, 135, ATI_CHIP_264LTPRO },
+	{ PCI_CHIP_MACH64LP, "3D RAGE LT PRO (Mach64 LP, PCI)", 230, 100, 100, 135, ATI_CHIP_264LTPRO | M64F_G3_PB_1024x768 },
 	{ PCI_CHIP_MACH64LQ, "3D RAGE LT PRO (Mach64 LQ, PCI)", 230, 100, 100, 135, ATI_CHIP_264LTPRO },
 
 	{ PCI_CHIP_MACH64GM, "3D RAGE XL (Mach64 GM, AGP 2x)", 230, 83, 63, 135, ATI_CHIP_264XL },