[PATCH 1/2] Add MPC52xx Interrupt controller support for ARCH=powerpc
Nicolas DET
nd at bplan-gmbh.de
Wed Nov 1 07:04:25 EST 2006
Nicolas DET wrote:
> Benjamin Herrenschmidt wrote:
>> On Tue, 2006-10-31 at 09:25 +0100, Nicolas DET wrote:
>>
>>> Ok. By the way, the mbar is include as property in our OpenFrimware.
>>> Moreover, the G2CORE CPU has a new SPR 'MBAR' which is the MBAR ;-).
>>> It would maybe make sense to create a new file
>>> (arch/powerpc/sysdev/mpc52xx.c) which would contain chip specific code.
>>>
>>> Like mpc52xx_get_mbar(), mpc52xx_get_ipbfreq(), etc...
>>>
>>> I updated a bit the patches. I applied Dale requests.
>>> My kernel still compiles and boots. ;-)
>>>
>>> Should I post the new patches?
>>
>> Sure.
>>
>
> Ok. Should be done this morning.
>
Here is is ;-).
As my mailer can insert a file, I copy paste. I hope it's still ok...
archpowerpc_efika.patch
-----------------------
--- a/arch/powerpc/platforms/efika/setup.c 1970-01-01 01:00:00.000000000
+0100
+++ b/arch/powerpc/platforms/efika/setup.c 2006-10-31 12:31:55.000000000
+0100
@@ -0,0 +1,153 @@
+/*
+ *
+ * Efika 5K2 platform setup
+ *
+ * Copyright (C) 2006 bplan GmbH
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/utsrelease.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/console.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+#include <linux/timer.h>
+
+#include <asm/pgtable.h>
+#include <asm/prom.h>
+#include <asm/dma.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/sections.h>
+#include <asm/time.h>
+#include <asm/rtas.h>
+#include <asm/mpc52xx.h>
+
+#include "efika.h"
+
+void rtas_indicator_progress(char *, unsigned short);
+
+extern unsigned long loops_per_jiffy;
+
+static void efika_show_cpuinfo(struct seq_file *m)
+{
+ struct device_node *root;
+ const char *revision = NULL;
+ const char *codegendescription = NULL;
+ const char *codegenvendor = NULL;
+
+ root = find_path_device("/");
+ if (root) {
+ revision = get_property(root, "revision", NULL);
+ codegendescription =
+ get_property(root, "CODEGEN,description", NULL);
+ codegenvendor = get_property(root, "CODEGEN,vendor", NULL);
+ }
+
+ if (codegendescription)
+ seq_printf(m, "machine\t\t: %s\n", codegendescription);
+ else
+ seq_printf(m, "machine\t\t: Efika\n");
+
+ if (revision)
+ seq_printf(m, "revision\t: %s\n", revision);
+
+ if (codegenvendor)
+ seq_printf(m, "vendor\t\t: %s\n", codegenvendor);
+}
+
+static void __init efika_setup_arch(void)
+{
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000 / HZ;
+
+ rtas_initialize();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ initrd_below_start_ok = 1;
+
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+ ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */
+
+ pci_create_OF_bus_map();
+
+ efika_pcisetup();
+
+ if (ppc_md.progress)
+ ppc_md.progress("Linux/PPC " UTS_RELEASE " runnung on Efika ;-)\n", 0x0);
+}
+
+static void __init efika_init_IRQ(void)
+{
+ of_irq_map_init(0);
+ mpc52xx_init_irq();
+}
+
+static void __init efika_init(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress(" Have fun with your Efika! ", 0x7777);
+}
+
+static int __init efika_probe(void)
+{
+ char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
+ "model", NULL);
+
+ if (model == NULL)
+ return 0;
+ if (strcmp(model, "EFIKA5K2"))
+ return 0;
+
+ ISA_DMA_THRESHOLD = ~0L;
+ DMA_MODE_READ = 0x44;
+ DMA_MODE_WRITE = 0x48;
+
+ /*
+ * Others values (isa_mem_base, pci_dram_base) are 0
+ * in CHRP for us. Only isa_io_base is changed.
+ */
+ isa_io_base = CHRP_ISA_IO_BASE;
+
+ return 1;
+}
+
+define_machine(efika)
+{
+ .name = EFIKA_PLATFORM_NAME,
+ .probe = efika_probe,
+ .setup_arch = efika_setup_arch,
+ .init = efika_init,
+ .show_cpuinfo = efika_show_cpuinfo,
+ .init_IRQ = efika_init_IRQ,
+ .get_irq = mpc52xx_get_irq,
+ .restart = rtas_restart,
+ .power_off = rtas_power_off,
+ .halt = rtas_halt,
+ .set_rtc_time = rtas_set_rtc_time,
+ .get_rtc_time = rtas_get_rtc_time,
+ .progress = rtas_progress,
+ .get_boot_time = rtas_get_boot_time,
+ .calibrate_decr = generic_calibrate_decr,
+ .phys_mem_access_prot = pci_phys_mem_access_prot,
+ .pcibios_fixup = efika_pciirq_map,
+};
--- a/arch/powerpc/platforms/efika/pci.c 1970-01-01 01:00:00.000000000 +0100
+++ b/arch/powerpc/platforms/efika/pci.c 2006-10-31 12:31:55.000000000 +0100
@@ -0,0 +1,150 @@
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/hydra.h>
+#include <asm/prom.h>
+#include <asm/gg2.h>
+#include <asm/machdep.h>
+#include <asm/sections.h>
+#include <asm/pci-bridge.h>
+#include <asm/grackle.h>
+#include <asm/rtas.h>
+
+#include "efika.h"
+
+static struct device_node *efika_pcictrl;
+
+/*
+ * Access functions for PCI config space using RTAS calls.
+ */
+static int rtas_read_config(struct pci_bus *bus, unsigned int devfn,
int offset,
+ int len, u32 * val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
+ | (((bus->number - hose->first_busno) & 0xff) << 16)
+ | (hose->index << 24);
+ int ret = -1;
+ int rval;
+
+ rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len);
+ *val = ret;
+ return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static int rtas_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
+ | (((bus->number - hose->first_busno) & 0xff) << 16)
+ | (hose->index << 24);
+ int rval;
+
+ rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL,
+ addr, len, val);
+ return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops rtas_pci_ops = {
+ rtas_read_config,
+ rtas_write_config
+};
+
+void __init efika_pcisetup(void)
+{
+ const int *bus_range;
+ int len;
+ struct pci_controller *hose;
+ struct device_node *root;
+ struct device_node *pcictrl;
+
+ root = of_find_node_by_path("/");
+ if (root == NULL) {
+ printk(KERN_WARNING EFIKA_PLATFORM_NAME
+ ": Unable to find the root node\n");
+ return;
+ }
+
+ for (pcictrl = NULL;;) {
+ pcictrl = of_get_next_child(root, pcictrl);
+ if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0))
+ break;
+ }
+
+ if (pcictrl == NULL) {
+ printk(KERN_WARNING EFIKA_PLATFORM_NAME
+ ": Unable to find the PCI bridge node\n");
+ return;
+ }
+
+ efika_pcictrl = pcictrl;
+
+ bus_range = get_property(pcictrl, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING EFIKA_PLATFORM_NAME
+ ": Can't get bus-range for %s\n", pcictrl->full_name);
+ return;
+ }
+ if (bus_range[1] == bus_range[0])
+ printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d",
+ bus_range[0]);
+ else
+ printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d",
+ bus_range[0], bus_range[1]);
+ printk(" controlled by %s", pcictrl->full_name);
+ printk("\n");
+
+ hose = pcibios_alloc_controller();
+ if (!hose) {
+ printk(KERN_WARNING EFIKA_PLATFORM_NAME
+ ": Can't allocate PCI controller structure for %s\n",
+ pcictrl->full_name);
+ return;
+ }
+
+ hose->arch_data = pcictrl;
+ hose->first_busno = bus_range[0];
+ hose->last_busno = bus_range[1];
+ hose->ops = &rtas_pci_ops;
+
+ pci_process_bridge_OF_ranges(hose, pcictrl, 0);
+}
+
+void __init efika_pciirq_map(void)
+{
+ struct device_node *pcictrl = efika_pcictrl;
+ struct pci_dev *pdev = NULL;
+ struct device_node *ofwdev;
+
+ if (pcictrl == NULL)
+ return;
+
+ /*
+ * We need to find PCI irq, create a virtual mapping, and set
+ * the irq number into the PCI structure (software/Linux side)
+ * I could to this by walking into the /pci node, do
+ * of_irq_map_pci(), irq_create_of_mapping(), then find
+ * the good 'struct pci_dev *' and update pci_dev->irq.
+ * However, pci_read_irq_line() should do everything correctly!
+ */
+
+ for_each_pci_dev(pdev)
+ {
+ if (pci_read_irq_line(pdev) < 0)
+ continue;
+
+ ofwdev = pci_device_to_OF_node(pdev);
+ if (ofwdev)
+ printk(KERN_INFO EFIKA_PLATFORM_NAME ": got IRQ 0x%x for '%s'\n",
pdev->irq, ofwdev->full_name);
+ }
+
+}
--- a/arch/powerpc/platforms/efika/efika.h 1970-01-01 01:00:00.000000000
+0100
+++ b/arch/powerpc/platforms/efika/efika.h 2006-10-31 12:31:55.000000000
+0100
@@ -0,0 +1,20 @@
+/*
+ * Efika 5K2 platform setup - Header file
+ *
+ * Copyright (C) 2006 bplan GmbH
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#ifndef __ARCH_POWERPC_EFIKA__
+#define __ARCH_POWERPC_EFIKA__
+
+#define EFIKA_PLATFORM_NAME "Efika"
+
+void __init efika_pcisetup(void);
+void __init efika_pciirq_map(void);
+
+#endif
--- a/arch/powerpc/platforms/efika/Makefile 1970-01-01
01:00:00.000000000 +0100
+++ b/arch/powerpc/platforms/efika/Makefile 2006-10-31
20:03:05.000000000 +0100
@@ -0,0 +1 @@
+obj-y += setup.o pci.o
--- a/arch/powerpc/platforms/Makefile 2006-10-31 20:28:06.000000000 +0100
+++ b/arch/powerpc/platforms/Makefile 2006-10-31 12:31:55.000000000 +0100
@@ -6,6 +6,7 @@ obj-$(CONFIG_PPC_PMAC) += powermac/
endif
endif
obj-$(CONFIG_PPC_CHRP) += chrp/
+obj-$(CONFIG_PPC_EFIKA) += efika/
obj-$(CONFIG_4xx) += 4xx/
obj-$(CONFIG_PPC_83xx) += 83xx/
obj-$(CONFIG_PPC_85xx) += 85xx/
--- a/arch/powerpc/boot/Makefile 2006-10-25 19:07:23.000000000 +0200
+++ b/arch/powerpc/boot/Makefile 2006-10-31 12:31:55.000000000 +0100
@@ -155,6 +155,7 @@ image-$(CONFIG_PPC_PSERIES) += zImage.p
image-$(CONFIG_PPC_MAPLE) += zImage.pseries
image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries
image-$(CONFIG_PPC_CHRP) += zImage.chrp
+image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
--- a/arch/powerpc/Kconfig 2006-10-31 20:28:06.000000000 +0100
+++ b/arch/powerpc/Kconfig 2006-10-31 19:57:57.000000000 +0100
@@ -386,6 +386,19 @@ config PPC_CHRP
select PPC_UDBG_16550
default y
+config PPC_MPC52xx_PIC
+ bool
+ default y
+
+config PPC_EFIKA
+ bool "bPlan Efika 5k2. MPC5200B based computer"
+ depends on PPC_MULTIPLATFORM && PPC32
+ select PPC_RTAS
+ select RTAS_PROC
+ select PPC_MPC52xx
+ select PPC_MPC52xx_PIC
+ default y
+
config PPC_PMAC
bool "Apple PowerMac based machines"
depends on PPC_MULTIPLATFORM
archpowerpc_mpc52xx.patch
-------------------------
--- a/arch/powerpc/sysdev/mpc52xx_pic.c 1970-01-01 01:00:00.000000000 +0100
+++ b/arch/powerpc/sysdev/mpc52xx_pic.c 2006-10-31 19:56:22.000000000 +0100
@@ -0,0 +1,511 @@
+/*
+ *
+ * Programmable Interrupt Controller functions for the Freescale MPC52xx.
+ *
+ * Copyright (C) 2006 bplan GmbH
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/stddef.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/hardirq.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/mpc52xx.h>
+
+static struct mpc52xx_intr __iomem *intr;
+static struct mpc52xx_sdma __iomem *sdma;
+static struct irq_host *mpc52xx_irqhost = NULL;
+
+static unsigned char mpc52xx_map_senses[4] = {
+ IRQ_TYPE_LEVEL_HIGH,
+ IRQ_TYPE_EDGE_FALLING,
+ IRQ_TYPE_EDGE_RISING,
+ IRQ_TYPE_LEVEL_LOW,
+};
+
+/*
+ *
+*/
+
+static inline void io_be_setbit(u32 __iomem *addr, int bitno)
+{
+ out_be32(addr, in_be32(addr) | (1 << bitno) );
+}
+
+static inline void io_be_clrbit(u32 __iomem *addr, int bitno)
+{
+ out_be32(addr, in_be32(addr) & ~(1 << bitno));
+}
+
+/*
+ * Critial interrupt irq_chip
+*/
+static void mpc52xx_crit_mask(unsigned int virq)
+{
+ int irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x, l2=%d\n", __func__, irq, l2irq);
+
+ BUG_ON(l2irq != 0);
+
+ io_be_clrbit(&intr->ctrl, 11);
+}
+
+static void mpc52xx_crit_unmask(unsigned int virq)
+{
+ int irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
+
+ BUG_ON(l2irq != 0);
+
+ io_be_setbit(&intr->ctrl, 11);
+}
+
+static void mpc52xx_crit_ack(unsigned int virq)
+{
+ int irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
+
+ BUG_ON(l2irq != 0);
+
+ io_be_setbit(&intr->ctrl, 27);
+}
+
+static struct irq_chip mpc52xx_crit_irqchip = {
+ .typename = "MPC52xx IRQ0",
+ .mask = mpc52xx_crit_mask,
+ .unmask = mpc52xx_crit_unmask,
+ .ack = mpc52xx_crit_ack,
+};
+
+/*
+ * IRQ[1-3] interrupt irq_chip
+*/
+
+static void mpc52xx_mainirq_mask(unsigned int virq)
+{
+ int irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
+
+ io_be_clrbit(&intr->ctrl, 11 - l2irq);
+}
+
+static void mpc52xx_mainirq_unmask(unsigned int virq)
+{
+ int irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
+
+ io_be_setbit(&intr->ctrl, 11 - l2irq);
+}
+
+static void mpc52xx_mainirq_ack(unsigned int virq)
+{
+ int irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
+
+ io_be_setbit(&intr->ctrl, 27-l2irq);
+}
+
+static struct irq_chip mpc52xx_mainirq_irqchip = {
+ .typename = " MPC52xx IRQ[1-3] ",
+ .mask = mpc52xx_mainirq_mask,
+ .unmask = mpc52xx_mainirq_unmask,
+ .ack = mpc52xx_mainirq_ack,
+};
+
+/*
+ * Main interrupt irq_chip
+*/
+
+static void mpc52xx_main_mask(unsigned int virq)
+{
+ int irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
+
+ io_be_setbit(&intr->main_mask, 15 - l2irq);
+}
+
+static void mpc52xx_main_unmask(unsigned int virq)
+{
+ int irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
+
+ io_be_clrbit(&intr->main_mask, 15 - l2irq);
+}
+
+static struct irq_chip mpc52xx_main_irqchip = {
+ .typename = "MPC52xx Main",
+ .mask = mpc52xx_main_mask,
+ .mask_ack = mpc52xx_main_mask,
+ .unmask = mpc52xx_main_unmask,
+};
+
+/*
+ * Peripherals interrupt irq_chip
+*/
+
+static void mpc52xx_periph_mask(unsigned int virq)
+{
+ int irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
+
+ io_be_setbit(&intr->per_mask, 31 - l2irq);
+}
+
+static void mpc52xx_periph_unmask(unsigned int virq)
+{
+ int irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
+
+ io_be_clrbit(&intr->per_mask, 31 - l2irq);
+}
+
+static struct irq_chip mpc52xx_periph_irqchip = {
+ .typename = "MPC52xx Peripherals",
+ .mask = mpc52xx_periph_mask,
+ .mask_ack = mpc52xx_periph_mask,
+ .unmask = mpc52xx_periph_unmask,
+};
+
+/*
+ * SDMA interrupt irq_chip
+*/
+
+static void mpc52xx_sdma_mask(unsigned int virq)
+{
+ int irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
+
+ io_be_setbit(&sdma->IntMask, l2irq);
+}
+
+static void mpc52xx_sdma_unmask(unsigned int virq)
+{
+ int irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
+
+ io_be_clrbit(&sdma->IntMask, l2irq);
+}
+
+static void mpc52xx_sdma_ack(unsigned int virq)
+{
+ int irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
+
+ out_be32(&sdma->IntPend, 1 << l2irq);
+}
+
+static struct irq_chip mpc52xx_sdma_irqchip = {
+ .typename = "MPC52xx SDMA",
+ .mask = mpc52xx_sdma_mask,
+ .unmask = mpc52xx_sdma_unmask,
+ .ack = mpc52xx_sdma_ack,
+};
+
+/*
+ * irq_host
+*/
+
+static int mpc52xx_irqhost_match(struct irq_host *h, struct device_node
*node)
+{
+ pr_debug("%s: %p vs %p\n", __func__, find_mpc52xx_picnode(), node);
+ return mpc52xx_irqhost->host_data == node;
+}
+
+static int mpc52xx_irqhost_xlate(struct irq_host *h, struct device_node
*ct,
+ u32 * intspec, unsigned int intsize,
+ irq_hw_number_t * out_hwirq,
+ unsigned int *out_flags)
+{
+ int intrvect_l1;
+ int intrvect_l2;
+ int intrvect_type;
+ int intrvect_linux;
+
+ if (intsize != 3)
+ return -1;
+
+ intrvect_l1 = (int)intspec[0];
+ intrvect_l2 = (int)intspec[1];
+ intrvect_type = (int)intspec[2];
+
+ intrvect_linux =
+ (intrvect_l1 << MPC52xx_IRQ_L1_OFFSET) & MPC52xx_IRQ_L1_MASK;
+ intrvect_linux |=
+ (intrvect_l2 << MPC52xx_IRQ_L2_OFFSET) & MPC52xx_IRQ_L2_MASK;
+
+ pr_debug("return %x, l1=%d, l2=%d\n", intrvect_linux, intrvect_l1,
+ intrvect_l2);
+
+ *out_hwirq = intrvect_linux;
+ *out_flags = mpc52xx_map_senses[intrvect_type];
+
+ return 0;
+}
+
+/*
+ * this function retrieves the correct IRQ type out
+ * of the MPC regs
+ * Only externals IRQs needs this
+*/
+static int mpc52xx_irqx_gettype(int irq)
+{
+ int type;
+ u32 ctrl_reg;
+
+ ctrl_reg = in_be32(&intr->ctrl);
+ type = (ctrl_reg >> (22 - irq * 2)) & 0x3;
+
+ return mpc52xx_map_senses[type];
+}
+
+static int mpc52xx_irqhost_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t irq)
+{
+ int l1irq;
+ int l2irq;
+ struct irq_chip *good_irqchip;
+ void *good_handle;
+ int type;
+
+ l1irq = (irq & MPC52xx_IRQ_L1_MASK) >> MPC52xx_IRQ_L1_OFFSET;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ /*
+ * Most of ours IRQs will be level low
+ * Only external IRQs on some platform may be others
+ */
+ type = IRQ_TYPE_LEVEL_LOW;
+
+ switch (l1irq) {
+ case MPC52xx_IRQ_L1_CRIT:
+ pr_debug("%s: Critical. l2=%x\n", __func__, l2irq);
+
+ BUG_ON(l2irq != 0);
+
+ type = mpc52xx_irqx_gettype(l2irq);
+ good_irqchip = &mpc52xx_crit_irqchip;
+ break;
+
+ case MPC52xx_IRQ_L1_MAIN:
+ pr_debug("%s: Main IRQ[1-3] l2=%x\n", __func__, l2irq);
+
+ if ((l2irq >= 0) && (l2irq <= 3)) {
+ type = mpc52xx_irqx_gettype(l2irq);
+ good_irqchip = &mpc52xx_mainirq_irqchip;
+ } else {
+ good_irqchip = &mpc52xx_main_irqchip;
+ }
+ break;
+
+ case MPC52xx_IRQ_L1_PERP:
+ pr_debug("%s: Peripherals. l2=%x\n", __func__, l2irq);
+ good_irqchip = &mpc52xx_periph_irqchip;
+ break;
+
+ case MPC52xx_IRQ_L1_SDMA:
+ pr_debug("%s: SDMA. l2=%x\n", __func__, l2irq);
+ good_irqchip = &mpc52xx_sdma_irqchip;
+ break;
+
+ default:
+ pr_debug("%s: Error, unknown L1 IRQ (0x%x)\n", __func__, l1irq);
+ printk(KERN_ERR "Unknow IRQ!\n");
+ return -EINVAL;
+ }
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_FALLING:
+ case IRQ_TYPE_EDGE_RISING:
+ good_handle = handle_edge_irq;
+ break;
+ default:
+ good_handle = handle_level_irq;
+ }
+
+ set_irq_chip_and_handler(virq, good_irqchip, good_handle);
+
+ pr_debug("%s: virq=%x, hw=%x. type=%x\n", __func__, virq,
+ (int)irq, type);
+
+ return 0;
+}
+
+static struct irq_host_ops mpc52xx_irqhost_ops = {
+ .match = mpc52xx_irqhost_match,
+ .xlate = mpc52xx_irqhost_xlate,
+ .map = mpc52xx_irqhost_map,
+};
+
+/*
+ * init (public)
+*/
+
+void __init mpc52xx_init_irq(void)
+{
+ u32 intr_ctrl;
+
+ /* Remap the necessary zones */
+ intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
+ sdma = ioremap(MPC52xx_PA(MPC52xx_SDMA_OFFSET), MPC52xx_SDMA_SIZE);
+
+ if ((intr == NULL) || (sdma == NULL))
+ panic("Can't ioremap PIC/SDMA register or init_irq !");
+
+ /* Disable all interrupt sources. */
+ out_be32(&sdma->IntPend, 0xffffffff); /* 1 means clear pending */
+ out_be32(&sdma->IntMask, 0xffffffff); /* 1 means disabled */
+ out_be32(&intr->per_mask, 0x7ffffc00); /* 1 means disabled */
+ out_be32(&intr->main_mask, 0x00010fff); /* 1 means disabled */
+ intr_ctrl = in_be32(&intr->ctrl);
+ intr_ctrl &= 0x00ff0000; /* Keeps IRQ[0-3] config */
+ intr_ctrl |= 0x0f000000 | /* clear IRQ 0-3 */
+ 0x00001000 | /* MEE master external enable */
+ 0x00000000 | /* 0 means disable IRQ 0-3 */
+ 0x00000001; /* CEb route critical normally */
+ out_be32(&intr->ctrl, intr_ctrl);
+
+ /* Zero a bunch of the priority settings. */
+ out_be32(&intr->per_pri1, 0);
+ out_be32(&intr->per_pri2, 0);
+ out_be32(&intr->per_pri3, 0);
+ out_be32(&intr->main_pri1, 0);
+ out_be32(&intr->main_pri2, 0);
+
+ /*
+ * As last step, add an irq host to translate the real
+ * hw irq information provided by the ofw to linux virq
+ */
+
+ mpc52xx_irqhost =
+ irq_alloc_host(IRQ_HOST_MAP_LINEAR, 0xd0,
+ &mpc52xx_irqhost_ops, -1);
+
+ if (mpc52xx_irqhost)
+ mpc52xx_irqhost->host_data = (void *)find_mpc52xx_picnode();
+}
+
+/*
+ * get_irq (public)
+*/
+unsigned int mpc52xx_get_irq(void)
+{
+ u32 status;
+ int irq = NO_IRQ_IGNORE;
+
+ status = in_be32(&intr->enc_status);
+ if (status & 0x00000400) { /* critical */
+ irq = (status >> 8) & 0x3;
+ if (irq == 2) /* high priority peripheral */
+ goto peripheral;
+ irq |=
+ (MPC52xx_IRQ_L1_CRIT << MPC52xx_IRQ_L1_OFFSET) &
+ MPC52xx_IRQ_L1_MASK;
+ } else if (status & 0x00200000) { /* main */
+ irq = (status >> 16) & 0x1f;
+ if (irq == 4) /* low priority peripheral */
+ goto peripheral;
+ irq |=
+ (MPC52xx_IRQ_L1_MAIN << MPC52xx_IRQ_L1_OFFSET) &
+ MPC52xx_IRQ_L1_MASK;
+ } else if (status & 0x20000000) { /* peripheral */
+ peripheral:
+ irq = (status >> 24) & 0x1f;
+ if (irq == 0) { /* bestcomm */
+ status = in_be32(&sdma->IntPend);
+ irq = ffs(status) - 1;
+ irq |=
+ (MPC52xx_IRQ_L1_SDMA << MPC52xx_IRQ_L1_OFFSET) &
+ MPC52xx_IRQ_L1_MASK;
+ } else
+ irq |=
+ (MPC52xx_IRQ_L1_PERP << MPC52xx_IRQ_L1_OFFSET) &
+ MPC52xx_IRQ_L1_MASK;
+
+ }
+
+ pr_debug("%s: irq=%x. virq=%d\n", __func__, irq,
+ irq_linear_revmap(mpc52xx_irqhost, irq));
+
+ return irq_linear_revmap(mpc52xx_irqhost, irq);
+}
--- a/arch/powerpc/sysdev/Makefile 2006-10-25 19:07:24.000000000 +0200
+++ b/arch/powerpc/sysdev/Makefile 2006-10-31 19:56:41.000000000 +0100
@@ -13,6 +13,7 @@ obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_PPC_TODC) += todc.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
+obj-$(CONFIG_PPC_MPC52xx_PIC) += mpc52xx_pic.o
ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_I8259) += i8259.o
--- a/include/asm-powerpc/mpc52xx.h 1970-01-01 01:00:00.000000000 +0100
+++ b/include/asm-powerpc/mpc52xx.h 2006-10-31 12:31:55.000000000 +0100
@@ -0,0 +1,373 @@
+/*
+ *
+ * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips
+ * May need to be cleaned as the port goes on ...
+ *
+ * Copyright (C) 2004-2005 Sylvain Munaut <tnt at 246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_POWERPC_MPC52xx_H__
+#define __ASM_POWERPC_MPC52xx_H__
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+#include <asm/prom.h>
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_PCI
+#define _IO_BASE isa_io_base
+#define _ISA_MEM_BASE isa_mem_base
+#define PCI_DRAM_OFFSET pci_dram_offset
+#else
+#define _IO_BASE 0
+#define _ISA_MEM_BASE 0
+#define PCI_DRAM_OFFSET 0
+#endif
+
+/*
======================================================================== */
+/* Main registers/struct addresses
*/
+/*
======================================================================== */
+
+/* MBAR position */
+#define MPC52xx_MBAR 0xf0000000 /* Phys address */
+#define MPC52xx_MBAR_VIRT 0xf0000000 /* Virt address */
+#define MPC52xx_MBAR_SIZE 0x00010000
+
+#define MPC52xx_PA(x) ((phys_addr_t)(MPC52xx_MBAR + (x)))
+#define MPC52xx_VA(x) ((void __iomem *)(MPC52xx_MBAR_VIRT + (x)))
+
+/* Registers zone offset/size */
+#define MPC52xx_MMAP_CTL_OFFSET 0x0000
+#define MPC52xx_MMAP_CTL_SIZE 0x068
+#define MPC52xx_SDRAM_OFFSET 0x0100
+#define MPC52xx_SDRAM_SIZE 0x010
+#define MPC52xx_CDM_OFFSET 0x0200
+#define MPC52xx_CDM_SIZE 0x038
+#define MPC52xx_INTR_OFFSET 0x0500
+#define MPC52xx_INTR_SIZE 0x04c
+#define MPC52xx_GPTx_OFFSET(x) (0x0600 + ((x)<<4))
+#define MPC52xx_GPT_SIZE 0x010
+#define MPC52xx_RTC_OFFSET 0x0800
+#define MPC52xx_RTC_SIZE 0x024
+#define MPC52xx_GPIO_OFFSET 0x0b00
+#define MPC52xx_GPIO_SIZE 0x040
+#define MPC52xx_GPIO_WKUP_OFFSET 0x0c00
+#define MPC52xx_GPIO_WKUP_SIZE 0x028
+#define MPC52xx_PCI_OFFSET 0x0d00
+#define MPC52xx_PCI_SIZE 0x100
+#define MPC52xx_SDMA_OFFSET 0x1200
+#define MPC52xx_SDMA_SIZE 0x100
+#define MPC52xx_XLB_OFFSET 0x1f00
+#define MPC52xx_XLB_SIZE 0x100
+#define MPC52xx_PSCx_OFFSET(x) (((x)!=6)?(0x1e00+((x)<<9)):0x2c00)
+#define MPC52xx_PSC_SIZE 0x0a0
+
+/* SRAM used for SDMA */
+#define MPC52xx_SRAM_OFFSET 0x8000
+#define MPC52xx_SRAM_SIZE 0x4000
+
+/*
======================================================================== */
+/* IRQ mapping
*/
+/*
======================================================================== */
+
+#define MPC52xx_IRQ_L1_CRIT (0)
+#define MPC52xx_IRQ_L1_MAIN (1)
+#define MPC52xx_IRQ_L1_PERP (2)
+#define MPC52xx_IRQ_L1_SDMA (3)
+
+#define MPC52xx_IRQ_L1_OFFSET (6)
+#define MPC52xx_IRQ_L1_MASK (0x00c0)
+
+#define MPC52xx_IRQ_L2_OFFSET (0)
+#define MPC52xx_IRQ_L2_MASK (0x003f)
+
+/*
+ * 24 peripherals ints
+ * + 16 mains ints
+ * + 4 crit
+ * + 16 bestcomm task
+ * = 64
+*/
+#define MPC52xx_IRQ_MAXCOUNT (64)
+
+/*
======================================================================== */
+/* Structures mapping of some unit register set
*/
+/*
======================================================================== */
+
+#ifndef __ASSEMBLY__
+
+/* Memory Mapping Control */
+struct mpc52xx_mmap_ctl {
+ u32 mbar; /* MMAP_CTRL + 0x00 */
+
+ u32 cs0_start; /* MMAP_CTRL + 0x04 */
+ u32 cs0_stop; /* MMAP_CTRL + 0x08 */
+ u32 cs1_start; /* MMAP_CTRL + 0x0c */
+ u32 cs1_stop; /* MMAP_CTRL + 0x10 */
+ u32 cs2_start; /* MMAP_CTRL + 0x14 */
+ u32 cs2_stop; /* MMAP_CTRL + 0x18 */
+ u32 cs3_start; /* MMAP_CTRL + 0x1c */
+ u32 cs3_stop; /* MMAP_CTRL + 0x20 */
+ u32 cs4_start; /* MMAP_CTRL + 0x24 */
+ u32 cs4_stop; /* MMAP_CTRL + 0x28 */
+ u32 cs5_start; /* MMAP_CTRL + 0x2c */
+ u32 cs5_stop; /* MMAP_CTRL + 0x30 */
+
+ u32 sdram0; /* MMAP_CTRL + 0x34 */
+ u32 sdram1; /* MMAP_CTRL + 0X38 */
+
+ u32 reserved[4]; /* MMAP_CTRL + 0x3c .. 0x48 */
+
+ u32 boot_start; /* MMAP_CTRL + 0x4c */
+ u32 boot_stop; /* MMAP_CTRL + 0x50 */
+
+ u32 ipbi_ws_ctrl; /* MMAP_CTRL + 0x54 */
+
+ u32 cs6_start; /* MMAP_CTRL + 0x58 */
+ u32 cs6_stop; /* MMAP_CTRL + 0x5c */
+ u32 cs7_start; /* MMAP_CTRL + 0x60 */
+ u32 cs7_stop; /* MMAP_CTRL + 0x64 */
+};
+
+/* SDRAM control */
+struct mpc52xx_sdram {
+ u32 mode; /* SDRAM + 0x00 */
+ u32 ctrl; /* SDRAM + 0x04 */
+ u32 config1; /* SDRAM + 0x08 */
+ u32 config2; /* SDRAM + 0x0c */
+};
+
+/* Interrupt controller */
+struct mpc52xx_intr {
+ u32 per_mask; /* INTR + 0x00 */
+ u32 per_pri1; /* INTR + 0x04 */
+ u32 per_pri2; /* INTR + 0x08 */
+ u32 per_pri3; /* INTR + 0x0c */
+ u32 ctrl; /* INTR + 0x10 */
+ u32 main_mask; /* INTR + 0x14 */
+ u32 main_pri1; /* INTR + 0x18 */
+ u32 main_pri2; /* INTR + 0x1c */
+ u32 reserved1; /* INTR + 0x20 */
+ u32 enc_status; /* INTR + 0x24 */
+ u32 crit_status; /* INTR + 0x28 */
+ u32 main_status; /* INTR + 0x2c */
+ u32 per_status; /* INTR + 0x30 */
+ u32 reserved2; /* INTR + 0x34 */
+ u32 per_error; /* INTR + 0x38 */
+};
+
+/* SDMA */
+struct mpc52xx_sdma {
+ u32 taskBar; /* SDMA + 0x00 */
+ u32 currentPointer; /* SDMA + 0x04 */
+ u32 endPointer; /* SDMA + 0x08 */
+ u32 variablePointer; /* SDMA + 0x0c */
+
+ u8 IntVect1; /* SDMA + 0x10 */
+ u8 IntVect2; /* SDMA + 0x11 */
+ u16 PtdCntrl; /* SDMA + 0x12 */
+
+ u32 IntPend; /* SDMA + 0x14 */
+ u32 IntMask; /* SDMA + 0x18 */
+
+ u16 tcr[16]; /* SDMA + 0x1c .. 0x3a */
+
+ u8 ipr[32]; /* SDMA + 0x3c .. 0x5b */
+
+ u32 cReqSelect; /* SDMA + 0x5c */
+ u32 task_size0; /* SDMA + 0x60 */
+ u32 task_size1; /* SDMA + 0x64 */
+ u32 MDEDebug; /* SDMA + 0x68 */
+ u32 ADSDebug; /* SDMA + 0x6c */
+ u32 Value1; /* SDMA + 0x70 */
+ u32 Value2; /* SDMA + 0x74 */
+ u32 Control; /* SDMA + 0x78 */
+ u32 Status; /* SDMA + 0x7c */
+ u32 PTDDebug; /* SDMA + 0x80 */
+};
+
+/* GPT */
+struct mpc52xx_gpt {
+ u32 mode; /* GPTx + 0x00 */
+ u32 count; /* GPTx + 0x04 */
+ u32 pwm; /* GPTx + 0x08 */
+ u32 status; /* GPTx + 0X0c */
+};
+
+/* RTC */
+struct mpc52xx_rtc {
+ u32 time_set; /* RTC + 0x00 */
+ u32 date_set; /* RTC + 0x04 */
+ u32 stopwatch; /* RTC + 0x08 */
+ u32 int_enable; /* RTC + 0x0c */
+ u32 time; /* RTC + 0x10 */
+ u32 date; /* RTC + 0x14 */
+ u32 stopwatch_intr; /* RTC + 0x18 */
+ u32 bus_error; /* RTC + 0x1c */
+ u32 dividers; /* RTC + 0x20 */
+};
+
+/* GPIO */
+struct mpc52xx_gpio {
+ u32 port_config; /* GPIO + 0x00 */
+ u32 simple_gpioe; /* GPIO + 0x04 */
+ u32 simple_ode; /* GPIO + 0x08 */
+ u32 simple_ddr; /* GPIO + 0x0c */
+ u32 simple_dvo; /* GPIO + 0x10 */
+ u32 simple_ival; /* GPIO + 0x14 */
+ u8 outo_gpioe; /* GPIO + 0x18 */
+ u8 reserved1[3]; /* GPIO + 0x19 */
+ u8 outo_dvo; /* GPIO + 0x1c */
+ u8 reserved2[3]; /* GPIO + 0x1d */
+ u8 sint_gpioe; /* GPIO + 0x20 */
+ u8 reserved3[3]; /* GPIO + 0x21 */
+ u8 sint_ode; /* GPIO + 0x24 */
+ u8 reserved4[3]; /* GPIO + 0x25 */
+ u8 sint_ddr; /* GPIO + 0x28 */
+ u8 reserved5[3]; /* GPIO + 0x29 */
+ u8 sint_dvo; /* GPIO + 0x2c */
+ u8 reserved6[3]; /* GPIO + 0x2d */
+ u8 sint_inten; /* GPIO + 0x30 */
+ u8 reserved7[3]; /* GPIO + 0x31 */
+ u16 sint_itype; /* GPIO + 0x34 */
+ u16 reserved8; /* GPIO + 0x36 */
+ u8 gpio_control; /* GPIO + 0x38 */
+ u8 reserved9[3]; /* GPIO + 0x39 */
+ u8 sint_istat; /* GPIO + 0x3c */
+ u8 sint_ival; /* GPIO + 0x3d */
+ u8 bus_errs; /* GPIO + 0x3e */
+ u8 reserved10; /* GPIO + 0x3f */
+};
+
+#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD 4
+#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD 5
+#define MPC52xx_GPIO_PCI_DIS (1<<15)
+
+/* GPIO with WakeUp*/
+struct mpc52xx_gpio_wkup {
+ u8 wkup_gpioe; /* GPIO_WKUP + 0x00 */
+ u8 reserved1[3]; /* GPIO_WKUP + 0x03 */
+ u8 wkup_ode; /* GPIO_WKUP + 0x04 */
+ u8 reserved2[3]; /* GPIO_WKUP + 0x05 */
+ u8 wkup_ddr; /* GPIO_WKUP + 0x08 */
+ u8 reserved3[3]; /* GPIO_WKUP + 0x09 */
+ u8 wkup_dvo; /* GPIO_WKUP + 0x0C */
+ u8 reserved4[3]; /* GPIO_WKUP + 0x0D */
+ u8 wkup_inten; /* GPIO_WKUP + 0x10 */
+ u8 reserved5[3]; /* GPIO_WKUP + 0x11 */
+ u8 wkup_iinten; /* GPIO_WKUP + 0x14 */
+ u8 reserved6[3]; /* GPIO_WKUP + 0x15 */
+ u16 wkup_itype; /* GPIO_WKUP + 0x18 */
+ u8 reserved7[2]; /* GPIO_WKUP + 0x1A */
+ u8 wkup_maste; /* GPIO_WKUP + 0x1C */
+ u8 reserved8[3]; /* GPIO_WKUP + 0x1D */
+ u8 wkup_ival; /* GPIO_WKUP + 0x20 */
+ u8 reserved9[3]; /* GPIO_WKUP + 0x21 */
+ u8 wkup_istat; /* GPIO_WKUP + 0x24 */
+ u8 reserved10[3]; /* GPIO_WKUP + 0x25 */
+};
+
+/* XLB Bus control */
+struct mpc52xx_xlb {
+ u8 reserved[0x40];
+ u32 config; /* XLB + 0x40 */
+ u32 version; /* XLB + 0x44 */
+ u32 status; /* XLB + 0x48 */
+ u32 int_enable; /* XLB + 0x4c */
+ u32 addr_capture; /* XLB + 0x50 */
+ u32 bus_sig_capture; /* XLB + 0x54 */
+ u32 addr_timeout; /* XLB + 0x58 */
+ u32 data_timeout; /* XLB + 0x5c */
+ u32 bus_act_timeout; /* XLB + 0x60 */
+ u32 master_pri_enable; /* XLB + 0x64 */
+ u32 master_priority; /* XLB + 0x68 */
+ u32 base_address; /* XLB + 0x6c */
+ u32 snoop_window; /* XLB + 0x70 */
+};
+
+#define MPC52xx_XLB_CFG_PLDIS (1 << 31)
+#define MPC52xx_XLB_CFG_SNOOP (1 << 15)
+
+/* Clock Distribution control */
+struct mpc52xx_cdm {
+ u32 jtag_id; /* CDM + 0x00 reg0 read only */
+ u32 rstcfg; /* CDM + 0x04 reg1 read only */
+ u32 breadcrumb; /* CDM + 0x08 reg2 */
+
+ u8 mem_clk_sel; /* CDM + 0x0c reg3 byte0 */
+ u8 xlb_clk_sel; /* CDM + 0x0d reg3 byte1 read only */
+ u8 ipb_clk_sel; /* CDM + 0x0e reg3 byte2 */
+ u8 pci_clk_sel; /* CDM + 0x0f reg3 byte3 */
+
+ u8 ext_48mhz_en; /* CDM + 0x10 reg4 byte0 */
+ u8 fd_enable; /* CDM + 0x11 reg4 byte1 */
+ u16 fd_counters; /* CDM + 0x12 reg4 byte2,3 */
+
+ u32 clk_enables; /* CDM + 0x14 reg5 */
+
+ u8 osc_disable; /* CDM + 0x18 reg6 byte0 */
+ u8 reserved0[3]; /* CDM + 0x19 reg6 byte1,2,3 */
+
+ u8 ccs_sleep_enable; /* CDM + 0x1c reg7 byte0 */
+ u8 osc_sleep_enable; /* CDM + 0x1d reg7 byte1 */
+ u8 reserved1; /* CDM + 0x1e reg7 byte2 */
+ u8 ccs_qreq_test; /* CDM + 0x1f reg7 byte3 */
+
+ u8 soft_reset; /* CDM + 0x20 u8 byte0 */
+ u8 no_ckstp; /* CDM + 0x21 u8 byte0 */
+ u8 reserved2[2]; /* CDM + 0x22 u8 byte1,2,3 */
+
+ u8 pll_lock; /* CDM + 0x24 reg9 byte0 */
+ u8 pll_looselock; /* CDM + 0x25 reg9 byte1 */
+ u8 pll_sm_lockwin; /* CDM + 0x26 reg9 byte2 */
+ u8 reserved3; /* CDM + 0x27 reg9 byte3 */
+
+ u16 reserved4; /* CDM + 0x28 reg10 byte0,1 */
+ u16 mclken_div_psc1; /* CDM + 0x2a reg10 byte2,3 */
+
+ u16 reserved5; /* CDM + 0x2c reg11 byte0,1 */
+ u16 mclken_div_psc2; /* CDM + 0x2e reg11 byte2,3 */
+
+ u16 reserved6; /* CDM + 0x30 reg12 byte0,1 */
+ u16 mclken_div_psc3; /* CDM + 0x32 reg12 byte2,3 */
+
+ u16 reserved7; /* CDM + 0x34 reg13 byte0,1 */
+ u16 mclken_div_psc6; /* CDM + 0x36 reg13 byte2,3 */
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
========================================================================= */
+/* Prototypes for MPC52xx syslib
*/
+/*
========================================================================= */
+
+#ifndef __ASSEMBLY__
+
+extern void mpc52xx_init_irq(void);
+extern unsigned int mpc52xx_get_irq(void);
+
+static inline struct device_node *find_mpc52xx_picnode(void)
+{
+ return of_find_compatible_node(NULL, "interrupt-controller",
+ "mpc5200-pic");
+}
+
+ /* Matching of PSC function */
+struct mpc52xx_psc_func {
+ int id;
+ char *func;
+};
+
+extern int mpc52xx_match_psc_function(int psc_idx, const char *func);
+extern struct mpc52xx_psc_func mpc52xx_psc_functions[];
+ /* This array is to be defined in platform file */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MPC52xx_H__ */
-------------- next part --------------
A non-text attachment was scrubbed...
Name: nd.vcf
Type: text/x-vcard
Size: 249 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20061031/74a0ebb3/attachment.vcf>
More information about the Linuxppc-dev
mailing list