[PATCH] powerpc: Add FSL SEC node to documentation

[Kim Phillips]

On Mon, 20 Mar 2006 20:14:43 -0600
Hollis Blanchard <hollis at penguinppc.org> wrote:

> On Monday 20 March 2006 19:59, Kim Phillips wrote:
> > diff --git a/Documentation/powerpc/booting-without-of.txt 
> b/Documentation/powerpc/booting-without-of.txt
> > index d02c649..72f3241 100644
> > --- a/Documentation/powerpc/booting-without-of.txt
> > +++ b/Documentation/powerpc/booting-without-of.txt
> > @@ -1365,6 +1365,79 @@ platforms are moved over to use the flat
> >       };
> >  
> >  
> > +   g) Freescale SOC SEC Security Engines
> > +
> > +   Required properties:
> > +
> > +    - device_type : Should be "crypto"
> > +    - model : Model of the device.  Should be "SEC1" or "SEC2"
> > +    - compatible : Should be "talitos"
> [snip]
> 
> Have you consulted with any other vendors regarding these properties? I know 
> there is no IEEE1275 binding for these sorts of devices, but we can at least 
> attempt to standardize it (even in the absence of the Open Firmware Working 
> Group)...
> 
> -Hollis

I took a look at some equivalent devices, the problem is they're all so different, architecturally.  otoh, I'm open to collaborate with others on the list in an effort to standardize it.

btw, I had omitted some descriptor types.  Here's a replacement patch:


Documentation: Added FSL SOC SEC node definition

Updated the documentation to include the definition of the SEC device
node format for Freescale SOC devices.

Signed-off-by: Kim Phillips <kim.phillips at freescale.com>

---
commit 97d971c1d30e77a453cacaef72c32e00381ab02a
tree 4b815caece1c05b33309f8852eeccd90f020ca49
parent c4a1745aa09fc110afdefea0e5d025043e348bae
author Kim Phillips <kim.phillips at freescale.com> Mon, 20 Mar 2006 19:31:21 -0600
committer Kim Phillips <kim.phillips at freescale.com> Mon, 20 Mar 2006 19:31:21 -0600

 Documentation/powerpc/booting-without-of.txt |   73 ++++++++++++++++++++++++++
 1 files changed, 73 insertions(+), 0 deletions(-)

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index d02c649..72f3241 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1365,6 +1365,79 @@ platforms are moved over to use the flat
 	};
 
 
+   g) Freescale SOC SEC Security Engines
+
+   Required properties:
+
+    - device_type : Should be "crypto"
+    - model : Model of the device.  Should be "SEC1" or "SEC2"
+    - compatible : Should be "talitos"
+    - reg : Offset and length of the register set for the device
+    - interrupts : <a b> where a is the interrupt number and b is a
+      field that represents an encoding of the sense and level
+      information for the interrupt.  This should be encoded based on
+      the information in section 2) depending on the type of interrupt
+      controller you have.
+    - interrupt-parent : the phandle for the interrupt controller that
+      services interrupts for this device.
+    - num-channels : An integer representing the number of channels
+      available.  Most modern SEC's have 4 channels.
+    - channel-fifo-len : An integer representing the number of descriptor
+      pointers each channel fetch fifo can hold.  Most modern SEC channel 
+      fetch fifos can hold 24 descriptor pointers.
+    - exec-units-mask : The bitmask representing what execution units (EUs)
+      are available. It's a single 32 bit cell. EU information should be
+      encoded following the SEC's Descriptor Header Dword EU_SEL0 field 
+      documentation, i.e. as follows:
+
+        bit 0 = reserved - should be 0
+        bit 1 = set if SEC has the ARC4 EU (AFEU)
+        bit 2 = set if SEC has the DES/3DES EU (DEU)
+        bit 3 = set if SEC has the message digest EU (MDEU)
+        bit 4 = set if SEC has the random number generator EU (RNG)
+        bit 5 = set if SEC has the public key EU (PKEU)
+        bit 6 = set if SEC has the AES EU (AESU)
+        bit 7 = set if SEC has the Kasumi EU (KEU)
+
+      bits 8 through 31 are reserved for future SEC EUs.
+
+    - descriptor-types-mask : The bitmask representing what descriptors
+      are available. It's a single 32 bit cell. Descriptor type information 
+      should be encoded as follows:
+
+        bit 0  = set if SEC supports the aesu_ctr_nonsnoop descriptor type
+        bit 1  = set if SEC supports the ipsec_esp descriptor type
+        bit 2  = set if SEC supports the common_nonsnoop descriptor type
+        bit 3  = set if SEC supports the 802.11i AES ccmp descriptor type
+        bit 4  = set if SEC supports the hmac_snoop_no_afeu descriptor type
+        bit 5  = set if SEC supports the srtp descriptor type
+        bit 6  = set if SEC supports the non_hmac_snoop_no_afeu descriptor type
+        bit 7  = set if SEC supports the pkeu_assemble descriptor type
+        bit 8  = set if SEC supports the aesu_key_expand_output descriptor type
+        bit 9  = set if SEC supports the pkeu_ptmul descriptor type
+        bit 10 = set if SEC supports the common_nonsnoop_afeu descriptor type
+        bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type
+
+      ..and so on and so forth, following the SEC's Descriptor Header Dword
+      DESC_TYPE field definition in reference documentation.
+ 
+  Example:
+
+	/* MPC8548E */
+	crypto at 30000 {
+		device_type = "crypto";
+		model = "SEC2";
+		compatible = "talitos";
+		reg = <30000 10000>;
+		interrupts = <1d 3>;
+		interrupt-parent = <40000>;
+		num-channels = <4>;
+		channel-fifo-len = <24>;
+		exec-units-mask = <000000fe>;
+		descriptor-types-mask = <073f1127>;
+	};
+
+
    More devices will be defined as this spec matures.
 
 



--