[PATCH 12/20] [powerpc,powermac] Constify & voidify get_property()
Jeremy Kerr
jk at ozlabs.org
Tue Jul 4 16:47:19 EST 2006
Now that get_property() returns a void *, there's no need to cast its
return value. Also, treat the return value as const, so we can
constify get_property later.
powermac platform & macintosh driver changes.
Built for pmac32_defconfig, g5_defconfig
Signed-off-by: Jeremy Kerr <jk at ozlabs.org>
---
arch/powerpc/platforms/powermac/backlight.c | 3 +-
arch/powerpc/platforms/powermac/cpufreq_32.c | 23 ++++++++--------
arch/powerpc/platforms/powermac/cpufreq_64.c | 27 ++++++++++---------
arch/powerpc/platforms/powermac/feature.c | 30 ++++++++++-----------
arch/powerpc/platforms/powermac/low_i2c.c | 24 ++++++++---------
arch/powerpc/platforms/powermac/pci.c | 37 ++++++++++++++-------------
arch/powerpc/platforms/powermac/pfunc_base.c | 2 -
arch/powerpc/platforms/powermac/pfunc_core.c | 5 ++-
arch/powerpc/platforms/powermac/setup.c | 18 +++++--------
arch/powerpc/platforms/powermac/smp.c | 7 ++---
arch/powerpc/platforms/powermac/udbg_scc.c | 10 +++----
drivers/i2c/busses/i2c-powermac.c | 3 +-
drivers/ide/ppc/pmac.c | 6 ++--
drivers/macintosh/macio_asic.c | 10 ++++---
drivers/macintosh/macio_sysfs.c | 8 ++---
drivers/macintosh/smu.c | 19 ++++++-------
drivers/macintosh/therm_adt746x.c | 8 ++---
drivers/macintosh/therm_pm72.c | 14 +++++-----
drivers/macintosh/therm_windtunnel.c | 4 +-
drivers/macintosh/via-cuda.c | 4 +-
drivers/macintosh/via-pmu-led.c | 2 -
drivers/macintosh/via-pmu.c | 10 +++----
drivers/macintosh/windfarm_pm81.c | 4 +-
drivers/macintosh/windfarm_pm91.c | 2 -
drivers/macintosh/windfarm_smu_controls.c | 13 +++++----
drivers/macintosh/windfarm_smu_sat.c | 8 ++---
drivers/macintosh/windfarm_smu_sensors.c | 12 ++++----
drivers/serial/pmac_zilog.c | 9 +++---
include/asm-powerpc/smu.h | 2 -
29 files changed, 166 insertions(+), 158 deletions(-)
Index: linux-2.6/arch/powerpc/platforms/powermac/cpufreq_32.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ linux-2.6/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -421,7 +421,7 @@ static int pmac_cpufreq_cpu_init(struct
static u32 read_gpio(struct device_node *np)
{
- u32 *reg = (u32 *)get_property(np, "reg", NULL);
+ const u32 *reg = get_property(np, "reg", NULL);
u32 offset;
if (reg == NULL)
@@ -497,7 +497,7 @@ static int pmac_cpufreq_init_MacRISC3(st
"frequency-gpio");
struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL,
"slewing-done");
- u32 *value;
+ const u32 *value;
/*
* Check to see if it's GPIO driven or PMU only
@@ -519,15 +519,15 @@ static int pmac_cpufreq_init_MacRISC3(st
*/
if (frequency_gpio && slew_done_gpio) {
int lenp, rc;
- u32 *freqs, *ratio;
+ const u32 *freqs, *ratio;
- freqs = (u32 *)get_property(cpunode, "bus-frequencies", &lenp);
+ freqs = get_property(cpunode, "bus-frequencies", &lenp);
lenp /= sizeof(u32);
if (freqs == NULL || lenp != 2) {
printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
return 1;
}
- ratio = (u32 *)get_property(cpunode, "processor-to-bus-ratio*2", NULL);
+ ratio = get_property(cpunode, "processor-to-bus-ratio*2", NULL);
if (ratio == NULL) {
printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
return 1;
@@ -562,7 +562,7 @@ static int pmac_cpufreq_init_MacRISC3(st
/* If we use the PMU, look for the min & max frequencies in the
* device-tree
*/
- value = (u32 *)get_property(cpunode, "min-clock-frequency", NULL);
+ value = get_property(cpunode, "min-clock-frequency", NULL);
if (!value)
return 1;
low_freq = (*value) / 1000;
@@ -571,7 +571,7 @@ static int pmac_cpufreq_init_MacRISC3(st
if (low_freq < 100000)
low_freq *= 10;
- value = (u32 *)get_property(cpunode, "max-clock-frequency", NULL);
+ value = get_property(cpunode, "max-clock-frequency", NULL);
if (!value)
return 1;
hi_freq = (*value) / 1000;
@@ -611,13 +611,14 @@ static int pmac_cpufreq_init_7447A(struc
static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
{
struct device_node *volt_gpio_np;
- u32 pvr, *value;
+ u32 pvr;
+ const u32 *value;
if (get_property(cpunode, "dynamic-power-step", NULL) == NULL)
return 1;
hi_freq = cur_freq;
- value = (u32 *)get_property(cpunode, "reduced-clock-frequency", NULL);
+ value = get_property(cpunode, "reduced-clock-frequency", NULL);
if (!value)
return 1;
low_freq = (*value) / 1000;
@@ -650,7 +651,7 @@ static int pmac_cpufreq_init_750FX(struc
static int __init pmac_cpufreq_setup(void)
{
struct device_node *cpunode;
- u32 *value;
+ const u32 *value;
if (strstr(cmd_line, "nocpufreq"))
return 0;
@@ -661,7 +662,7 @@ static int __init pmac_cpufreq_setup(voi
goto out;
/* Get current cpu clock freq */
- value = (u32 *)get_property(cpunode, "clock-frequency", NULL);
+ value = get_property(cpunode, "clock-frequency", NULL);
if (!value)
goto out;
cur_freq = (*value) / 1000;
Index: linux-2.6/arch/powerpc/platforms/powermac/cpufreq_64.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ linux-2.6/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -82,7 +82,7 @@ static struct freq_attr* g5_cpu_freqs_at
/* Power mode data is an array of the 32 bits PCR values to use for
* the various frequencies, retrieved from the device-tree
*/
-static u32 *g5_pmode_data;
+static const u32 *g5_pmode_data;
static int g5_pmode_max;
static int g5_pmode_cur;
@@ -381,7 +381,8 @@ static int __init g5_neo2_cpufreq_init(s
unsigned int psize, ssize;
unsigned long max_freq;
char *freq_method, *volt_method;
- u32 *valp, pvr_hi;
+ const u32 *valp;
+ u32 pvr_hi;
int use_volts_vdnap = 0;
int use_volts_smu = 0;
int rc = -ENODEV;
@@ -399,8 +400,7 @@ static int __init g5_neo2_cpufreq_init(s
/* Get first CPU node */
for (cpunode = NULL;
(cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
- u32 *reg =
- (u32 *)get_property(cpunode, "reg", NULL);
+ const u32 *reg = get_property(cpunode, "reg", NULL);
if (reg == NULL || (*reg) != 0)
continue;
if (!strcmp(cpunode->type, "cpu"))
@@ -412,7 +412,7 @@ static int __init g5_neo2_cpufreq_init(s
}
/* Check 970FX for now */
- valp = (u32 *)get_property(cpunode, "cpu-version", NULL);
+ valp = get_property(cpunode, "cpu-version", NULL);
if (!valp) {
DBG("No cpu-version property !\n");
goto bail_noprops;
@@ -424,7 +424,7 @@ static int __init g5_neo2_cpufreq_init(s
}
/* Look for the powertune data in the device-tree */
- g5_pmode_data = (u32 *)get_property(cpunode, "power-mode-data",&psize);
+ g5_pmode_data = get_property(cpunode, "power-mode-data",&psize);
if (!g5_pmode_data) {
DBG("No power-mode-data !\n");
goto bail_noprops;
@@ -432,7 +432,7 @@ static int __init g5_neo2_cpufreq_init(s
g5_pmode_max = psize / sizeof(u32) - 1;
if (use_volts_smu) {
- struct smu_sdbp_header *shdr;
+ const struct smu_sdbp_header *shdr;
/* Look for the FVT table */
shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
@@ -483,7 +483,7 @@ static int __init g5_neo2_cpufreq_init(s
* half freq in this version. So far, I haven't yet seen a machine
* supporting anything else.
*/
- valp = (u32 *)get_property(cpunode, "clock-frequency", NULL);
+ valp = get_property(cpunode, "clock-frequency", NULL);
if (!valp)
return -ENODEV;
max_freq = (*valp)/1000;
@@ -528,8 +528,8 @@ static int __init g5_neo2_cpufreq_init(s
static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
{
struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL;
- u8 *eeprom = NULL;
- u32 *valp;
+ const u8 *eeprom = NULL;
+ const u32 *valp;
u64 max_freq, min_freq, ih, il;
int has_volt = 1, rc = 0;
@@ -547,7 +547,7 @@ static int __init g5_pm72_cpufreq_init(s
/* Lookup the cpuid eeprom node */
cpuid = of_find_node_by_path("/u3 at 0,f8000000/i2c at f8001000/cpuid at a0");
if (cpuid != NULL)
- eeprom = (u8 *)get_property(cpuid, "cpuid", NULL);
+ eeprom = get_property(cpuid, "cpuid", NULL);
if (eeprom == NULL) {
printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n");
rc = -ENODEV;
@@ -557,7 +557,8 @@ static int __init g5_pm72_cpufreq_init(s
/* Lookup the i2c hwclock */
for (hwclock = NULL;
(hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){
- char *loc = get_property(hwclock, "hwctrl-location", NULL);
+ const char *loc = get_property(hwclock,
+ "hwctrl-location", NULL);
if (loc == NULL)
continue;
if (strcmp(loc, "CPU CLOCK"))
@@ -621,7 +622,7 @@ static int __init g5_pm72_cpufreq_init(s
*/
/* Get max frequency from device-tree */
- valp = (u32 *)get_property(cpunode, "clock-frequency", NULL);
+ valp = get_property(cpunode, "clock-frequency", NULL);
if (!valp) {
printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n");
rc = -ENODEV;
Index: linux-2.6/arch/powerpc/platforms/powermac/feature.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/feature.c
+++ linux-2.6/arch/powerpc/platforms/powermac/feature.c
@@ -1058,8 +1058,8 @@ core99_reset_cpu(struct device_node *nod
if (np == NULL)
return -ENODEV;
for (np = np->child; np != NULL; np = np->sibling) {
- u32 *num = (u32 *)get_property(np, "reg", NULL);
- u32 *rst = (u32 *)get_property(np, "soft-reset", NULL);
+ u32 *num = get_property(np, "reg", NULL);
+ u32 *rst = get_property(np, "soft-reset", NULL);
if (num == NULL || rst == NULL)
continue;
if (param == *num) {
@@ -1087,7 +1087,7 @@ core99_usb_enable(struct device_node *no
{
struct macio_chip *macio;
unsigned long flags;
- char *prop;
+ const char *prop;
int number;
u32 reg;
@@ -1096,7 +1096,7 @@ core99_usb_enable(struct device_node *no
macio->type != macio_intrepid)
return -ENODEV;
- prop = (char *)get_property(node, "AAPL,clock-id", NULL);
+ prop = get_property(node, "AAPL,clock-id", NULL);
if (!prop)
return -ENODEV;
if (strncmp(prop, "usb0u048", 8) == 0)
@@ -1507,8 +1507,8 @@ static long g5_reset_cpu(struct device_n
if (np == NULL)
return -ENODEV;
for (np = np->child; np != NULL; np = np->sibling) {
- u32 *num = (u32 *)get_property(np, "reg", NULL);
- u32 *rst = (u32 *)get_property(np, "soft-reset", NULL);
+ const u32 *num = get_property(np, "reg", NULL);
+ const u32 *rst = get_property(np, "soft-reset", NULL);
if (num == NULL || rst == NULL)
continue;
if (param == *num) {
@@ -2408,7 +2408,7 @@ static int __init probe_motherboard(void
*/
dt = find_devices("device-tree");
if (dt != NULL)
- model = (const char *) get_property(dt, "model", NULL);
+ model = get_property(dt, "model", NULL);
for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
pmac_mb = pmac_mb_defs[i];
@@ -2536,7 +2536,7 @@ found:
*/
static void __init probe_uninorth(void)
{
- u32 *addrp;
+ const u32 *addrp;
phys_addr_t address;
unsigned long actrl;
@@ -2555,7 +2555,7 @@ static void __init probe_uninorth(void)
if (uninorth_node == NULL)
return;
- addrp = (u32 *)get_property(uninorth_node, "reg", NULL);
+ addrp = get_property(uninorth_node, "reg", NULL);
if (addrp == NULL)
return;
address = of_translate_address(uninorth_node, addrp);
@@ -2596,7 +2596,7 @@ static void __init probe_one_macio(const
struct device_node* node;
int i;
volatile u32 __iomem *base;
- u32 *addrp, *revp;
+ const u32 *addrp, *revp;
phys_addr_t addr;
u64 size;
@@ -2639,7 +2639,7 @@ static void __init probe_one_macio(const
return;
}
if (type == macio_keylargo || type == macio_keylargo2) {
- u32 *did = (u32 *)get_property(node, "device-id", NULL);
+ const u32 *did = get_property(node, "device-id", NULL);
if (*did == 0x00000025)
type = macio_pangea;
if (*did == 0x0000003e)
@@ -2652,7 +2652,7 @@ static void __init probe_one_macio(const
macio_chips[i].base = base;
macio_chips[i].flags = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON;
macio_chips[i].name = macio_names[type];
- revp = (u32 *)get_property(node, "revision-id", NULL);
+ revp = get_property(node, "revision-id", NULL);
if (revp)
macio_chips[i].rev = *revp;
printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
@@ -2695,15 +2695,15 @@ static void __init
initial_serial_shutdown(struct device_node *np)
{
int len;
- struct slot_names_prop {
+ const struct slot_names_prop {
int count;
char name[1];
} *slots;
- char *conn;
+ const char *conn;
int port_type = PMAC_SCC_ASYNC;
int modem = 0;
- slots = (struct slot_names_prop *)get_property(np, "slot-names", &len);
+ slots = get_property(np, "slot-names", &len);
conn = get_property(np, "AAPL,connector", &len);
if (conn && (strcmp(conn, "infrared") == 0))
port_type = PMAC_SCC_IRDA;
Index: linux-2.6/arch/powerpc/platforms/powermac/low_i2c.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/low_i2c.c
+++ linux-2.6/arch/powerpc/platforms/powermac/low_i2c.c
@@ -477,7 +477,8 @@ static int kw_i2c_xfer(struct pmac_i2c_b
static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
{
struct pmac_i2c_host_kw *host;
- u32 *psteps, *prate, *addrp, steps;
+ const u32 *psteps, *prate, *addrp;
+ u32 steps;
host = kzalloc(sizeof(struct pmac_i2c_host_kw), GFP_KERNEL);
if (host == NULL) {
@@ -490,7 +491,7 @@ static struct pmac_i2c_host_kw *__init k
* on all i2c keywest nodes so far ... we would have to fallback
* to macio parsing if that wasn't the case
*/
- addrp = (u32 *)get_property(np, "AAPL,address", NULL);
+ addrp = get_property(np, "AAPL,address", NULL);
if (addrp == NULL) {
printk(KERN_ERR "low_i2c: Can't find address for %s\n",
np->full_name);
@@ -504,13 +505,13 @@ static struct pmac_i2c_host_kw *__init k
host->timeout_timer.function = kw_i2c_timeout;
host->timeout_timer.data = (unsigned long)host;
- psteps = (u32 *)get_property(np, "AAPL,address-step", NULL);
+ psteps = get_property(np, "AAPL,address-step", NULL);
steps = psteps ? (*psteps) : 0x10;
for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++)
steps >>= 1;
/* Select interface rate */
host->speed = KW_I2C_MODE_25KHZ;
- prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL);
+ prate = get_property(np, "AAPL,i2c-rate", NULL);
if (prate) switch(*prate) {
case 100:
host->speed = KW_I2C_MODE_100KHZ;
@@ -618,8 +619,8 @@ static void __init kw_i2c_probe(void)
} else {
for (child = NULL;
(child = of_get_next_child(np, child)) != NULL;) {
- u32 *reg =
- (u32 *)get_property(child, "reg", NULL);
+ const u32 *reg = get_property(child,
+ "reg", NULL);
if (reg == NULL)
continue;
kw_i2c_add(host, np, child, *reg);
@@ -881,7 +882,7 @@ static void __init smu_i2c_probe(void)
{
struct device_node *controller, *busnode;
struct pmac_i2c_bus *bus;
- u32 *reg;
+ const u32 *reg;
int sz;
if (!smu_present())
@@ -904,7 +905,7 @@ static void __init smu_i2c_probe(void)
if (strcmp(busnode->type, "i2c") &&
strcmp(busnode->type, "i2c-bus"))
continue;
- reg = (u32 *)get_property(busnode, "reg", NULL);
+ reg = get_property(busnode, "reg", NULL);
if (reg == NULL)
continue;
@@ -948,9 +949,8 @@ struct pmac_i2c_bus *pmac_i2c_find_bus(s
list_for_each_entry(bus, &pmac_i2c_busses, link) {
if (p == bus->busnode) {
if (prev && bus->flags & pmac_i2c_multibus) {
- u32 *reg;
- reg = (u32 *)get_property(prev, "reg",
- NULL);
+ const u32 *reg;
+ reg = get_property(prev, "reg", NULL);
if (!reg)
continue;
if (((*reg) >> 8) != bus->channel)
@@ -971,7 +971,7 @@ EXPORT_SYMBOL_GPL(pmac_i2c_find_bus);
u8 pmac_i2c_get_dev_addr(struct device_node *device)
{
- u32 *reg = (u32 *)get_property(device, "reg", NULL);
+ const u32 *reg = get_property(device, "reg", NULL);
if (reg == NULL)
return 0;
Index: linux-2.6/arch/powerpc/platforms/powermac/pci.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/pci.c
+++ linux-2.6/arch/powerpc/platforms/powermac/pci.c
@@ -69,16 +69,16 @@ struct device_node *k2_skiplist[2];
static int __init fixup_one_level_bus_range(struct device_node *node, int higher)
{
for (; node != 0;node = node->sibling) {
- int * bus_range;
- unsigned int *class_code;
+ const int * bus_range;
+ const unsigned int *class_code;
int len;
/* For PCI<->PCI bridges or CardBus bridges, we go down */
- class_code = (unsigned int *) get_property(node, "class-code", NULL);
+ class_code = get_property(node, "class-code", NULL);
if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
continue;
- bus_range = (int *) get_property(node, "bus-range", &len);
+ bus_range = get_property(node, "bus-range", &len);
if (bus_range != NULL && len > 2 * sizeof(int)) {
if (bus_range[1] > higher)
higher = bus_range[1];
@@ -96,13 +96,15 @@ static int __init fixup_one_level_bus_ra
*/
static void __init fixup_bus_range(struct device_node *bridge)
{
- int * bus_range;
- int len;
+ int *bus_range, len;
+ struct property *prop;
/* Lookup the "bus-range" property for the hose */
- bus_range = (int *) get_property(bridge, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int))
+ prop = of_find_property(bridge, "bus-range", &len);
+ if (prop == NULL || prop->length < 2 * sizeof(int))
return;
+
+ bus_range = (int *)prop->value;
bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
}
@@ -240,7 +242,7 @@ static struct pci_ops macrisc_pci_ops =
static int chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
{
struct device_node *np;
- u32 *vendor, *device;
+ const u32 *vendor, *device;
if (offset >= 0x100)
return PCIBIOS_BAD_REGISTER_NUMBER;
@@ -248,8 +250,8 @@ static int chaos_validate_dev(struct pci
if (np == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
- vendor = (u32 *)get_property(np, "vendor-id", NULL);
- device = (u32 *)get_property(np, "device-id", NULL);
+ vendor = get_property(np, "vendor-id", NULL);
+ device = get_property(np, "device-id", NULL);
if (vendor == NULL || device == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -689,20 +691,21 @@ static void __init fixup_nec_usb2(void)
for (nec = NULL; (nec = of_find_node_by_name(nec, "usb")) != NULL;) {
struct pci_controller *hose;
- u32 data, *prop;
+ u32 data;
+ const u32 *prop;
u8 bus, devfn;
- prop = (u32 *)get_property(nec, "vendor-id", NULL);
+ prop = get_property(nec, "vendor-id", NULL);
if (prop == NULL)
continue;
if (0x1033 != *prop)
continue;
- prop = (u32 *)get_property(nec, "device-id", NULL);
+ prop = get_property(nec, "device-id", NULL);
if (prop == NULL)
continue;
if (0x0035 != *prop)
continue;
- prop = (u32 *)get_property(nec, "reg", NULL);
+ prop = get_property(nec, "reg", NULL);
if (prop == NULL)
continue;
devfn = (prop[0] >> 8) & 0xff;
@@ -901,7 +904,7 @@ static int __init add_bridge(struct devi
struct pci_controller *hose;
struct resource rsrc;
char *disp_name;
- int *bus_range;
+ const int *bus_range;
int primary = 1, has_address = 0;
DBG("Adding PCI host bridge %s\n", dev->full_name);
@@ -910,7 +913,7 @@ static int __init add_bridge(struct devi
has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
/* Get bus range if any */
- bus_range = (int *) get_property(dev, "bus-range", &len);
+ bus_range = get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %s, assume"
" bus 0\n", dev->full_name);
Index: linux-2.6/arch/powerpc/platforms/powermac/pfunc_base.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/pfunc_base.c
+++ linux-2.6/arch/powerpc/platforms/powermac/pfunc_base.c
@@ -114,7 +114,7 @@ static void macio_gpio_init_one(struct m
* we just create them all
*/
for (gp = NULL; (gp = of_get_next_child(gparent, gp)) != NULL;) {
- u32 *reg = (u32 *)get_property(gp, "reg", NULL);
+ const u32 *reg = get_property(gp, "reg", NULL);
unsigned long offset;
if (reg == NULL)
continue;
Index: linux-2.6/arch/powerpc/platforms/powermac/pfunc_core.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/pfunc_core.c
+++ linux-2.6/arch/powerpc/platforms/powermac/pfunc_core.c
@@ -813,14 +813,15 @@ struct pmf_function *__pmf_find_function
struct pmf_device *dev;
struct pmf_function *func, *result = NULL;
char fname[64];
- u32 *prop, ph;
+ const u32 *prop;
+ u32 ph;
/*
* Look for a "platform-*" function reference. If we can't find
* one, then we fallback to a direct call attempt
*/
snprintf(fname, 63, "platform-%s", name);
- prop = (u32 *)get_property(target, fname, NULL);
+ prop = get_property(target, fname, NULL);
if (prop == NULL)
goto find_it;
ph = *prop;
Index: linux-2.6/arch/powerpc/platforms/powermac/smp.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/smp.c
+++ linux-2.6/arch/powerpc/platforms/powermac/smp.c
@@ -548,7 +548,7 @@ static void __init smp_core99_setup_i2c_
struct device_node *cc = NULL;
struct device_node *p;
const char *name = NULL;
- u32 *reg;
+ const u32 *reg;
int ok;
/* Look for the clock chip */
@@ -562,7 +562,7 @@ static void __init smp_core99_setup_i2c_
pmac_tb_clock_chip_host = pmac_i2c_find_bus(cc);
if (pmac_tb_clock_chip_host == NULL)
continue;
- reg = (u32 *)get_property(cc, "reg", NULL);
+ reg = get_property(cc, "reg", NULL);
if (reg == NULL)
continue;
switch (*reg) {
@@ -707,8 +707,7 @@ static void __init smp_core99_setup(int
core99_tb_gpio = KL_GPIO_TB_ENABLE; /* default value */
cpu = of_find_node_by_type(NULL, "cpu");
if (cpu != NULL) {
- tbprop = (u32 *)get_property(cpu, "timebase-enable",
- NULL);
+ tbprop = get_property(cpu, "timebase-enable", NULL);
if (tbprop)
core99_tb_gpio = *tbprop;
of_node_put(cpu);
Index: linux-2.6/arch/powerpc/platforms/powermac/udbg_scc.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/udbg_scc.c
+++ linux-2.6/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -68,11 +68,11 @@ static unsigned char scc_inittab[] = {
void udbg_scc_init(int force_scc)
{
- u32 *reg;
+ const u32 *reg;
unsigned long addr;
struct device_node *stdout = NULL, *escc = NULL, *macio = NULL;
struct device_node *ch, *ch_def = NULL, *ch_a = NULL;
- char *path;
+ const char *path;
int i, x;
escc = of_find_node_by_name(NULL, "escc");
@@ -81,7 +81,7 @@ void udbg_scc_init(int force_scc)
macio = of_get_parent(escc);
if (macio == NULL)
goto bail;
- path = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
+ path = get_property(of_chosen, "linux,stdout-path", NULL);
if (path != NULL)
stdout = of_find_node_by_path(path);
for (ch = NULL; (ch = of_get_next_child(escc, ch)) != NULL;) {
@@ -96,13 +96,13 @@ void udbg_scc_init(int force_scc)
ch = ch_def ? ch_def : ch_a;
/* Get address within mac-io ASIC */
- reg = (u32 *)get_property(escc, "reg", NULL);
+ reg = get_property(escc, "reg", NULL);
if (reg == NULL)
goto bail;
addr = reg[0];
/* Get address of mac-io PCI itself */
- reg = (u32 *)get_property(macio, "assigned-addresses", NULL);
+ reg = get_property(macio, "assigned-addresses", NULL);
if (reg == NULL)
goto bail;
addr += reg[2];
Index: linux-2.6/arch/powerpc/platforms/powermac/backlight.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/backlight.c
+++ linux-2.6/arch/powerpc/platforms/powermac/backlight.c
@@ -38,7 +38,8 @@ int pmac_has_backlight_type(const char *
struct device_node* bk_node = find_devices("backlight");
if (bk_node) {
- char *prop = get_property(bk_node, "backlight-control", NULL);
+ const char *prop = get_property(bk_node,
+ "backlight-control", NULL);
if (prop && strncmp(prop, type, strlen(type)) == 0)
return 1;
}
Index: linux-2.6/arch/powerpc/platforms/powermac/setup.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/setup.c
+++ linux-2.6/arch/powerpc/platforms/powermac/setup.c
@@ -116,7 +116,7 @@ extern struct smp_ops_t core99_smp_ops;
static void pmac_show_cpuinfo(struct seq_file *m)
{
struct device_node *np;
- char *pp;
+ const char *pp;
int plen;
int mbmodel;
unsigned int mbflags;
@@ -134,12 +134,12 @@ static void pmac_show_cpuinfo(struct seq
seq_printf(m, "machine\t\t: ");
np = of_find_node_by_path("/");
if (np != NULL) {
- pp = (char *) get_property(np, "model", NULL);
+ pp = get_property(np, "model", NULL);
if (pp != NULL)
seq_printf(m, "%s\n", pp);
else
seq_printf(m, "PowerMac\n");
- pp = (char *) get_property(np, "compatible", &plen);
+ pp = get_property(np, "compatible", &plen);
if (pp != NULL) {
seq_printf(m, "motherboard\t:");
while (plen > 0) {
@@ -163,10 +163,8 @@ static void pmac_show_cpuinfo(struct seq
if (np == NULL)
np = of_find_node_by_type(NULL, "cache");
if (np != NULL) {
- unsigned int *ic = (unsigned int *)
- get_property(np, "i-cache-size", NULL);
- unsigned int *dc = (unsigned int *)
- get_property(np, "d-cache-size", NULL);
+ const unsigned int *ic = get_property(np, "i-cache-size", NULL);
+ const unsigned int *dc = get_property(np, "d-cache-size", NULL);
seq_printf(m, "L2 cache\t:");
has_l2cache = 1;
if (get_property(np, "cache-unified", NULL) != 0 && dc) {
@@ -254,7 +252,7 @@ static void __init l2cr_init(void)
if (np == 0)
np = find_type_devices("cpu");
if (np != 0) {
- unsigned int *l2cr = (unsigned int *)
+ const unsigned int *l2cr =
get_property(np, "l2cr-value", NULL);
if (l2cr != 0) {
ppc_override_l2cr = 1;
@@ -277,7 +275,7 @@ static void __init l2cr_init(void)
static void __init pmac_setup_arch(void)
{
struct device_node *cpu, *ic;
- int *fp;
+ const int *fp;
unsigned long pvr;
pvr = PVR_VER(mfspr(SPRN_PVR));
@@ -287,7 +285,7 @@ static void __init pmac_setup_arch(void)
loops_per_jiffy = 50000000 / HZ;
cpu = of_find_node_by_type(NULL, "cpu");
if (cpu != NULL) {
- fp = (int *) get_property(cpu, "clock-frequency", NULL);
+ fp = get_property(cpu, "clock-frequency", NULL);
if (fp != NULL) {
if (pvr >= 0x30 && pvr < 0x80)
/* PPC970 etc. */
Index: linux-2.6/drivers/macintosh/therm_adt746x.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/therm_adt746x.c
+++ linux-2.6/drivers/macintosh/therm_adt746x.c
@@ -47,7 +47,7 @@ static u8 FAN_SPD_SET[2] = {0x30, 0x31};
static u8 default_limits_local[3] = {70, 50, 70}; /* local, sensor1, sensor2 */
static u8 default_limits_chip[3] = {80, 65, 80}; /* local, sensor1, sensor2 */
-static char *sensor_location[3] = {NULL, NULL, NULL};
+static const char *sensor_location[3] = {NULL, NULL, NULL};
static int limit_adjust = 0;
static int fan_speed = -1;
@@ -553,7 +553,7 @@ static int __init
thermostat_init(void)
{
struct device_node* np;
- u32 *prop;
+ const u32 *prop;
int i = 0, offset = 0;
np = of_find_node_by_name(NULL, "fan");
@@ -566,13 +566,13 @@ thermostat_init(void)
else
return -ENODEV;
- prop = (u32 *)get_property(np, "hwsensor-params-version", NULL);
+ prop = get_property(np, "hwsensor-params-version", NULL);
printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop,
(*prop == 1)?"":"un");
if (*prop != 1)
return -ENODEV;
- prop = (u32 *)get_property(np, "reg", NULL);
+ prop = get_property(np, "reg", NULL);
if (!prop)
return -ENODEV;
Index: linux-2.6/drivers/macintosh/macio_asic.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/macio_asic.c
+++ linux-2.6/drivers/macintosh/macio_asic.c
@@ -139,7 +139,9 @@ static int macio_uevent(struct device *d
{
struct macio_dev * macio_dev;
struct of_device * of;
- char *scratch, *compat, *compat2;
+ char *scratch;
+ const char *compat, *compat2;
+
int i = 0;
int length, cplen, cplen2, seen = 0;
@@ -173,7 +175,7 @@ static int macio_uevent(struct device *d
* it's not really legal to split it out with commas. We split it
* up using a number of environment variables instead. */
- compat = (char *) get_property(of->node, "compatible", &cplen);
+ compat = get_property(of->node, "compatible", &cplen);
compat2 = compat;
cplen2= cplen;
while (compat && cplen > 0) {
@@ -454,7 +456,7 @@ static struct macio_dev * macio_add_one_
struct resource *parent_res)
{
struct macio_dev *dev;
- u32 *reg;
+ const u32 *reg;
if (np == NULL)
return NULL;
@@ -489,7 +491,7 @@ static struct macio_dev * macio_add_one_
#endif
MAX_NODE_NAME_SIZE, np->name);
} else {
- reg = (u32 *)get_property(np, "reg", NULL);
+ reg = get_property(np, "reg", NULL);
sprintf(dev->ofdev.dev.bus_id, "%1d.%08x:%.*s",
chip->lbus.index,
reg ? *reg : 0, MAX_NODE_NAME_SIZE, np->name);
Index: linux-2.6/drivers/macintosh/smu.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/smu.c
+++ linux-2.6/drivers/macintosh/smu.c
@@ -447,7 +447,7 @@ EXPORT_SYMBOL(smu_present);
int __init smu_init (void)
{
struct device_node *np;
- u32 *data;
+ const u32 *data;
np = of_find_node_by_type(NULL, "smu");
if (np == NULL)
@@ -483,7 +483,7 @@ int __init smu_init (void)
printk(KERN_ERR "SMU: Can't find doorbell GPIO !\n");
goto fail;
}
- data = (u32 *)get_property(np, "reg", NULL);
+ data = get_property(np, "reg", NULL);
if (data == NULL) {
of_node_put(np);
printk(KERN_ERR "SMU: Can't find doorbell GPIO address !\n");
@@ -506,7 +506,7 @@ int __init smu_init (void)
np = of_find_node_by_name(NULL, "smu-interrupt");
if (np == NULL)
break;
- data = (u32 *)get_property(np, "reg", NULL);
+ data = get_property(np, "reg", NULL);
if (data == NULL) {
of_node_put(np);
break;
@@ -959,11 +959,11 @@ static struct smu_sdbp_header *smu_creat
/* Note: Only allowed to return error code in pointers (using ERR_PTR)
* when interruptible is 1
*/
-struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size,
- int interruptible)
+const struct smu_sdbp_header *__smu_get_sdb_partition(int id,
+ unsigned int *size, int interruptible)
{
char pname[32];
- struct smu_sdbp_header *part;
+ const struct smu_sdbp_header *part;
if (!smu)
return NULL;
@@ -980,8 +980,7 @@ struct smu_sdbp_header *__smu_get_sdb_pa
} else
mutex_lock(&smu_part_access);
- part = (struct smu_sdbp_header *)get_property(smu->of_node,
- pname, size);
+ part = get_property(smu->of_node, pname, size);
if (part == NULL) {
DPRINTK("trying to extract from SMU ...\n");
part = smu_create_sdb_partition(id);
@@ -992,7 +991,7 @@ struct smu_sdbp_header *__smu_get_sdb_pa
return part;
}
-struct smu_sdbp_header *smu_get_sdb_partition(int id, unsigned int *size)
+const struct smu_sdbp_header *smu_get_sdb_partition(int id, unsigned int *size)
{
return __smu_get_sdb_partition(id, size, 0);
}
@@ -1071,7 +1070,7 @@ static ssize_t smu_write(struct file *fi
pp->mode = smu_file_events;
return 0;
} else if (hdr.cmdtype == SMU_CMDTYPE_GET_PARTITION) {
- struct smu_sdbp_header *part;
+ const struct smu_sdbp_header *part;
part = __smu_get_sdb_partition(hdr.cmd, NULL, 1);
if (part == NULL)
return -EINVAL;
Index: linux-2.6/drivers/macintosh/therm_pm72.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/therm_pm72.c
+++ linux-2.6/drivers/macintosh/therm_pm72.c
@@ -617,7 +617,7 @@ static int read_eeprom(int cpu, struct m
{
struct device_node *np;
char nodename[64];
- u8 *data;
+ const u8 *data;
int len;
/* prom.c routine for finding a node by path is a bit brain dead
@@ -630,7 +630,7 @@ static int read_eeprom(int cpu, struct m
printk(KERN_ERR "therm_pm72: Failed to retrieve cpuid node from device-tree\n");
return -ENODEV;
}
- data = (u8 *)get_property(np, "cpuid", &len);
+ data = get_property(np, "cpuid", &len);
if (data == NULL) {
printk(KERN_ERR "therm_pm72: Failed to retrieve cpuid property from device-tree\n");
of_node_put(np);
@@ -1284,7 +1284,7 @@ static int init_backside_state(struct ba
*/
u3 = of_find_node_by_path("/u3 at 0,f8000000");
if (u3 != NULL) {
- u32 *vers = (u32 *)get_property(u3, "device-rev", NULL);
+ const u32 *vers = get_property(u3, "device-rev", NULL);
if (vers)
if (((*vers) & 0x3f) < 0x34)
u3h = 0;
@@ -1923,8 +1923,8 @@ static void fcu_lookup_fans(struct devic
while ((np = of_get_next_child(fcu_node, np)) != NULL) {
int type = -1;
- char *loc;
- u32 *reg;
+ const char *loc;
+ const u32 *reg;
DBG(" control: %s, type: %s\n", np->name, np->type);
@@ -1940,8 +1940,8 @@ static void fcu_lookup_fans(struct devic
continue;
/* Lookup for a matching location */
- loc = (char *)get_property(np, "location", NULL);
- reg = (u32 *)get_property(np, "reg", NULL);
+ loc = get_property(np, "location", NULL);
+ reg = get_property(np, "reg", NULL);
if (loc == NULL || reg == NULL)
continue;
DBG(" matching location: %s, reg: 0x%08x\n", loc, *reg);
Index: linux-2.6/drivers/macintosh/via-cuda.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/via-cuda.c
+++ linux-2.6/drivers/macintosh/via-cuda.c
@@ -123,7 +123,7 @@ int __init find_via_cuda(void)
{
struct adb_request req;
phys_addr_t taddr;
- u32 *reg;
+ const u32 *reg;
int err;
if (vias != 0)
@@ -132,7 +132,7 @@ int __init find_via_cuda(void)
if (vias == 0)
return 0;
- reg = (u32 *)get_property(vias, "reg", NULL);
+ reg = get_property(vias, "reg", NULL);
if (reg == NULL) {
printk(KERN_ERR "via-cuda: No \"reg\" property !\n");
goto fail;
Index: linux-2.6/drivers/macintosh/via-pmu-led.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/via-pmu-led.c
+++ linux-2.6/drivers/macintosh/via-pmu-led.c
@@ -120,7 +120,7 @@ static int __init via_pmu_led_init(void)
dt = of_find_node_by_path("/");
if (dt == NULL)
return -ENODEV;
- model = (const char *)get_property(dt, "model", NULL);
+ model = get_property(dt, "model", NULL);
if (model == NULL)
return -ENODEV;
if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 &&
Index: linux-2.6/drivers/macintosh/via-pmu.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/via-pmu.c
+++ linux-2.6/drivers/macintosh/via-pmu.c
@@ -287,7 +287,7 @@ static char *pbook_type[] = {
int __init find_via_pmu(void)
{
u64 taddr;
- u32 *reg;
+ const u32 *reg;
if (via != 0)
return 1;
@@ -295,7 +295,7 @@ int __init find_via_pmu(void)
if (vias == NULL)
return 0;
- reg = (u32 *)get_property(vias, "reg", NULL);
+ reg = get_property(vias, "reg", NULL);
if (reg == NULL) {
printk(KERN_ERR "via-pmu: No \"reg\" property !\n");
goto fail;
@@ -337,7 +337,7 @@ int __init find_via_pmu(void)
gpiop = of_find_node_by_name(NULL, "gpio");
if (gpiop) {
- reg = (u32 *)get_property(gpiop, "reg", NULL);
+ reg = get_property(gpiop, "reg", NULL);
if (reg)
gaddr = of_translate_address(gpiop, reg);
if (gaddr != OF_BAD_ADDR)
@@ -486,9 +486,9 @@ static int __init via_pmu_dev_init(void)
pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
} else {
struct device_node* prim = find_devices("power-mgt");
- u32 *prim_info = NULL;
+ const u32 *prim_info = NULL;
if (prim)
- prim_info = (u32 *)get_property(prim, "prim-info", NULL);
+ prim_info = get_property(prim, "prim-info", NULL);
if (prim_info) {
/* Other stuffs here yet unknown */
pmu_battery_count = (prim_info[6] >> 16) & 0xff;
Index: linux-2.6/drivers/macintosh/windfarm_smu_controls.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/windfarm_smu_controls.c
+++ linux-2.6/drivers/macintosh/windfarm_smu_controls.c
@@ -159,14 +159,15 @@ static struct smu_fan_control *smu_fan_c
int pwm_fan)
{
struct smu_fan_control *fct;
- s32 *v; u32 *reg;
- char *l;
+ const s32 *v;
+ const u32 *reg;
+ const char *l;
fct = kmalloc(sizeof(struct smu_fan_control), GFP_KERNEL);
if (fct == NULL)
return NULL;
fct->ctrl.ops = &smu_fan_ops;
- l = (char *)get_property(node, "location", NULL);
+ l = get_property(node, "location", NULL);
if (l == NULL)
goto fail;
@@ -223,17 +224,17 @@ static struct smu_fan_control *smu_fan_c
goto fail;
/* Get min & max values*/
- v = (s32 *)get_property(node, "min-value", NULL);
+ v = get_property(node, "min-value", NULL);
if (v == NULL)
goto fail;
fct->min = *v;
- v = (s32 *)get_property(node, "max-value", NULL);
+ v = get_property(node, "max-value", NULL);
if (v == NULL)
goto fail;
fct->max = *v;
/* Get "reg" value */
- reg = (u32 *)get_property(node, "reg", NULL);
+ reg = get_property(node, "reg", NULL);
if (reg == NULL)
goto fail;
fct->reg = *reg;
Index: linux-2.6/drivers/macintosh/windfarm_smu_sat.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/windfarm_smu_sat.c
+++ linux-2.6/drivers/macintosh/windfarm_smu_sat.c
@@ -233,15 +233,15 @@ static void wf_sat_create(struct i2c_ada
{
struct wf_sat *sat;
struct wf_sat_sensor *sens;
- u32 *reg;
- char *loc, *type;
+ const u32 *reg;
+ const char *loc, *type;
u8 addr, chip, core;
struct device_node *child;
int shift, cpu, index;
char *name;
int vsens[2], isens[2];
- reg = (u32 *) get_property(dev, "reg", NULL);
+ reg = get_property(dev, "reg", NULL);
if (reg == NULL)
return;
addr = *reg;
@@ -268,7 +268,7 @@ static void wf_sat_create(struct i2c_ada
isens[0] = isens[1] = -1;
child = NULL;
while ((child = of_get_next_child(dev, child)) != NULL) {
- reg = (u32 *) get_property(child, "reg", NULL);
+ reg = get_property(child, "reg", NULL);
type = get_property(child, "device_type", NULL);
loc = get_property(child, "location", NULL);
if (reg == NULL || loc == NULL)
Index: linux-2.6/drivers/macintosh/windfarm_smu_sensors.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/windfarm_smu_sensors.c
+++ linux-2.6/drivers/macintosh/windfarm_smu_sensors.c
@@ -198,14 +198,14 @@ static struct wf_sensor_ops smu_slotspow
static struct smu_ad_sensor *smu_ads_create(struct device_node *node)
{
struct smu_ad_sensor *ads;
- char *c, *l;
- u32 *v;
+ const char *c, *l;
+ const u32 *v;
ads = kmalloc(sizeof(struct smu_ad_sensor), GFP_KERNEL);
if (ads == NULL)
return NULL;
- c = (char *)get_property(node, "device_type", NULL);
- l = (char *)get_property(node, "location", NULL);
+ c = get_property(node, "device_type", NULL);
+ l = get_property(node, "location", NULL);
if (c == NULL || l == NULL)
goto fail;
@@ -255,7 +255,7 @@ static struct smu_ad_sensor *smu_ads_cre
} else
goto fail;
- v = (u32 *)get_property(node, "reg", NULL);
+ v = get_property(node, "reg", NULL);
if (v == NULL)
goto fail;
ads->reg = *v;
@@ -382,7 +382,7 @@ smu_cpu_power_create(struct wf_sensor *v
static void smu_fetch_param_partitions(void)
{
- struct smu_sdbp_header *hdr;
+ const struct smu_sdbp_header *hdr;
/* Get CPU voltage/current/power calibration data */
hdr = smu_get_sdb_partition(SMU_SDB_CPUVCP_ID, NULL);
Index: linux-2.6/drivers/macintosh/windfarm_pm81.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/windfarm_pm81.c
+++ linux-2.6/drivers/macintosh/windfarm_pm81.c
@@ -396,7 +396,7 @@ static void wf_smu_sys_fans_tick(struct
static void wf_smu_create_cpu_fans(void)
{
struct wf_cpu_pid_param pid_param;
- struct smu_sdbp_header *hdr;
+ const struct smu_sdbp_header *hdr;
struct smu_sdbp_cpupiddata *piddata;
struct smu_sdbp_fvt *fvt;
s32 tmax, tdelta, maxpow, powadj;
@@ -702,7 +702,7 @@ static struct notifier_block wf_smu_even
static int wf_init_pm(void)
{
- struct smu_sdbp_header *hdr;
+ const struct smu_sdbp_header *hdr;
hdr = smu_get_sdb_partition(SMU_SDB_SENSORTREE_ID, NULL);
if (hdr != 0) {
Index: linux-2.6/drivers/macintosh/windfarm_pm91.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/windfarm_pm91.c
+++ linux-2.6/drivers/macintosh/windfarm_pm91.c
@@ -144,7 +144,7 @@ static struct wf_smu_slots_fans_state *w
static void wf_smu_create_cpu_fans(void)
{
struct wf_cpu_pid_param pid_param;
- struct smu_sdbp_header *hdr;
+ const struct smu_sdbp_header *hdr;
struct smu_sdbp_cpupiddata *piddata;
struct smu_sdbp_fvt *fvt;
s32 tmax, tdelta, maxpow, powadj;
Index: linux-2.6/include/asm-powerpc/smu.h
===================================================================
--- linux-2.6.orig/include/asm-powerpc/smu.h
+++ linux-2.6/include/asm-powerpc/smu.h
@@ -517,7 +517,7 @@ struct smu_sdbp_cpupiddata {
* This returns the pointer to an SMU "sdb" partition data or NULL
* if not found. The data format is described below
*/
-extern struct smu_sdbp_header *smu_get_sdb_partition(int id,
+extern const struct smu_sdbp_header *smu_get_sdb_partition(int id,
unsigned int *size);
/* Get "sdb" partition data from an SMU satellite */
Index: linux-2.6/drivers/macintosh/macio_sysfs.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/macio_sysfs.c
+++ linux-2.6/drivers/macintosh/macio_sysfs.c
@@ -16,12 +16,12 @@ static ssize_t
compatible_show (struct device *dev, struct device_attribute *attr, char *buf)
{
struct of_device *of;
- char *compat;
+ const char *compat;
int cplen;
int length = 0;
of = &to_macio_device (dev)->ofdev;
- compat = (char *) get_property(of->node, "compatible", &cplen);
+ compat = get_property(of->node, "compatible", &cplen);
if (!compat) {
*buf = '\0';
return 0;
@@ -42,12 +42,12 @@ static ssize_t modalias_show (struct dev
char *buf)
{
struct of_device *of;
- char *compat;
+ const char *compat;
int cplen;
int length;
of = &to_macio_device (dev)->ofdev;
- compat = (char *) get_property (of->node, "compatible", &cplen);
+ compat = get_property(of->node, "compatible", &cplen);
if (!compat) compat = "", cplen = 1;
length = sprintf (buf, "of:N%sT%s", of->node->name, of->node->type);
buf += length;
Index: linux-2.6/drivers/macintosh/therm_windtunnel.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/therm_windtunnel.c
+++ linux-2.6/drivers/macintosh/therm_windtunnel.c
@@ -484,14 +484,14 @@ struct apple_thermal_info {
static int __init
g4fan_init( void )
{
- struct apple_thermal_info *info;
+ const struct apple_thermal_info *info;
struct device_node *np;
init_MUTEX( &x.lock );
if( !(np=of_find_node_by_name(NULL, "power-mgt")) )
return -ENODEV;
- info = (struct apple_thermal_info*)get_property(np, "thermal-info", NULL);
+ info = get_property(np, "thermal-info", NULL);
of_node_put(np);
if( !info || !machine_is_compatible("PowerMac3,6") )
Index: linux-2.6/drivers/i2c/busses/i2c-powermac.c
===================================================================
--- linux-2.6.orig/drivers/i2c/busses/i2c-powermac.c
+++ linux-2.6/drivers/i2c/busses/i2c-powermac.c
@@ -209,7 +209,8 @@ static int i2c_powermac_probe(struct dev
struct pmac_i2c_bus *bus = dev->platform_data;
struct device_node *parent = NULL;
struct i2c_adapter *adapter;
- char name[32], *basename;
+ char name[32];
+ const char *basename;
int rc;
if (bus == NULL)
Index: linux-2.6/drivers/ide/ppc/pmac.c
===================================================================
--- linux-2.6.orig/drivers/ide/ppc/pmac.c
+++ linux-2.6/drivers/ide/ppc/pmac.c
@@ -1154,7 +1154,7 @@ static int
pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
{
struct device_node *np = pmif->node;
- int *bidp;
+ const int *bidp;
pmif->cable_80 = 0;
pmif->broken_dma = pmif->broken_dma_warn = 0;
@@ -1176,14 +1176,14 @@ pmac_ide_setup_device(pmac_ide_hwif_t *p
pmif->broken_dma = 1;
}
- bidp = (int *)get_property(np, "AAPL,bus-id", NULL);
+ bidp = get_property(np, "AAPL,bus-id", NULL);
pmif->aapl_bus_id = bidp ? *bidp : 0;
/* Get cable type from device-tree */
if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6
|| pmif->kind == controller_k2_ata6
|| pmif->kind == controller_sh_ata6) {
- char* cable = get_property(np, "cable-type", NULL);
+ const char* cable = get_property(np, "cable-type", NULL);
if (cable && !strncmp(cable, "80-", 3))
pmif->cable_80 = 1;
}
Index: linux-2.6/drivers/serial/pmac_zilog.c
===================================================================
--- linux-2.6.orig/drivers/serial/pmac_zilog.c
+++ linux-2.6/drivers/serial/pmac_zilog.c
@@ -1400,8 +1400,8 @@ static struct uart_ops pmz_pops = {
static int __init pmz_init_port(struct uart_pmac_port *uap)
{
struct device_node *np = uap->node;
- char *conn;
- struct slot_names_prop {
+ const char *conn;
+ const struct slot_names_prop {
int count;
char name[1];
} *slots;
@@ -1458,7 +1458,7 @@ no_dma:
uap->flags |= PMACZILOG_FLAG_IS_IRDA;
uap->port_type = PMAC_SCC_ASYNC;
/* 1999 Powerbook G3 has slot-names property instead */
- slots = (struct slot_names_prop *)get_property(np, "slot-names", &len);
+ slots = get_property(np, "slot-names", &len);
if (slots && slots->count > 0) {
if (strcmp(slots->name, "IrDA") == 0)
uap->flags |= PMACZILOG_FLAG_IS_IRDA;
@@ -1470,7 +1470,8 @@ no_dma:
if (ZS_IS_INTMODEM(uap)) {
struct device_node* i2c_modem = find_devices("i2c-modem");
if (i2c_modem) {
- char* mid = get_property(i2c_modem, "modem-id", NULL);
+ const char* mid =
+ get_property(i2c_modem, "modem-id", NULL);
if (mid) switch(*mid) {
case 0x04 :
case 0x05 :
More information about the Linuxppc-dev
mailing list