[PATCH] Initial MPC8540 ADS port with OF Flat Dev
Jon Loeliger
jdl at freescale.com
Sat Jan 14 10:28:59 EST 2006
Initial support for MPC8540 ADS with Flat Device tree.
Does not yet include PCI or I2C.
Signed-off-by: Jon Loeliger <jdl at freescale.com>
Signed-off-by: Becky Bruce <becky.bruce at freescale.com>
--
arch/powerpc/Kconfig | 23 +
arch/powerpc/configs/mpc8540_ads_defconfig | 723 ++++++++++++++++++++++++++++
arch/powerpc/kernel/head_booke.h | 363 ++++++++++++++
arch/powerpc/platforms/85xx/Kconfig | 74 ---
arch/powerpc/platforms/85xx/Makefile | 5
arch/powerpc/platforms/85xx/mpc8540_ads.h | 67 +++
arch/powerpc/platforms/85xx/mpc85xx.c | 257 ++++++++++
arch/powerpc/platforms/Makefile | 2
8 files changed, 1441 insertions(+), 73 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a8d2f2d..898047d 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -138,6 +138,12 @@ config PPC_83xx
select 83xx
select PPC_FPU
+config PPC_85xx
+ bool "Freescale 85xx"
+ select E500
+ select FSL_SOC
+ select 85xx
+
config 40x
bool "AMCC 40x"
@@ -150,8 +156,6 @@ config 8xx
config E200
bool "Freescale e200"
-config E500
- bool "Freescale e500"
endchoice
config POWER4_ONLY
@@ -179,6 +183,12 @@ config 6xx
config 83xx
bool
+config 85xx
+ bool
+
+config E500
+ bool
+
config PPC_FPU
bool
default y if PPC64
@@ -228,6 +238,7 @@ config ALTIVEC
config SPE
bool "SPE Support"
depends on E200 || E500
+ default y
---help---
This option enables kernel support for the Signal Processing
Extensions (SPE) to the PowerPC processor. The kernel currently
@@ -735,13 +746,13 @@ config GENERIC_ISA_DMA
config PPC_I8259
bool
- default y if 85xx
+ default y if PPC_85xx
default n
config PPC_INDIRECT_PCI
bool
depends on PCI
- default y if 40x || 44x || 85xx
+ default y if 40x || 44x || PPC_85xx
default n
config EISA
@@ -758,8 +769,8 @@ config MCA
bool
config PCI
- bool "PCI support" if 40x || CPM2 || PPC_83xx || 85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES)
- default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !85xx
+ bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES)
+ default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
default PCI_QSPAN if !4xx && !CPM2 && 8xx
help
diff --git a/arch/powerpc/configs/mpc8540_ads_defconfig b/arch/powerpc/configs/mpc8540_ads_defconfig
new file mode 100644
index 0000000..b7489f8
--- /dev/null
+++ b/arch/powerpc/configs/mpc8540_ads_defconfig
@@ -0,0 +1,723 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-g2554f1e1-dirty
+# Thu Jan 12 16:29:46 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_DEFAULT_UIMAGE=y
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_85xx=y
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_MPIC=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Platform support
+#
+CONFIG_MPC8540_ADS=y
+CONFIG_MPC8540=y
+CONFIG_PPC_INDIRECT_PCI_BE=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_MATH_EMULATION=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_PPC_I8259=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+
+#
+# Ethernet (1000 Mbit)
+#
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
new file mode 100644
index 0000000..5827c27
--- /dev/null
+++ b/arch/powerpc/kernel/head_booke.h
@@ -0,0 +1,363 @@
+#ifndef __HEAD_BOOKE_H__
+#define __HEAD_BOOKE_H__
+
+/*
+ * Macros used for common Book-e exception handling
+ */
+
+#define SET_IVOR(vector_number, vector_label) \
+ li r26,vector_label at l; \
+ mtspr SPRN_IVOR##vector_number,r26; \
+ sync
+
+#define NORMAL_EXCEPTION_PROLOG \
+ mtspr SPRN_SPRG0,r10; /* save two registers to work with */\
+ mtspr SPRN_SPRG1,r11; \
+ mtspr SPRN_SPRG4W,r1; \
+ mfcr r10; /* save CR in r10 for now */\
+ mfspr r11,SPRN_SRR1; /* check whether user or kernel */\
+ andi. r11,r11,MSR_PR; \
+ beq 1f; \
+ mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\
+ lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
+ addi r1,r1,THREAD_SIZE; \
+1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
+ mr r11,r1; \
+ stw r10,_CCR(r11); /* save various registers */\
+ stw r12,GPR12(r11); \
+ stw r9,GPR9(r11); \
+ mfspr r10,SPRN_SPRG0; \
+ stw r10,GPR10(r11); \
+ mfspr r12,SPRN_SPRG1; \
+ stw r12,GPR11(r11); \
+ mflr r10; \
+ stw r10,_LINK(r11); \
+ mfspr r10,SPRN_SPRG4R; \
+ mfspr r12,SPRN_SRR0; \
+ stw r10,GPR1(r11); \
+ mfspr r9,SPRN_SRR1; \
+ stw r10,0(r11); \
+ rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
+ stw r0,GPR0(r11); \
+ SAVE_4GPRS(3, r11); \
+ SAVE_2GPRS(7, r11)
+
+/* To handle the additional exception priority levels on 40x and Book-E
+ * processors we allocate a 4k stack per additional priority level. The various
+ * head_xxx.S files allocate space (exception_stack_top) for each priority's
+ * stack times the number of CPUs
+ *
+ * On 40x critical is the only additional level
+ * On 44x/e500 we have critical and machine check
+ * On e200 we have critical and debug (machine check occurs via critical)
+ *
+ * Additionally we reserve a SPRG for each priority level so we can free up a
+ * GPR to use as the base for indirect access to the exception stacks. This
+ * is necessary since the MMU is always on, for Book-E parts, and the stacks
+ * are offset from KERNELBASE.
+ *
+ */
+#define BOOKE_EXCEPTION_STACK_SIZE (8192)
+
+/* CRIT_SPRG only used in critical exception handling */
+#define CRIT_SPRG SPRN_SPRG2
+/* MCHECK_SPRG only used in machine check exception handling */
+#define MCHECK_SPRG SPRN_SPRG6W
+
+#define MCHECK_STACK_TOP (exception_stack_top - 4096)
+#define CRIT_STACK_TOP (exception_stack_top)
+
+/* only on e200 for now */
+#define DEBUG_STACK_TOP (exception_stack_top - 4096)
+#define DEBUG_SPRG SPRN_SPRG6W
+
+#ifdef CONFIG_SMP
+#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
+ mfspr r8,SPRN_PIR; \
+ mulli r8,r8,BOOKE_EXCEPTION_STACK_SIZE; \
+ neg r8,r8; \
+ addis r8,r8,level##_STACK_TOP at ha; \
+ addi r8,r8,level##_STACK_TOP at l
+#else
+#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
+ lis r8,level##_STACK_TOP at h; \
+ ori r8,r8,level##_STACK_TOP at l
+#endif
+
+/*
+ * Exception prolog for critical/machine check exceptions. This is a
+ * little different from the normal exception prolog above since a
+ * critical/machine check exception can potentially occur at any point
+ * during normal exception processing. Thus we cannot use the same SPRG
+ * registers as the normal prolog above. Instead we use a portion of the
+ * critical/machine check exception stack at low physical addresses.
+ */
+#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \
+ mtspr exc_level##_SPRG,r8; \
+ BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
+ stw r10,GPR10-INT_FRAME_SIZE(r8); \
+ stw r11,GPR11-INT_FRAME_SIZE(r8); \
+ mfcr r10; /* save CR in r10 for now */\
+ mfspr r11,exc_level_srr1; /* check whether user or kernel */\
+ andi. r11,r11,MSR_PR; \
+ mr r11,r8; \
+ mfspr r8,exc_level##_SPRG; \
+ beq 1f; \
+ /* COMING FROM USER MODE */ \
+ mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\
+ lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
+ addi r11,r11,THREAD_SIZE; \
+1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\
+ stw r10,_CCR(r11); /* save various registers */\
+ stw r12,GPR12(r11); \
+ stw r9,GPR9(r11); \
+ mflr r10; \
+ stw r10,_LINK(r11); \
+ mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
+ stw r12,_DEAR(r11); /* since they may have had stuff */\
+ mfspr r9,SPRN_ESR; /* in them at the point where the */\
+ stw r9,_ESR(r11); /* exception was taken */\
+ mfspr r12,exc_level_srr0; \
+ stw r1,GPR1(r11); \
+ mfspr r9,exc_level_srr1; \
+ stw r1,0(r11); \
+ mr r1,r11; \
+ rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
+ stw r0,GPR0(r11); \
+ SAVE_4GPRS(3, r11); \
+ SAVE_2GPRS(7, r11)
+
+#define CRITICAL_EXCEPTION_PROLOG \
+ EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1)
+#define DEBUG_EXCEPTION_PROLOG \
+ EXC_LEVEL_EXCEPTION_PROLOG(DEBUG, SPRN_DSRR0, SPRN_DSRR1)
+#define MCHECK_EXCEPTION_PROLOG \
+ EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1)
+
+/*
+ * Exception vectors.
+ */
+#define START_EXCEPTION(label) \
+ .align 5; \
+label:
+
+#define FINISH_EXCEPTION(func) \
+ bl transfer_to_handler_full; \
+ .long func; \
+ .long ret_from_except_full
+
+#define EXCEPTION(n, label, hdlr, xfer) \
+ START_EXCEPTION(label); \
+ NORMAL_EXCEPTION_PROLOG; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ xfer(n, hdlr)
+
+#define CRITICAL_EXCEPTION(n, label, hdlr) \
+ START_EXCEPTION(label); \
+ CRITICAL_EXCEPTION_PROLOG; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+ NOCOPY, crit_transfer_to_handler, \
+ ret_from_crit_exc)
+
+#define MCHECK_EXCEPTION(n, label, hdlr) \
+ START_EXCEPTION(label); \
+ MCHECK_EXCEPTION_PROLOG; \
+ mfspr r5,SPRN_ESR; \
+ stw r5,_ESR(r11); \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+ NOCOPY, mcheck_transfer_to_handler, \
+ ret_from_mcheck_exc)
+
+#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \
+ li r10,trap; \
+ stw r10,_TRAP(r11); \
+ lis r10,msr at h; \
+ ori r10,r10,msr at l; \
+ copyee(r10, r9); \
+ bl tfer; \
+ .long hdlr; \
+ .long ret
+
+#define COPY_EE(d, s) rlwimi d,s,0,16,16
+#define NOCOPY(d, s)
+
+#define EXC_XFER_STD(n, hdlr) \
+ EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
+ ret_from_except_full)
+
+#define EXC_XFER_LITE(n, hdlr) \
+ EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
+ ret_from_except)
+
+#define EXC_XFER_EE(n, hdlr) \
+ EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
+ ret_from_except_full)
+
+#define EXC_XFER_EE_LITE(n, hdlr) \
+ EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
+ ret_from_except)
+
+/* Check for a single step debug exception while in an exception
+ * handler before state has been saved. This is to catch the case
+ * where an instruction that we are trying to single step causes
+ * an exception (eg ITLB/DTLB miss) and thus the first instruction of
+ * the exception handler generates a single step debug exception.
+ *
+ * If we get a debug trap on the first instruction of an exception handler,
+ * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
+ * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
+ * The exception handler was handling a non-critical interrupt, so it will
+ * save (and later restore) the MSR via SPRN_CSRR1, which will still have
+ * the MSR_DE bit set.
+ */
+#ifdef CONFIG_E200
+#define DEBUG_EXCEPTION \
+ START_EXCEPTION(Debug); \
+ DEBUG_EXCEPTION_PROLOG; \
+ \
+ /* \
+ * If there is a single step or branch-taken exception in an \
+ * exception entry sequence, it was probably meant to apply to \
+ * the code where the exception occurred (since exception entry \
+ * doesn't turn off DE automatically). We simulate the effect \
+ * of turning off DE on entry to an exception handler by turning \
+ * off DE in the CSRR1 value and clearing the debug status. \
+ */ \
+ mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
+ andis. r10,r10,DBSR_IC at h; \
+ beq+ 2f; \
+ \
+ lis r10,KERNELBASE at h; /* check if exception in vectors */ \
+ ori r10,r10,KERNELBASE at l; \
+ cmplw r12,r10; \
+ blt+ 2f; /* addr below exception vectors */ \
+ \
+ lis r10,Debug at h; \
+ ori r10,r10,Debug at l; \
+ cmplw r12,r10; \
+ bgt+ 2f; /* addr above exception vectors */ \
+ \
+ /* here it looks like we got an inappropriate debug exception. */ \
+1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \
+ lis r10,DBSR_IC at h; /* clear the IC event */ \
+ mtspr SPRN_DBSR,r10; \
+ /* restore state and get out */ \
+ lwz r10,_CCR(r11); \
+ lwz r0,GPR0(r11); \
+ lwz r1,GPR1(r11); \
+ mtcrf 0x80,r10; \
+ mtspr SPRN_DSRR0,r12; \
+ mtspr SPRN_DSRR1,r9; \
+ lwz r9,GPR9(r11); \
+ lwz r12,GPR12(r11); \
+ mtspr DEBUG_SPRG,r8; \
+ BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \
+ lwz r10,GPR10-INT_FRAME_SIZE(r8); \
+ lwz r11,GPR11-INT_FRAME_SIZE(r8); \
+ mfspr r8,DEBUG_SPRG; \
+ \
+ RFDI; \
+ b .; \
+ \
+ /* continue normal handling for a critical exception... */ \
+2: mfspr r4,SPRN_DBSR; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
+#else
+#define DEBUG_EXCEPTION \
+ START_EXCEPTION(Debug); \
+ CRITICAL_EXCEPTION_PROLOG; \
+ \
+ /* \
+ * If there is a single step or branch-taken exception in an \
+ * exception entry sequence, it was probably meant to apply to \
+ * the code where the exception occurred (since exception entry \
+ * doesn't turn off DE automatically). We simulate the effect \
+ * of turning off DE on entry to an exception handler by turning \
+ * off DE in the CSRR1 value and clearing the debug status. \
+ */ \
+ mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
+ andis. r10,r10,DBSR_IC at h; \
+ beq+ 2f; \
+ \
+ lis r10,KERNELBASE at h; /* check if exception in vectors */ \
+ ori r10,r10,KERNELBASE at l; \
+ cmplw r12,r10; \
+ blt+ 2f; /* addr below exception vectors */ \
+ \
+ lis r10,Debug at h; \
+ ori r10,r10,Debug at l; \
+ cmplw r12,r10; \
+ bgt+ 2f; /* addr above exception vectors */ \
+ \
+ /* here it looks like we got an inappropriate debug exception. */ \
+1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CSRR1 value */ \
+ lis r10,DBSR_IC at h; /* clear the IC event */ \
+ mtspr SPRN_DBSR,r10; \
+ /* restore state and get out */ \
+ lwz r10,_CCR(r11); \
+ lwz r0,GPR0(r11); \
+ lwz r1,GPR1(r11); \
+ mtcrf 0x80,r10; \
+ mtspr SPRN_CSRR0,r12; \
+ mtspr SPRN_CSRR1,r9; \
+ lwz r9,GPR9(r11); \
+ lwz r12,GPR12(r11); \
+ mtspr CRIT_SPRG,r8; \
+ BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \
+ lwz r10,GPR10-INT_FRAME_SIZE(r8); \
+ lwz r11,GPR11-INT_FRAME_SIZE(r8); \
+ mfspr r8,CRIT_SPRG; \
+ \
+ rfci; \
+ b .; \
+ \
+ /* continue normal handling for a critical exception... */ \
+2: mfspr r4,SPRN_DBSR; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
+#endif
+
+#define INSTRUCTION_STORAGE_EXCEPTION \
+ START_EXCEPTION(InstructionStorage) \
+ NORMAL_EXCEPTION_PROLOG; \
+ mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \
+ stw r5,_ESR(r11); \
+ mr r4,r12; /* Pass SRR0 as arg2 */ \
+ li r5,0; /* Pass zero as arg3 */ \
+ EXC_XFER_EE_LITE(0x0400, handle_page_fault)
+
+#define ALIGNMENT_EXCEPTION \
+ START_EXCEPTION(Alignment) \
+ NORMAL_EXCEPTION_PROLOG; \
+ mfspr r4,SPRN_DEAR; /* Grab the DEAR and save it */ \
+ stw r4,_DEAR(r11); \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ EXC_XFER_EE(0x0600, alignment_exception)
+
+#define PROGRAM_EXCEPTION \
+ START_EXCEPTION(Program) \
+ NORMAL_EXCEPTION_PROLOG; \
+ mfspr r4,SPRN_ESR; /* Grab the ESR and save it */ \
+ stw r4,_ESR(r11); \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ EXC_XFER_STD(0x0700, program_check_exception)
+
+#define DECREMENTER_EXCEPTION \
+ START_EXCEPTION(Decrementer) \
+ NORMAL_EXCEPTION_PROLOG; \
+ lis r0,TSR_DIS at h; /* Setup the DEC interrupt mask */ \
+ mtspr SPRN_TSR,r0; /* Clear the DEC interrupt */ \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ EXC_XFER_LITE(0x0900, timer_interrupt)
+
+#define FP_UNAVAILABLE_EXCEPTION \
+ START_EXCEPTION(FloatingPointUnavailable) \
+ NORMAL_EXCEPTION_PROLOG; \
+ bne load_up_fpu; /* if from user, just load it up */ \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ EXC_XFER_EE_LITE(0x800, KernelFP)
+
+#endif /* __HEAD_BOOKE_H__ */
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index c5bc282..d3d0ff7 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -1,86 +1,30 @@
-config 85xx
- bool
- depends on E500
- default y
-
-config PPC_INDIRECT_PCI_BE
- bool
- depends on 85xx
- default y
-
-menu "Freescale 85xx options"
- depends on E500
+menu "Platform support"
+ depends on PPC_85xx
choice
prompt "Machine Type"
- depends on 85xx
default MPC8540_ADS
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
help
- This option enables support for the MPC 8540 ADS evaluation board.
-
-config MPC8548_CDS
- bool "Freescale MPC8548 CDS"
- help
- This option enablese support for the MPC8548 CDS evaluation board.
-
-config MPC8555_CDS
- bool "Freescale MPC8555 CDS"
- help
- This option enablese support for the MPC8555 CDS evaluation board.
-
-config MPC8560_ADS
- bool "Freescale MPC8560 ADS"
- help
- This option enables support for the MPC 8560 ADS evaluation board.
-
-config SBC8560
- bool "WindRiver PowerQUICC III SBC8560"
- help
- This option enables support for the WindRiver PowerQUICC III
- SBC8560 board.
-
-config STX_GP3
- bool "Silicon Turnkey Express GP3"
- help
- This option enables support for the Silicon Turnkey Express GP3
- board.
+ This option enables support for the MPC 8540 ADS board
endchoice
-# It's often necessary to know the specific 85xx processor type.
-# Fortunately, it is implied (so far) from the board type, so we
-# don't need to ask more redundant questions.
config MPC8540
bool
- depends on MPC8540_ADS
- default y
-
-config MPC8548
- bool
- depends on MPC8548_CDS
- default y
+ select PPC_UDBG_16550
+ select PPC_INDIRECT_PCI
+ default y if MPC8540_ADS
-config MPC8555
- bool
- depends on MPC8555_CDS
- default y
-
-config MPC8560
+config PPC_INDIRECT_PCI_BE
bool
- depends on SBC8560 || MPC8560_ADS || STX_GP3
- default y
-
-config 85xx_PCI2
- bool "Supprt for 2nd PCI host controller"
- depends on MPC8555_CDS
+ depends on PPC_85xx
default y
-config PPC_GEN550
+config MPIC
bool
- depends on MPC8540 || SBC8560 || MPC8555
default y
endmenu
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 6407197..a9f3b36 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -1 +1,4 @@
-# empty makefile so make clean works
+#
+# Makefile for the PowerPC 85xx linux kernel.
+#
+obj-$(CONFIG_PPC_85xx) += mpc85xx.o
diff --git a/arch/powerpc/platforms/85xx/mpc8540_ads.h b/arch/powerpc/platforms/85xx/mpc8540_ads.h
new file mode 100644
index 0000000..c665efc
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc8540_ads.h
@@ -0,0 +1,67 @@
+/*
+ * arch/ppc/platforms/85xx/mpc8540_ads.h
+ *
+ * MPC8540ADS board definitions
+ *
+ * Maintainer: Kumar Gala <kumar.gala at freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC8540ADS_H__
+#define __MACH_MPC8540ADS_H__
+
+#include <linux/config.h>
+#include <linux/initrd.h>
+
+#define BOARD_CCSRBAR ((uint)0xe0000000)
+#define BCSR_ADDR ((uint)0xf8000000)
+#define BCSR_SIZE ((uint)(32 * 1024))
+
+/* PCI interrupt controller */
+#define PIRQA MPC85xx_IRQ_EXT1
+#define PIRQB MPC85xx_IRQ_EXT2
+#define PIRQC MPC85xx_IRQ_EXT3
+#define PIRQD MPC85xx_IRQ_EXT4
+
+#define MPC85XX_PCI1_LOWER_IO 0x00000000
+#define MPC85XX_PCI1_UPPER_IO 0x00ffffff
+
+#define MPC85XX_PCI1_LOWER_MEM 0x80000000
+#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff
+
+#define MPC85XX_PCI1_IO_BASE 0xe2000000
+#define MPC85XX_PCI1_MEM_OFFSET 0x00000000
+
+#define MPC85XX_PCI1_IO_SIZE 0x01000000
+
+/* PCI config */
+#define PCI1_CFG_ADDR_OFFSET (0x8000)
+#define PCI1_CFG_DATA_OFFSET (0x8004)
+
+#define PCI2_CFG_ADDR_OFFSET (0x9000)
+#define PCI2_CFG_DATA_OFFSET (0x9004)
+
+/* Additional register for PCI-X configuration */
+#define PCIX_NEXT_CAP 0x60
+#define PCIX_CAP_ID 0x61
+#define PCIX_COMMAND 0x62
+#define PCIX_STATUS 0x64
+
+/* Serial Config */
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define RS_TABLE_SIZE 64
+#else
+#define RS_TABLE_SIZE 2
+#endif
+
+/* Offset of CPM register space */
+#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET)
+
+#endif /* __MACH_MPC8540ADS_H__ */
diff --git a/arch/powerpc/platforms/85xx/mpc85xx.c b/arch/powerpc/platforms/85xx/mpc85xx.c
new file mode 100644
index 0000000..417f496
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc85xx.c
@@ -0,0 +1,257 @@
+/*
+ * MPC85xx setup and early boot code plus other random bits.
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/tty.h> /* for linux/serial_core.h */
+#include <linux/serial_core.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+#include <linux/fsl_devices.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <asm/irq.h>
+#include <asm/immap_85xx.h>
+#include <asm/prom.h>
+#include <asm/mpic.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+extern unsigned long total_memory; /* in mm/init */
+
+extern void abort(void);
+
+extern void gen550_progress(char *, unsigned short);
+extern void gen550_init(int, struct uart_port *);
+extern phys_addr_t get_immrbase(void);
+extern void find_legacy_serial_ports(void);
+
+void mpc85xx_ads_show_cpuinfo(struct seq_file *m);
+void mpc85xx_restart(char *cmd);
+void mpc85xx_halt(void);
+void mpc85xx_power_off(void);
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+phys_addr_t immr_base;
+
+
+/*
+ * Internal interrupts are all Level Sensitive, and Positive Polarity
+ *
+ * Note: Likely, this table and the following function should be
+ * obtained and derived from the OF Device Tree.
+ */
+static u_char mpc85xx_ads_openpic_initsenses[] __initdata = {
+ MPC85XX_INTERNAL_IRQ_SENSES,
+ 0x0, /* External 0: */
+#if defined(CONFIG_PCI)
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 4: PCI slot 3 */
+#else
+ 0x0, /* External 1: */
+ 0x0, /* External 2: */
+ 0x0, /* External 3: */
+ 0x0, /* External 4: */
+#endif
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
+ 0x0, /* External 6: */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */
+ 0x0, /* External 8: */
+ 0x0, /* External 9: */
+ 0x0, /* External 10: */
+ 0x0, /* External 11: */
+};
+
+
+void __init mpc85xx_pic_init(void)
+{
+ struct mpic *mpic1;
+ /* Determine the Physical Address of the OpenPIC regs */
+ phys_addr_t OpenPIC_PAddr = immr_base + MPC85xx_OPENPIC_OFFSET;
+
+ mpic1 = mpic_alloc(OpenPIC_PAddr,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250,
+ mpc85xx_ads_openpic_initsenses,
+ sizeof(mpc85xx_ads_openpic_initsenses), " OpenPIC ");
+ BUG_ON(mpic1 == NULL);
+ mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
+ mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280);
+ mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300);
+ mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380);
+ mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400);
+ mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480);
+ mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500);
+ mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580);
+
+ /* dummy mappings to get to 48 */
+ mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600);
+ mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680);
+ mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700);
+ mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780);
+
+ /* External ints */
+ mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000);
+ mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080);
+ mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100);
+ mpic_init(mpic1);
+}
+
+
+/*
+ * Setup the architecture
+ */
+
+static void __init
+mpc85xx_setup_arch(void)
+{
+ struct device_node *cpu;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc85xx_setup_arch()", 0);
+
+ cpu = of_find_node_by_type(NULL, "cpu");
+ if (cpu != 0) {
+ unsigned int *fp;
+
+ fp = (int *)get_property(cpu, "clock-frequency", NULL);
+ if (fp != 0)
+ loops_per_jiffy = *fp / HZ;
+ else
+ loops_per_jiffy = 50000000 / HZ;
+ of_node_put(cpu);
+ }
+
+ immr_base = get_immrbase();
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+ /*
+ * Invalidate the entry we stole earlier.
+ * The serial ports should be properly mapped.
+ */
+ invalidate_tlbcam_entry(num_tlbcam_entries - 1);
+#endif
+
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+}
+
+
+void __init
+platform_init(void)
+{
+ ppc_md.setup_arch = mpc85xx_setup_arch;
+ ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo;
+
+ ppc_md.init_IRQ = mpc85xx_pic_init;
+ ppc_md.get_irq = mpic_get_irq;
+
+ ppc_md.restart = mpc85xx_restart;
+ ppc_md.power_off = mpc85xx_power_off;
+ ppc_md.halt = mpc85xx_halt;
+
+ ppc_md.time_init = NULL;
+ ppc_md.set_rtc_time = NULL;
+ ppc_md.get_rtc_time = NULL;
+ ppc_md.calibrate_decr = generic_calibrate_decr;
+
+ ppc_md.progress = udbg_progress;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc85xx platform_init(): exit", 0);
+}
+
+void
+mpc85xx_restart(char *cmd)
+{
+ local_irq_disable();
+ abort();
+}
+
+void
+mpc85xx_power_off(void)
+{
+ local_irq_disable();
+ for(;;);
+}
+
+void
+mpc85xx_halt(void)
+{
+ local_irq_disable();
+ for(;;);
+}
+
+/* For now this is a pass through */
+phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size)
+{
+ return addr;
+};
+EXPORT_SYMBOL(fixup_bigphys_addr);
+
+
+
+void
+mpc85xx_ads_show_cpuinfo(struct seq_file *m)
+{
+ uint pvid, svid, phid1;
+ uint memsize = total_memory;
+
+ pvid = mfspr(SPRN_PVR);
+ svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
+ seq_printf(m, "Machine\t\t: mpc85xx\n");
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ /* Display cpu Pll setting */
+ phid1 = mfspr(SPRN_HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 04073fd..c4f6b0d 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -8,7 +8,7 @@ endif
obj-$(CONFIG_PPC_CHRP) += chrp/
obj-$(CONFIG_4xx) += 4xx/
obj-$(CONFIG_PPC_83xx) += 83xx/
-obj-$(CONFIG_85xx) += 85xx/
+obj-$(CONFIG_PPC_85xx) += 85xx/
obj-$(CONFIG_PPC_PSERIES) += pseries/
obj-$(CONFIG_PPC_ISERIES) += iseries/
obj-$(CONFIG_PPC_MAPLE) += maple/
More information about the Linuxppc-dev
mailing list