[CFT] Don't use ASYNC_* nor SERIAL_IO_* with serial_core
Russell King
rmk+lkml at arm.linux.org.uk
Thu Feb 2 21:27:21 EST 2006
Ping?
On Sat, Jan 21, 2006 at 09:14:07PM +0000, Russell King wrote:
> The serial_core layer has its own definitions for these, and I'd
> appreciate it if folk would use them instead of the old ASYNC_* and
> SERIAL_IO_* definitions.
>
> They're compatible _at the moment_ but I make no guarantees that they
> will stay that way. Hence, it's in your interest to ensure that you're
> using the correct definitions.
>
> MIPS, PPC seem to be the architectures which are stuck in the past on
> this issue, as is the M32R SIO driver.
>
> The ioc4_serial driver is worse. It assumes that it can set/clear
> ASYNC_CTS_FLOW in the uart_info flags field, which is private to
> serial_core. It also seems to set TTY_IO_ERROR followed by immediately
> clearing it (pointless), and then it writes to tty->alt_speed... which
> isn't used by the serial layer so is also pointless.
>
> So, here's a patch to fix some of this crap up. Please test and
> enjoy - I certainly didn't.
>
> arch/mips/cobalt/setup.c | 2 +-
> arch/mips/lasat/setup.c | 4 ++--
> arch/mips/mips-boards/atlas/atlas_setup.c | 4 ++--
> arch/mips/mips-boards/sead/sead_setup.c | 4 ++--
> arch/mips/mips-boards/sim/sim_setup.c | 4 ++--
> arch/mips/momentum/jaguar_atx/ja-console.c | 2 +-
> arch/mips/pmc-sierra/yosemite/setup.c | 2 +-
> arch/mips/sgi-ip32/ip32-setup.c | 13 ++++---------
> arch/ppc/platforms/4xx/bamboo.c | 4 ++--
> arch/ppc/platforms/4xx/bubinga.c | 4 ++--
> arch/ppc/platforms/4xx/ebony.c | 4 ++--
> arch/ppc/platforms/4xx/luan.c | 4 ++--
> arch/ppc/platforms/4xx/ocotea.c | 4 ++--
> arch/ppc/platforms/4xx/xilinx_ml300.c | 4 ++--
> arch/ppc/platforms/4xx/yucca.c | 4 ++--
> arch/ppc/platforms/spruce.c | 4 ++--
> drivers/serial/ioc4_serial.c | 14 --------------
> drivers/serial/m32r_sio.c | 2 +-
> 18 files changed, 32 insertions(+), 51 deletions(-)
>
> diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
> --- a/arch/mips/cobalt/setup.c
> +++ b/arch/mips/cobalt/setup.c
> @@ -139,7 +139,7 @@ void __init plat_setup(void)
> uart.type = PORT_UNKNOWN;
> uart.uartclk = 18432000;
> uart.irq = COBALT_SERIAL_IRQ;
> - uart.flags = STD_COM_FLAGS;
> + uart.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> uart.iobase = 0xc800000;
> uart.iotype = UPIO_PORT;
>
> diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
> --- a/arch/mips/lasat/setup.c
> +++ b/arch/mips/lasat/setup.c
> @@ -134,8 +134,8 @@ void __init serial_init(void)
>
> memset(&s, 0, sizeof(s));
>
> - s.flags = STD_COM_FLAGS;
> - s.iotype = SERIAL_IO_MEM;
> + s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> + s.iotype = UPIO_MEM;
>
> if (mips_machtype == MACH_LASAT_100) {
> s.uartclk = LASAT_BASE_BAUD_100 * 16;
> diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
> --- a/arch/mips/mips-boards/atlas/atlas_setup.c
> +++ b/arch/mips/mips-boards/atlas/atlas_setup.c
> @@ -82,8 +82,8 @@ static void __init serial_init(void)
> #endif
> s.irq = ATLASINT_UART;
> s.uartclk = ATLAS_BASE_BAUD * 16;
> - s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
> - s.iotype = SERIAL_IO_PORT;
> + s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
> + s.iotype = UPIO_PORT;
> s.regshift = 3;
>
> if (early_serial_setup(&s) != 0) {
> diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c
> --- a/arch/mips/mips-boards/sead/sead_setup.c
> +++ b/arch/mips/mips-boards/sead/sead_setup.c
> @@ -71,8 +71,8 @@ static void __init serial_init(void)
> #endif
> s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0;
> s.uartclk = SEAD_BASE_BAUD * 16;
> - s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
> - s.iotype = 0;
> + s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
> + s.iotype = UPIO_PORT;
> s.regshift = 3;
>
> if (early_serial_setup(&s) != 0) {
> diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c
> --- a/arch/mips/mips-boards/sim/sim_setup.c
> +++ b/arch/mips/mips-boards/sim/sim_setup.c
> @@ -88,8 +88,8 @@ static void __init serial_init(void)
> but poll for now */
> s.irq = 0;
> s.uartclk = BASE_BAUD * 16;
> - s.flags = ASYNC_BOOT_AUTOCONF | UPF_SKIP_TEST;
> - s.iotype = SERIAL_IO_PORT | ASYNC_SKIP_TEST;
> + s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> + s.iotype = UPIO_PORT;
> s.regshift = 0;
> s.timeout = 4;
>
> diff --git a/arch/mips/momentum/jaguar_atx/ja-console.c b/arch/mips/momentum/jaguar_atx/ja-console.c
> --- a/arch/mips/momentum/jaguar_atx/ja-console.c
> +++ b/arch/mips/momentum/jaguar_atx/ja-console.c
> @@ -93,7 +93,7 @@ static void inline ja_console_probe(void
> up.uartclk = JAGUAR_ATX_UART_CLK;
> up.regshift = 2;
> up.iotype = UPIO_MEM;
> - up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> up.line = 0;
>
> if (early_serial_setup(&up))
> diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
> --- a/arch/mips/pmc-sierra/yosemite/setup.c
> +++ b/arch/mips/pmc-sierra/yosemite/setup.c
> @@ -185,7 +185,7 @@ static void __init py_uart_setup(void)
> up.uartclk = TITAN_UART_CLK;
> up.regshift = 0;
> up.iotype = UPIO_MEM;
> - up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> up.line = 0;
>
> if (early_serial_setup(&up))
> diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
> --- a/arch/mips/sgi-ip32/ip32-setup.c
> +++ b/arch/mips/sgi-ip32/ip32-setup.c
> @@ -66,11 +66,6 @@ static inline void str2eaddr(unsigned ch
> #include <linux/tty.h>
> #include <linux/serial.h>
> #include <linux/serial_core.h>
> -extern int early_serial_setup(struct uart_port *port);
> -
> -#define STD_COM_FLAGS (ASYNC_SKIP_TEST)
> -#define BASE_BAUD (1843200 / 16)
> -
> #endif /* CONFIG_SERIAL_8250 */
>
> /* An arbitrary time; this can be decreased if reliability looks good */
> @@ -110,8 +105,8 @@ void __init plat_setup(void)
> o2_serial[0].type = PORT_16550A;
> o2_serial[0].line = 0;
> o2_serial[0].irq = MACEISA_SERIAL1_IRQ;
> - o2_serial[0].flags = STD_COM_FLAGS;
> - o2_serial[0].uartclk = BASE_BAUD * 16;
> + o2_serial[0].flags = UPF_SKIP_TEST;
> + o2_serial[0].uartclk = 1843200;
> o2_serial[0].iotype = UPIO_MEM;
> o2_serial[0].membase = (char *)&mace->isa.serial1;
> o2_serial[0].fifosize = 14;
> @@ -121,8 +116,8 @@ void __init plat_setup(void)
> o2_serial[1].type = PORT_16550A;
> o2_serial[1].line = 1;
> o2_serial[1].irq = MACEISA_SERIAL2_IRQ;
> - o2_serial[1].flags = STD_COM_FLAGS;
> - o2_serial[1].uartclk = BASE_BAUD * 16;
> + o2_serial[1].flags = UPF_SKIP_TEST;
> + o2_serial[1].uartclk = 1843200;
> o2_serial[1].iotype = UPIO_MEM;
> o2_serial[1].membase = (char *)&mace->isa.serial2;
> o2_serial[1].fifosize = 14;
> diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c
> --- a/arch/ppc/platforms/4xx/bamboo.c
> +++ b/arch/ppc/platforms/4xx/bamboo.c
> @@ -332,8 +332,8 @@ bamboo_early_serial_map(void)
> port.irq = 0;
> port.uartclk = clocks.uart0;
> port.regshift = 0;
> - port.iotype = SERIAL_IO_MEM;
> - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + port.iotype = UPIO_MEM;
> + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> port.line = 0;
>
> if (early_serial_setup(&port) != 0) {
> diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c
> --- a/arch/ppc/platforms/4xx/bubinga.c
> +++ b/arch/ppc/platforms/4xx/bubinga.c
> @@ -97,8 +97,8 @@ bubinga_early_serial_map(void)
> port.irq = ACTING_UART0_INT;
> port.uartclk = uart_clock;
> port.regshift = 0;
> - port.iotype = SERIAL_IO_MEM;
> - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + port.iotype = UPIO_MEM;
> + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> port.line = 0;
>
> if (early_serial_setup(&port) != 0) {
> diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
> --- a/arch/ppc/platforms/4xx/ebony.c
> +++ b/arch/ppc/platforms/4xx/ebony.c
> @@ -225,8 +225,8 @@ ebony_early_serial_map(void)
> port.irq = 0;
> port.uartclk = clocks.uart0;
> port.regshift = 0;
> - port.iotype = SERIAL_IO_MEM;
> - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + port.iotype = UPIO_MEM;
> + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> port.line = 0;
>
> if (early_serial_setup(&port) != 0) {
> diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
> --- a/arch/ppc/platforms/4xx/luan.c
> +++ b/arch/ppc/platforms/4xx/luan.c
> @@ -279,8 +279,8 @@ luan_early_serial_map(void)
> port.irq = UART0_INT;
> port.uartclk = clocks.uart0;
> port.regshift = 0;
> - port.iotype = SERIAL_IO_MEM;
> - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + port.iotype = UPIO_MEM;
> + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> port.line = 0;
>
> if (early_serial_setup(&port) != 0) {
> diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
> --- a/arch/ppc/platforms/4xx/ocotea.c
> +++ b/arch/ppc/platforms/4xx/ocotea.c
> @@ -248,8 +248,8 @@ ocotea_early_serial_map(void)
> port.irq = UART0_INT;
> port.uartclk = clocks.uart0;
> port.regshift = 0;
> - port.iotype = SERIAL_IO_MEM;
> - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + port.iotype = UPIO_MEM;
> + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> port.line = 0;
>
> if (early_serial_setup(&port) != 0) {
> diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c
> --- a/arch/ppc/platforms/4xx/xilinx_ml300.c
> +++ b/arch/ppc/platforms/4xx/xilinx_ml300.c
> @@ -95,8 +95,8 @@ ml300_early_serial_map(void)
> port.irq = old_ports[i].irq;
> port.uartclk = old_ports[i].baud_base * 16;
> port.regshift = old_ports[i].iomem_reg_shift;
> - port.iotype = SERIAL_IO_MEM;
> - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + port.iotype = UPIO_MEM;
> + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> port.line = i;
>
> if (early_serial_setup(&port) != 0) {
> diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c
> --- a/arch/ppc/platforms/4xx/yucca.c
> +++ b/arch/ppc/platforms/4xx/yucca.c
> @@ -305,8 +305,8 @@ yucca_early_serial_map(void)
> port.irq = UART0_INT;
> port.uartclk = clocks.uart0;
> port.regshift = 0;
> - port.iotype = SERIAL_IO_MEM;
> - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + port.iotype = UPIO_MEM;
> + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> port.line = 0;
>
> if (early_serial_setup(&port) != 0) {
> diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c
> --- a/arch/ppc/platforms/spruce.c
> +++ b/arch/ppc/platforms/spruce.c
> @@ -176,8 +176,8 @@ spruce_early_serial_map(void)
> memset(&serial_req, 0, sizeof(serial_req));
> serial_req.uartclk = uart_clk;
> serial_req.irq = UART0_INT;
> - serial_req.flags = ASYNC_BOOT_AUTOCONF;
> - serial_req.iotype = SERIAL_IO_MEM;
> + serial_req.flags = UPF_BOOT_AUTOCONF;
> + serial_req.iotype = UPIO_MEM;
> serial_req.membase = (u_char *)UART0_IO_BASE;
> serial_req.regshift = 0;
>
> diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
> --- a/drivers/serial/ioc4_serial.c
> +++ b/drivers/serial/ioc4_serial.c
> @@ -1717,11 +1717,9 @@ ioc4_change_speed(struct uart_port *the_
> }
>
> if (cflag & CRTSCTS) {
> - info->flags |= ASYNC_CTS_FLOW;
> port->ip_sscr |= IOC4_SSCR_HFC_EN;
> }
> else {
> - info->flags &= ~ASYNC_CTS_FLOW;
> port->ip_sscr &= ~IOC4_SSCR_HFC_EN;
> }
> writel(port->ip_sscr, &port->ip_serial_regs->sscr);
> @@ -1760,18 +1758,6 @@ static inline int ic4_startup_local(stru
>
> info = the_port->info;
>
> - if (info->tty) {
> - set_bit(TTY_IO_ERROR, &info->tty->flags);
> - clear_bit(TTY_IO_ERROR, &info->tty->flags);
> - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
> - info->tty->alt_speed = 57600;
> - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
> - info->tty->alt_speed = 115200;
> - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
> - info->tty->alt_speed = 230400;
> - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
> - info->tty->alt_speed = 460800;
> - }
> local_open(port);
>
> /* set the speed of the serial port */
> diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
> --- a/drivers/serial/m32r_sio.c
> +++ b/drivers/serial/m32r_sio.c
> @@ -80,7 +80,7 @@
> #include <asm/serial.h>
>
> /* Standard COM flags */
> -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
> +#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
>
> /*
> * SERIAL_PORT_DFNS tells us about built-in ports that have no
> diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
> --- a/arch/mips/cobalt/setup.c
> +++ b/arch/mips/cobalt/setup.c
> @@ -139,7 +139,7 @@ void __init plat_setup(void)
> uart.type = PORT_UNKNOWN;
> uart.uartclk = 18432000;
> uart.irq = COBALT_SERIAL_IRQ;
> - uart.flags = STD_COM_FLAGS;
> + uart.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> uart.iobase = 0xc800000;
> uart.iotype = UPIO_PORT;
>
> diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
> --- a/arch/mips/lasat/setup.c
> +++ b/arch/mips/lasat/setup.c
> @@ -134,8 +134,8 @@ void __init serial_init(void)
>
> memset(&s, 0, sizeof(s));
>
> - s.flags = STD_COM_FLAGS;
> - s.iotype = SERIAL_IO_MEM;
> + s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> + s.iotype = UPIO_MEM;
>
> if (mips_machtype == MACH_LASAT_100) {
> s.uartclk = LASAT_BASE_BAUD_100 * 16;
> diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
> --- a/arch/mips/mips-boards/atlas/atlas_setup.c
> +++ b/arch/mips/mips-boards/atlas/atlas_setup.c
> @@ -82,8 +82,8 @@ static void __init serial_init(void)
> #endif
> s.irq = ATLASINT_UART;
> s.uartclk = ATLAS_BASE_BAUD * 16;
> - s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
> - s.iotype = SERIAL_IO_PORT;
> + s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
> + s.iotype = UPIO_PORT;
> s.regshift = 3;
>
> if (early_serial_setup(&s) != 0) {
> diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c
> --- a/arch/mips/mips-boards/sead/sead_setup.c
> +++ b/arch/mips/mips-boards/sead/sead_setup.c
> @@ -71,8 +71,8 @@ static void __init serial_init(void)
> #endif
> s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0;
> s.uartclk = SEAD_BASE_BAUD * 16;
> - s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
> - s.iotype = 0;
> + s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
> + s.iotype = UPIO_PORT;
> s.regshift = 3;
>
> if (early_serial_setup(&s) != 0) {
> diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c
> --- a/arch/mips/mips-boards/sim/sim_setup.c
> +++ b/arch/mips/mips-boards/sim/sim_setup.c
> @@ -88,8 +88,8 @@ static void __init serial_init(void)
> but poll for now */
> s.irq = 0;
> s.uartclk = BASE_BAUD * 16;
> - s.flags = ASYNC_BOOT_AUTOCONF | UPF_SKIP_TEST;
> - s.iotype = SERIAL_IO_PORT | ASYNC_SKIP_TEST;
> + s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> + s.iotype = UPIO_PORT;
> s.regshift = 0;
> s.timeout = 4;
>
> diff --git a/arch/mips/momentum/jaguar_atx/ja-console.c b/arch/mips/momentum/jaguar_atx/ja-console.c
> --- a/arch/mips/momentum/jaguar_atx/ja-console.c
> +++ b/arch/mips/momentum/jaguar_atx/ja-console.c
> @@ -93,7 +93,7 @@ static void inline ja_console_probe(void
> up.uartclk = JAGUAR_ATX_UART_CLK;
> up.regshift = 2;
> up.iotype = UPIO_MEM;
> - up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> up.line = 0;
>
> if (early_serial_setup(&up))
> diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
> --- a/arch/mips/pmc-sierra/yosemite/setup.c
> +++ b/arch/mips/pmc-sierra/yosemite/setup.c
> @@ -185,7 +185,7 @@ static void __init py_uart_setup(void)
> up.uartclk = TITAN_UART_CLK;
> up.regshift = 0;
> up.iotype = UPIO_MEM;
> - up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> up.line = 0;
>
> if (early_serial_setup(&up))
> diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
> --- a/arch/mips/sgi-ip32/ip32-setup.c
> +++ b/arch/mips/sgi-ip32/ip32-setup.c
> @@ -66,11 +66,6 @@ static inline void str2eaddr(unsigned ch
> #include <linux/tty.h>
> #include <linux/serial.h>
> #include <linux/serial_core.h>
> -extern int early_serial_setup(struct uart_port *port);
> -
> -#define STD_COM_FLAGS (ASYNC_SKIP_TEST)
> -#define BASE_BAUD (1843200 / 16)
> -
> #endif /* CONFIG_SERIAL_8250 */
>
> /* An arbitrary time; this can be decreased if reliability looks good */
> @@ -110,8 +105,8 @@ void __init plat_setup(void)
> o2_serial[0].type = PORT_16550A;
> o2_serial[0].line = 0;
> o2_serial[0].irq = MACEISA_SERIAL1_IRQ;
> - o2_serial[0].flags = STD_COM_FLAGS;
> - o2_serial[0].uartclk = BASE_BAUD * 16;
> + o2_serial[0].flags = UPF_SKIP_TEST;
> + o2_serial[0].uartclk = 1843200;
> o2_serial[0].iotype = UPIO_MEM;
> o2_serial[0].membase = (char *)&mace->isa.serial1;
> o2_serial[0].fifosize = 14;
> @@ -121,8 +116,8 @@ void __init plat_setup(void)
> o2_serial[1].type = PORT_16550A;
> o2_serial[1].line = 1;
> o2_serial[1].irq = MACEISA_SERIAL2_IRQ;
> - o2_serial[1].flags = STD_COM_FLAGS;
> - o2_serial[1].uartclk = BASE_BAUD * 16;
> + o2_serial[1].flags = UPF_SKIP_TEST;
> + o2_serial[1].uartclk = 1843200;
> o2_serial[1].iotype = UPIO_MEM;
> o2_serial[1].membase = (char *)&mace->isa.serial2;
> o2_serial[1].fifosize = 14;
> diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c
> --- a/arch/ppc/platforms/4xx/bamboo.c
> +++ b/arch/ppc/platforms/4xx/bamboo.c
> @@ -332,8 +332,8 @@ bamboo_early_serial_map(void)
> port.irq = 0;
> port.uartclk = clocks.uart0;
> port.regshift = 0;
> - port.iotype = SERIAL_IO_MEM;
> - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + port.iotype = UPIO_MEM;
> + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> port.line = 0;
>
> if (early_serial_setup(&port) != 0) {
> diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c
> --- a/arch/ppc/platforms/4xx/bubinga.c
> +++ b/arch/ppc/platforms/4xx/bubinga.c
> @@ -97,8 +97,8 @@ bubinga_early_serial_map(void)
> port.irq = ACTING_UART0_INT;
> port.uartclk = uart_clock;
> port.regshift = 0;
> - port.iotype = SERIAL_IO_MEM;
> - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + port.iotype = UPIO_MEM;
> + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> port.line = 0;
>
> if (early_serial_setup(&port) != 0) {
> diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
> --- a/arch/ppc/platforms/4xx/ebony.c
> +++ b/arch/ppc/platforms/4xx/ebony.c
> @@ -225,8 +225,8 @@ ebony_early_serial_map(void)
> port.irq = 0;
> port.uartclk = clocks.uart0;
> port.regshift = 0;
> - port.iotype = SERIAL_IO_MEM;
> - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + port.iotype = UPIO_MEM;
> + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> port.line = 0;
>
> if (early_serial_setup(&port) != 0) {
> diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
> --- a/arch/ppc/platforms/4xx/luan.c
> +++ b/arch/ppc/platforms/4xx/luan.c
> @@ -279,8 +279,8 @@ luan_early_serial_map(void)
> port.irq = UART0_INT;
> port.uartclk = clocks.uart0;
> port.regshift = 0;
> - port.iotype = SERIAL_IO_MEM;
> - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + port.iotype = UPIO_MEM;
> + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> port.line = 0;
>
> if (early_serial_setup(&port) != 0) {
> diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
> --- a/arch/ppc/platforms/4xx/ocotea.c
> +++ b/arch/ppc/platforms/4xx/ocotea.c
> @@ -248,8 +248,8 @@ ocotea_early_serial_map(void)
> port.irq = UART0_INT;
> port.uartclk = clocks.uart0;
> port.regshift = 0;
> - port.iotype = SERIAL_IO_MEM;
> - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + port.iotype = UPIO_MEM;
> + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> port.line = 0;
>
> if (early_serial_setup(&port) != 0) {
> diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c
> --- a/arch/ppc/platforms/4xx/xilinx_ml300.c
> +++ b/arch/ppc/platforms/4xx/xilinx_ml300.c
> @@ -95,8 +95,8 @@ ml300_early_serial_map(void)
> port.irq = old_ports[i].irq;
> port.uartclk = old_ports[i].baud_base * 16;
> port.regshift = old_ports[i].iomem_reg_shift;
> - port.iotype = SERIAL_IO_MEM;
> - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + port.iotype = UPIO_MEM;
> + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> port.line = i;
>
> if (early_serial_setup(&port) != 0) {
> diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c
> --- a/arch/ppc/platforms/4xx/yucca.c
> +++ b/arch/ppc/platforms/4xx/yucca.c
> @@ -305,8 +305,8 @@ yucca_early_serial_map(void)
> port.irq = UART0_INT;
> port.uartclk = clocks.uart0;
> port.regshift = 0;
> - port.iotype = SERIAL_IO_MEM;
> - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
> + port.iotype = UPIO_MEM;
> + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
> port.line = 0;
>
> if (early_serial_setup(&port) != 0) {
> diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c
> --- a/arch/ppc/platforms/spruce.c
> +++ b/arch/ppc/platforms/spruce.c
> @@ -176,8 +176,8 @@ spruce_early_serial_map(void)
> memset(&serial_req, 0, sizeof(serial_req));
> serial_req.uartclk = uart_clk;
> serial_req.irq = UART0_INT;
> - serial_req.flags = ASYNC_BOOT_AUTOCONF;
> - serial_req.iotype = SERIAL_IO_MEM;
> + serial_req.flags = UPF_BOOT_AUTOCONF;
> + serial_req.iotype = UPIO_MEM;
> serial_req.membase = (u_char *)UART0_IO_BASE;
> serial_req.regshift = 0;
>
> diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
> --- a/drivers/serial/ioc4_serial.c
> +++ b/drivers/serial/ioc4_serial.c
> @@ -1717,11 +1717,9 @@ ioc4_change_speed(struct uart_port *the_
> }
>
> if (cflag & CRTSCTS) {
> - info->flags |= ASYNC_CTS_FLOW;
> port->ip_sscr |= IOC4_SSCR_HFC_EN;
> }
> else {
> - info->flags &= ~ASYNC_CTS_FLOW;
> port->ip_sscr &= ~IOC4_SSCR_HFC_EN;
> }
> writel(port->ip_sscr, &port->ip_serial_regs->sscr);
> @@ -1760,18 +1758,6 @@ static inline int ic4_startup_local(stru
>
> info = the_port->info;
>
> - if (info->tty) {
> - set_bit(TTY_IO_ERROR, &info->tty->flags);
> - clear_bit(TTY_IO_ERROR, &info->tty->flags);
> - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
> - info->tty->alt_speed = 57600;
> - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
> - info->tty->alt_speed = 115200;
> - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
> - info->tty->alt_speed = 230400;
> - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
> - info->tty->alt_speed = 460800;
> - }
> local_open(port);
>
> /* set the speed of the serial port */
> diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
> --- a/drivers/serial/m32r_sio.c
> +++ b/drivers/serial/m32r_sio.c
> @@ -80,7 +80,7 @@
> #include <asm/serial.h>
>
> /* Standard COM flags */
> -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
> +#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
>
> /*
> * SERIAL_PORT_DFNS tells us about built-in ports that have no
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core
More information about the Linuxppc-dev
mailing list