[PATCH 12/19] powerpc: setup sio in SCC for Celleb

[Ishizaki Kou]

This patch setup serial interfaces in SCC.

Signed-off-by: Kou Ishizaki <kou.ishizaki at toshiba.co.jp>
---

Index: linux-powerpc-git/arch/powerpc/platforms/celleb/scc_sio.c
diff -u /dev/null linux-powerpc-git/arch/powerpc/platforms/celleb/scc_sio.c:1.2
--- /dev/null	Wed Dec 13 21:32:03 2006
+++ linux-powerpc-git/arch/powerpc/platforms/celleb/scc_sio.c	Wed Dec 13 17:10:56 2006
@@ -0,0 +1,113 @@
+/*
+ * setup serial port in SCC
+ *
+ * (C) Copyright 2006 TOSHIBA CORPORATION
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/console.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+
+/* sio irq0=0xb00010022 irq0=0xb00010023 irq2=0xb00010024
+    mmio=0xfff000-0x1000,0xff2000-0x1000 */
+static int txx9_serial_bitmap = 0;
+
+static struct {
+	uint32_t offset;
+	uint32_t index;
+} txx9_spider_tab[3] = {
+	{ 0x300, 0 },	/* 0xFFF300 */
+	{ 0x400, 0 },	/* 0xFFF400 */
+	{ 0x800, 1 }	/* 0xFF2800 */
+};
+
+static int txx9_serial_init(void)
+{
+	extern int early_serial_txx9_setup(struct uart_port *port);
+	struct device_node *node;
+	const uint64_t *irq_prop, *base_prop;
+	int irq_len, base_addr_len;
+	int i, maxi;
+	struct uart_port req;
+
+	node = of_find_node_by_path("/ioif1/sio");
+	if (!node)
+		return 0;
+
+	irq_prop = get_property(node, "interrupts", &irq_len);
+	if (!irq_prop)
+		goto out;
+	irq_len /= sizeof(uint64_t);
+
+	base_prop = get_property(node, "toshiba,reg", &base_addr_len);
+	if (!base_prop)
+		goto out;
+	base_addr_len /= sizeof(uint64_t) * 2;
+
+	maxi = sizeof(txx9_spider_tab)/sizeof(txx9_spider_tab[0]);
+	if (maxi > irq_len)
+		maxi = irq_len;
+
+	for(i = 0; i < maxi; i++) {
+		if (!(txx9_serial_bitmap & (1<<i)))
+			continue;
+		if (base_addr_len <= txx9_spider_tab[i].index)
+			continue;
+
+		memset(&req, 0, sizeof(req));
+		req.line = i;
+		req.iotype = UPIO_MEM;
+		req.mapbase = base_prop[txx9_spider_tab[i].index * 2]
+			+ txx9_spider_tab[i].offset;
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+		req.membase = ioremap(req.mapbase, 0x24);
+#endif
+		req.irq = irq_create_mapping(NULL, irq_prop[i]);
+		req.flags |= UPF_IOREMAP | UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+		req.uartclk = 83300000;
+		early_serial_txx9_setup(&req);
+	}
+
+out:
+	of_node_put(node);
+	return 0;
+}
+
+static int txx9_serial_config(char *ptr)
+{
+	int	i;
+
+	for (;;) {
+		switch(get_option(&ptr, &i)) {
+		default:
+			return 0;
+		case 2:
+			txx9_serial_bitmap |= 1 << i;
+			break;
+		case 1:
+			txx9_serial_bitmap |= 1 << i;
+			return 0;
+		}
+	}
+}
+__setup("txx9_serial=", txx9_serial_config);
+
+console_initcall(txx9_serial_init);