[PATCH] Add 85xx DTS files to powerpc

[Sergei Shtylyov]

Hello.

Andy Fleming wrote:
> Added the mpc85xx family of dts files to the powerpc tree
> ---
>  arch/powerpc/boot/dts/mpc8540ads.dts |  257 ++++++++++++++++++++++++++++++
>  arch/powerpc/boot/dts/mpc8541cds.dts |  244 +++++++++++++++++++++++++++++
>  arch/powerpc/boot/dts/mpc8548cds.dts |  287 ++++++++++++++++++++++++++++++++++
>  arch/powerpc/boot/dts/mpc8555cds.dts |  244 +++++++++++++++++++++++++++++
>  4 files changed, 1032 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
> new file mode 100644
> index 0000000..93d2c2d
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/mpc8540ads.dts

[...]

> +			ethernet-phy at 2 {
> +				linux,phandle = <2452002>;
> +				interrupt-parent = <40000>;
> +				interrupts = <37 1>;
> +				reg = <2>;
> +				device_type = "ethernet-phy";
> +			};

    Well, there's PHYs #2 and #3 on the board, #2 is probably not tied to
anything though.

> +		ethernet at 26000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			device_type = "network";
> +			model = "TSEC";
> +			compatible = "gianfar";
> +			reg = <26000 1000>;
> +			address = [ 00 E0 0C 00 73 02 ];
> +			local-mac-address = [ 00 E0 0C 00 73 02 ];
> +			interrupts = <19 2>;
> +			interrupt-parent = <40000>;
> +			phy-handle = <2452002>;
> +		};

    Shouldn't it be "FEC" instead? The third controller is actually Fast
Ethernet and fsl_soc.c differs TSEC and FEC WRT the interrupts (FEC has only
one). So, this entry looks incorrect...

> +		pic at 40000 {
> +			linux,phandle = <40000>;
> +			clock-frequency = <0>;
> +			interrupt-controller;
> +			#address-cells = <0>;
> +			#interrupt-cells = <2>;
> +			reg = <40000 40000>;
> +			built-in;
> +			compatible = "chrp,open-pic";
> +			device_type = "open-pic";
> +                        big-endian;

    Spaces instead of tabs in this line...

> +		};
> +	};
> +};

WBR, Sergei