[PATCH][2/2] RTAS MSI
Jake Moilanen
moilanen at austin.ibm.com
Tue Aug 1 07:01:53 EST 2006
Here's version 3 which addresses all of Michael's comments.
Signed-off-by: Jake Moilanen <moilanen at austin.ibm.com>
arch/powerpc/kernel/prom_init.c | 8 ++
arch/powerpc/platforms/pseries/setup.c | 4 +
arch/powerpc/platforms/pseries/xics.c | 5 +
drivers/pci/Kconfig | 2
drivers/pci/Makefile | 5 +
drivers/pci/msi-rtas.c | 99
+++++++++++++++++++++++++++++++++
include/asm-powerpc/rtas.h | 4 +
7 files changed, 122 insertions(+), 5 deletions(-)
Index: 2.6-msi/drivers/pci/Makefile
===================================================================
--- 2.6-msi.orig/drivers/pci/Makefile
+++ 2.6-msi/drivers/pci/Makefile
@@ -27,9 +27,12 @@ obj-$(CONFIG_PPC64) += setup-bus.o
obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
obj-$(CONFIG_X86_VISWS) += setup-irq.o
-msiobj-y := msi.o msi-apic.o
+msiobj-$(CONFIG_X86) += msi.o msi-apic.o
+msiobj-$(CONFIG_IA64) += msi.o msi-apic.o
msiobj-$(CONFIG_IA64_GENERIC) += msi-altix.o
msiobj-$(CONFIG_IA64_SGI_SN2) += msi-altix.o
+msiobj-$(CONFIG_PPC_PSERIES) += msi-rtas.o
+
obj-$(CONFIG_PCI_MSI) += $(msiobj-y)
#
Index: 2.6-msi/drivers/pci/msi-rtas.c
===================================================================
--- /dev/null
+++ 2.6-msi/drivers/pci/msi-rtas.c
@@ -0,0 +1,99 @@
+/*
+ * Jake Moilanen <moilanen at austin.ibm.com>
+ * Copyright (C) 2006 IBM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <asm/rtas.h>
+#include <asm/hw_irq.h>
+#include <asm/ppc-pci.h>
+
+int rtas_enable_msi(struct pci_dev* pdev)
+{
+ int seq_num = 1;
+ int i;
+ int rc;
+ int query_token = rtas_token("ibm,query-interrupt-source-number");
+ int ret[2];
+ int n_intr;
+ int last_virq = NO_IRQ;
+ int virq;
+ unsigned int addr;
+ unsigned long buid;
+ struct device_node * dn;
+
+ dn = pci_device_to_OF_node(pdev);
+
+ if (!of_find_property(dn, "ibm,req#msi", NULL))
+ return -ENOENT;
+
+ buid = get_phb_buid(dn->parent);
+ addr = (pdev->bus->number << 16) | (pdev->devfn << 8);
+
+ do {
+ rc = rtas_call(rtas_token("ibm,change-msi"), 6, 3, ret, addr,
+ buid >> 32, buid & 0xffffffff,
+ 0, 0, seq_num);
+
+ seq_num = ret[1];
+ } while (rtas_busy_delay(rc));
+
+ if (rc) {
+ printk(KERN_WARNING "error[%d]: getting the number of "
+ "MSI interrupts for %s\n", rc, dn->name);
+ return -EIO;
+ }
+
+ /* Return if there's no MSI interrupts */
+ if (!ret[0])
+ return -ENOENT;
+
+ n_intr = ret[0];
+
+ for (i = 0; i < n_intr; i++) {
+ do {
+ rc = rtas_call(query_token, 4, 3, ret, addr,
+ buid >> 32, buid & 0xffffffff, i);
+ } while (rtas_busy_delay(rc));
+
+ if (!rc) {
+ virq = irq_create_mapping(irq_find_host(dn), ret[0],
+ ret[1] ? IRQ_TYPE_EDGE_RISING :
+ IRQ_TYPE_LEVEL_LOW);
+
+ /* for now, take the last valid vector given out */
+ if (virq != NO_IRQ)
+ last_virq = virq;
+
+ } else {
+ printk(KERN_WARNING "error[%d]: "
+ "query-interrupt-source-number for %s\n",
+ rc, dn->name);
+ }
+ }
+
+ /*
+ * If we can't get any MSI vectors, fail and try falling
+ * back to LSI
+ */
+ if (last_virq == NO_IRQ)
+ return -EIO;
+
+ pdev->irq = last_virq;
+
+ return 0;
+}
+
+void rtas_disable_msi(struct pci_dev* pdev)
+{
+ /*
+ * for now, we don't give firmware back vectors to their pool
+ */
+}
Index: 2.6-msi/drivers/pci/Kconfig
===================================================================
--- 2.6-msi.orig/drivers/pci/Kconfig
+++ 2.6-msi/drivers/pci/Kconfig
@@ -4,7 +4,7 @@
config PCI_MSI
bool "Message Signaled Interrupts (MSI and MSI-X)"
depends on PCI
- depends on (X86_LOCAL_APIC && X86_IO_APIC) || IA64
+ depends on (X86_LOCAL_APIC && X86_IO_APIC) || IA64 || PPC_PSERIES
help
This allows device drivers to enable MSI (Message Signaled
Interrupts). Message Signaled Interrupts enable a device to
Index: 2.6-msi/arch/powerpc/platforms/pseries/setup.c
===================================================================
--- 2.6-msi.orig/arch/powerpc/platforms/pseries/setup.c
+++ 2.6-msi/arch/powerpc/platforms/pseries/setup.c
@@ -267,6 +267,10 @@ static void __init pseries_discover_pic(
return;
} else if (strstr(typep, "ppc-xicp")) {
ppc_md.init_IRQ = xics_init_IRQ;
+#ifdef CONFIG_PCI_MSI
+ ppc_md.enable_msi = rtas_enable_msi;
+ ppc_md.disable_msi = rtas_disable_msi;
+#endif
#ifdef CONFIG_KEXEC
ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics;
#endif
Index: 2.6-msi/include/asm-powerpc/rtas.h
===================================================================
--- 2.6-msi.orig/include/asm-powerpc/rtas.h
+++ 2.6-msi/include/asm-powerpc/rtas.h
@@ -4,6 +4,7 @@
#include <linux/spinlock.h>
#include <asm/page.h>
+#include <linux/pci.h>
/*
* Definitions for talking to the RTAS on CHRP machines.
@@ -186,6 +187,9 @@ extern int early_init_dt_scan_rtas(unsig
extern void pSeries_log_error(char *buf, unsigned int err_type, int
fatal);
+extern int rtas_enable_msi(struct pci_dev* pdev);
+extern void rtas_disable_msi(struct pci_dev * pdev);
+
/* Error types logged. */
#define ERR_FLAG_ALREADY_LOGGED 0x0
#define ERR_FLAG_BOOT 0x1 /* log was pulled from NVRAM on boot */
Index: 2.6-msi/arch/powerpc/kernel/prom_init.c
===================================================================
--- 2.6-msi.orig/arch/powerpc/kernel/prom_init.c
+++ 2.6-msi/arch/powerpc/kernel/prom_init.c
@@ -632,6 +632,12 @@ static void __init early_cmdline_parse(v
/* ibm,dynamic-reconfiguration-memory property supported */
#define OV5_DRCONF_MEMORY 0x20
#define OV5_LARGE_PAGES 0x10 /* large pages supported */
+/* PCIe/MSI support. Without MSI full PCIe is not supported */
+#ifdef CONFIG_PCI_MSI
+#define OV5_MSI 0x01 /* PCIe/MSI support */
+#else
+#define OV5_MSI 0x00
+#endif /* CONFIG_PCI_MSI */
/*
* The architecture vector has an array of PVR mask/value pairs,
@@ -675,7 +681,7 @@ static unsigned char ibm_architecture_ve
/* option vector 5: PAPR/OF options */
3 - 1, /* length */
0, /* don't ignore, don't halt */
- OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES,
+ OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_MSI,
};
/* Old method - ELF header with PT_NOTE sections */
Index: 2.6-msi/arch/powerpc/platforms/pseries/xics.c
===================================================================
--- 2.6-msi.orig/arch/powerpc/platforms/pseries/xics.c
+++ 2.6-msi/arch/powerpc/platforms/pseries/xics.c
@@ -526,11 +526,12 @@ static int xics_host_map_lpar(struct irq
pr_debug("xics: map_lpar virq %d, hwirq 0x%lx, flags: 0x%x\n",
virq, hw, flags);
- if (sense && sense != IRQ_TYPE_LEVEL_LOW)
+ if (sense && !(sense & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_RISING)))
printk(KERN_WARNING "xics: using unsupported sense 0x%x"
" for irq %d (h: 0x%lx)\n", flags, virq, hw);
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ if (sense && sense & IRQ_TYPE_LEVEL_LOW)
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &xics_pic_lpar, handle_fasteoi_irq);
return 0;
}
More information about the Linuxppc-dev
mailing list