[PATCH 5/6] powerpc: merge the rest of arch/ppc*/oprofile
Stephen Rothwell
sfr at canb.auug.org.au
Mon Sep 19 23:24:08 EST 2005
- merge common.c
- move model specific files
- remove stub Makefiles
- clean up arch/ppc*/Makefile
Signed-off-by: Stephen Rothwell <sfr at canb.auug.org.au>
---
arch/powerpc/oprofile/common.c | 214 +++++++++++++++++++
arch/powerpc/oprofile/op_model_fsl_booke.c | 183 +++++++++++++++++
arch/powerpc/oprofile/op_model_power4.c | 309 ++++++++++++++++++++++++++++
arch/powerpc/oprofile/op_model_rs64.c | 218 ++++++++++++++++++++
arch/ppc/Makefile | 2
arch/ppc/oprofile/Makefile | 1
arch/ppc/oprofile/common.c | 160 --------------
arch/ppc/oprofile/op_model_fsl_booke.c | 183 -----------------
arch/ppc64/Makefile | 2
arch/ppc64/oprofile/Makefile | 1
arch/ppc64/oprofile/common.c | 145 -------------
arch/ppc64/oprofile/op_model_power4.c | 309 ----------------------------
arch/ppc64/oprofile/op_model_rs64.c | 218 --------------------
13 files changed, 926 insertions(+), 1019 deletions(-)
create mode 100644 arch/powerpc/oprofile/common.c
create mode 100644 arch/powerpc/oprofile/op_model_fsl_booke.c
create mode 100644 arch/powerpc/oprofile/op_model_power4.c
create mode 100644 arch/powerpc/oprofile/op_model_rs64.c
delete mode 100644 arch/ppc/oprofile/Makefile
delete mode 100644 arch/ppc/oprofile/common.c
delete mode 100644 arch/ppc/oprofile/op_model_fsl_booke.c
delete mode 100644 arch/ppc64/oprofile/Makefile
delete mode 100644 arch/ppc64/oprofile/common.c
delete mode 100644 arch/ppc64/oprofile/op_model_power4.c
delete mode 100644 arch/ppc64/oprofile/op_model_rs64.c
--
Cheers,
Stephen Rothwell sfr at canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
6dc3424cfdea7aedd29e9aad5eb93c84f922bdd1
diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c
new file mode 100644
--- /dev/null
+++ b/arch/powerpc/oprofile/common.c
@@ -0,0 +1,214 @@
+/*
+ * PPC 64 oprofile support:
+ * Copyright (C) 2004 Anton Blanchard <anton at au.ibm.com>, IBM
+ * PPC 32 oprofile support: (based on PPC 64 support)
+ * Copyright (C) Freescale Semiconductor, Inc 2004
+ * Author: Andy Fleming
+ *
+ * Based on alpha version.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/oprofile.h>
+#ifndef __powerpc64__
+#include <linux/slab.h>
+#endif /* ! __powerpc64__ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#ifdef __powerpc64__
+#include <asm/pmc.h>
+#else /* __powerpc64__ */
+#include <asm/perfmon.h>
+#endif /* __powerpc64__ */
+#include <asm/cputable.h>
+#include <asm/oprofile_impl.h>
+
+static struct op_powerpc_model *model;
+
+static struct op_counter_config ctr[OP_MAX_COUNTER];
+static struct op_system_config sys;
+
+#ifndef __powerpc64__
+static char *cpu_type;
+#endif /* ! __powerpc64__ */
+
+static void op_handle_interrupt(struct pt_regs *regs)
+{
+ model->handle_interrupt(regs, ctr);
+}
+
+static int op_powerpc_setup(void)
+{
+#ifdef __powerpc64__
+ int err;
+
+ /* Grab the hardware */
+ err = reserve_pmc_hardware(op_handle_interrupt);
+ if (err)
+ return err;
+#else /* __powerpc64__ */
+ /* Install our interrupt handler into the existing hook. */
+ if (request_perfmon_irq(&op_handle_interrupt))
+ return -EBUSY;
+ mb();
+#endif /* __powerpc64__ */
+
+ /* Pre-compute the values to stuff in the hardware registers. */
+ model->reg_setup(ctr, &sys, model->num_counters);
+
+ /* Configure the registers on all cpus. */
+#ifdef __powerpc64__
+ on_each_cpu(model->cpu_setup, NULL, 0, 1);
+#else /* __powerpc64__ */
+#if 0
+ /* FIXME: Make multi-cpu work */
+ on_each_cpu(model->reg_setup, NULL, 0, 1);
+#endif
+#endif /* __powerpc64__ */
+
+ return 0;
+}
+
+static void op_powerpc_shutdown(void)
+{
+#ifdef __powerpc64__
+ release_pmc_hardware();
+#else /* __powerpc64__ */
+ mb();
+ /* Remove our interrupt handler. We may be removing this module. */
+ free_perfmon_irq();
+#endif /* __powerpc64__ */
+}
+
+static void op_powerpc_cpu_start(void *dummy)
+{
+ model->start(ctr);
+}
+
+static int op_powerpc_start(void)
+{
+ on_each_cpu(op_powerpc_cpu_start, NULL, 0, 1);
+ return 0;
+}
+
+static inline void op_powerpc_cpu_stop(void *dummy)
+{
+ model->stop();
+}
+
+static void op_powerpc_stop(void)
+{
+ on_each_cpu(op_powerpc_cpu_stop, NULL, 0, 1);
+}
+
+static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
+{
+ int i;
+
+#ifdef __powerpc64__
+ /*
+ * There is one mmcr0, mmcr1 and mmcra for setting the events for
+ * all of the counters.
+ */
+ oprofilefs_create_ulong(sb, root, "mmcr0", &sys.mmcr0);
+ oprofilefs_create_ulong(sb, root, "mmcr1", &sys.mmcr1);
+ oprofilefs_create_ulong(sb, root, "mmcra", &sys.mmcra);
+#endif /* __powerpc64__ */
+
+ for (i = 0; i < model->num_counters; ++i) {
+ struct dentry *dir;
+ char buf[3];
+
+ snprintf(buf, sizeof buf, "%d", i);
+ dir = oprofilefs_mkdir(sb, root, buf);
+
+ oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
+ oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
+ oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
+#ifdef __powerpc64__
+ /*
+ * We dont support per counter user/kernel selection, but
+ * we leave the entries because userspace expects them
+ */
+#endif /* __powerpc64__ */
+ oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
+ oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
+
+#ifndef __powerpc64__
+ /* FIXME: Not sure if this is used */
+#endif /* ! __powerpc64__ */
+ oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
+ }
+
+ oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
+ oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
+#ifdef __powerpc64__
+ oprofilefs_create_ulong(sb, root, "backtrace_spinlocks",
+ &sys.backtrace_spinlocks);
+#endif /* __powerpc64__ */
+
+ /* Default to tracing both kernel and user */
+ sys.enable_kernel = 1;
+ sys.enable_user = 1;
+#ifdef __powerpc64__
+ /* Turn on backtracing through spinlocks by default */
+ sys.backtrace_spinlocks = 1;
+#endif /* __powerpc64__ */
+
+ return 0;
+}
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+#ifndef __powerpc64__
+ int cpu_id = smp_processor_id();
+
+#ifdef CONFIG_FSL_BOOKE
+ model = &op_model_fsl_booke;
+#else
+ return -ENODEV;
+#endif
+
+ cpu_type = kmalloc(32, GFP_KERNEL);
+ if (NULL == cpu_type)
+ return -ENOMEM;
+
+ sprintf(cpu_type, "ppc/%s", cur_cpu_spec[cpu_id]->cpu_name);
+
+ model->num_counters = cur_cpu_spec[cpu_id]->num_pmcs;
+
+ ops->cpu_type = cpu_type;
+#else /* __powerpc64__ */
+ if (!cur_cpu_spec->oprofile_model || !cur_cpu_spec->oprofile_cpu_type)
+ return -ENODEV;
+ model = cur_cpu_spec->oprofile_model;
+ model->num_counters = cur_cpu_spec->num_pmcs;
+
+ ops->cpu_type = cur_cpu_spec->oprofile_cpu_type;
+#endif /* __powerpc64__ */
+ ops->create_files = op_powerpc_create_files;
+ ops->setup = op_powerpc_setup;
+ ops->shutdown = op_powerpc_shutdown;
+ ops->start = op_powerpc_start;
+ ops->stop = op_powerpc_stop;
+
+ printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
+ ops->cpu_type);
+
+ return 0;
+}
+
+void oprofile_arch_exit(void)
+{
+#ifndef __powerpc64__
+ kfree(cpu_type);
+ cpu_type = NULL;
+#endif /* ! __powerpc64__ */
+}
diff --git a/arch/powerpc/oprofile/op_model_fsl_booke.c b/arch/powerpc/oprofile/op_model_fsl_booke.c
new file mode 100644
--- /dev/null
+++ b/arch/powerpc/oprofile/op_model_fsl_booke.c
@@ -0,0 +1,183 @@
+/*
+ * oprofile/op_model_e500.c
+ *
+ * Freescale Book-E oprofile support, based on ppc64 oprofile support
+ * Copyright (C) 2004 Anton Blanchard <anton at au.ibm.com>, IBM
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc
+ *
+ * Author: Andy Fleming
+ * Maintainer: Kumar Gala <Kumar.Gala at freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/cputable.h>
+#include <asm/reg_booke.h>
+#include <asm/page.h>
+#include <asm/perfmon.h>
+#include <asm/oprofile_impl.h>
+
+static unsigned long reset_value[OP_MAX_COUNTER];
+
+static int num_counters;
+static int oprofile_running;
+
+static inline unsigned int ctr_read(unsigned int i)
+{
+ switch(i) {
+ case 0:
+ return mfpmr(PMRN_PMC0);
+ case 1:
+ return mfpmr(PMRN_PMC1);
+ case 2:
+ return mfpmr(PMRN_PMC2);
+ case 3:
+ return mfpmr(PMRN_PMC3);
+ default:
+ return 0;
+ }
+}
+
+static inline void ctr_write(unsigned int i, unsigned int val)
+{
+ switch(i) {
+ case 0:
+ mtpmr(PMRN_PMC0, val);
+ break;
+ case 1:
+ mtpmr(PMRN_PMC1, val);
+ break;
+ case 2:
+ mtpmr(PMRN_PMC2, val);
+ break;
+ case 3:
+ mtpmr(PMRN_PMC3, val);
+ break;
+ default:
+ break;
+ }
+}
+
+
+static void fsl_booke_reg_setup(struct op_counter_config *ctr,
+ struct op_system_config *sys,
+ int num_ctrs)
+{
+ int i;
+
+ num_counters = num_ctrs;
+
+ /* freeze all counters */
+ pmc_stop_ctrs();
+
+ /* Our counters count up, and "count" refers to
+ * how much before the next interrupt, and we interrupt
+ * on overflow. So we calculate the starting value
+ * which will give us "count" until overflow.
+ * Then we set the events on the enabled counters */
+ for (i = 0; i < num_counters; ++i) {
+ reset_value[i] = 0x80000000UL - ctr[i].count;
+
+ init_pmc_stop(i);
+
+ set_pmc_event(i, ctr[i].event);
+
+ set_pmc_user_kernel(i, ctr[i].user, ctr[i].kernel);
+ }
+}
+
+static void fsl_booke_start(struct op_counter_config *ctr)
+{
+ int i;
+
+ mtmsr(mfmsr() | MSR_PMM);
+
+ for (i = 0; i < num_counters; ++i) {
+ if (ctr[i].enabled) {
+ ctr_write(i, reset_value[i]);
+ /* Set Each enabled counterd to only
+ * count when the Mark bit is not set */
+ set_pmc_marked(i, 1, 0);
+ pmc_start_ctr(i, 1);
+ } else {
+ ctr_write(i, 0);
+
+ /* Set the ctr to be stopped */
+ pmc_start_ctr(i, 0);
+ }
+ }
+
+ /* Clear the freeze bit, and enable the interrupt.
+ * The counters won't actually start until the rfi clears
+ * the PMM bit */
+ pmc_start_ctrs(1);
+
+ oprofile_running = 1;
+
+ pr_debug("start on cpu %d, pmgc0 %x\n", smp_processor_id(),
+ mfpmr(PMRN_PMGC0));
+}
+
+static void fsl_booke_stop(void)
+{
+ /* freeze counters */
+ pmc_stop_ctrs();
+
+ oprofile_running = 0;
+
+ pr_debug("stop on cpu %d, pmgc0 %x\n", smp_processor_id(),
+ mfpmr(PMRN_PMGC0));
+
+ mb();
+}
+
+
+static void fsl_booke_handle_interrupt(struct pt_regs *regs,
+ struct op_counter_config *ctr)
+{
+ unsigned long pc;
+ int is_kernel;
+ int val;
+ int i;
+
+ /* set the PMM bit (see comment below) */
+ mtmsr(mfmsr() | MSR_PMM);
+
+ pc = regs->nip;
+ is_kernel = (pc >= KERNELBASE);
+
+ for (i = 0; i < num_counters; ++i) {
+ val = ctr_read(i);
+ if (val < 0) {
+ if (oprofile_running && ctr[i].enabled) {
+ oprofile_add_pc(pc, is_kernel, i);
+ ctr_write(i, reset_value[i]);
+ } else {
+ ctr_write(i, 0);
+ }
+ }
+ }
+
+ /* The freeze bit was set by the interrupt. */
+ /* Clear the freeze bit, and reenable the interrupt.
+ * The counters won't actually start until the rfi clears
+ * the PMM bit */
+ pmc_start_ctrs(1);
+}
+
+struct op_powerpc_model op_model_fsl_booke = {
+ .reg_setup = fsl_booke_reg_setup,
+ .start = fsl_booke_start,
+ .stop = fsl_booke_stop,
+ .handle_interrupt = fsl_booke_handle_interrupt,
+};
diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
new file mode 100644
--- /dev/null
+++ b/arch/powerpc/oprofile/op_model_power4.c
@@ -0,0 +1,309 @@
+/*
+ * Copyright (C) 2004 Anton Blanchard <anton at au.ibm.com>, IBM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/cputable.h>
+#include <asm/systemcfg.h>
+#include <asm/rtas.h>
+#include <asm/oprofile_impl.h>
+
+#define dbg(args...)
+
+static unsigned long reset_value[OP_MAX_COUNTER];
+
+static int oprofile_running;
+static int mmcra_has_sihv;
+
+/* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
+static u32 mmcr0_val;
+static u64 mmcr1_val;
+static u32 mmcra_val;
+
+/*
+ * Since we do not have an NMI, backtracing through spinlocks is
+ * only a best guess. In light of this, allow it to be disabled at
+ * runtime.
+ */
+static int backtrace_spinlocks;
+
+static void power4_reg_setup(struct op_counter_config *ctr,
+ struct op_system_config *sys,
+ int num_ctrs)
+{
+ int i;
+
+ /*
+ * SIHV / SIPR bits are only implemented on POWER4+ (GQ) and above.
+ * However we disable it on all POWER4 until we verify it works
+ * (I was seeing some strange behaviour last time I tried).
+ *
+ * It has been verified to work on POWER5 so we enable it there.
+ */
+ if (cpu_has_feature(CPU_FTR_MMCRA_SIHV))
+ mmcra_has_sihv = 1;
+
+ /*
+ * The performance counter event settings are given in the mmcr0,
+ * mmcr1 and mmcra values passed from the user in the
+ * op_system_config structure (sys variable).
+ */
+ mmcr0_val = sys->mmcr0;
+ mmcr1_val = sys->mmcr1;
+ mmcra_val = sys->mmcra;
+
+ backtrace_spinlocks = sys->backtrace_spinlocks;
+
+ for (i = 0; i < cur_cpu_spec->num_pmcs; ++i)
+ reset_value[i] = 0x80000000UL - ctr[i].count;
+
+ /* setup user and kernel profiling */
+ if (sys->enable_kernel)
+ mmcr0_val &= ~MMCR0_KERNEL_DISABLE;
+ else
+ mmcr0_val |= MMCR0_KERNEL_DISABLE;
+
+ if (sys->enable_user)
+ mmcr0_val &= ~MMCR0_PROBLEM_DISABLE;
+ else
+ mmcr0_val |= MMCR0_PROBLEM_DISABLE;
+}
+
+extern void ppc64_enable_pmcs(void);
+
+static void power4_cpu_setup(void *unused)
+{
+ unsigned int mmcr0 = mmcr0_val;
+ unsigned long mmcra = mmcra_val;
+
+ ppc64_enable_pmcs();
+
+ /* set the freeze bit */
+ mmcr0 |= MMCR0_FC;
+ mtspr(SPRN_MMCR0, mmcr0);
+
+ mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE;
+ mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE;
+ mtspr(SPRN_MMCR0, mmcr0);
+
+ mtspr(SPRN_MMCR1, mmcr1_val);
+
+ mmcra |= MMCRA_SAMPLE_ENABLE;
+ mtspr(SPRN_MMCRA, mmcra);
+
+ dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(),
+ mfspr(SPRN_MMCR0));
+ dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(),
+ mfspr(SPRN_MMCR1));
+ dbg("setup on cpu %d, mmcra %lx\n", smp_processor_id(),
+ mfspr(SPRN_MMCRA));
+}
+
+static void power4_start(struct op_counter_config *ctr)
+{
+ int i;
+ unsigned int mmcr0;
+
+ /* set the PMM bit (see comment below) */
+ mtmsrd(mfmsr() | MSR_PMM);
+
+ for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) {
+ if (ctr[i].enabled) {
+ ctr_write(i, reset_value[i]);
+ } else {
+ ctr_write(i, 0);
+ }
+ }
+
+ mmcr0 = mfspr(SPRN_MMCR0);
+
+ /*
+ * We must clear the PMAO bit on some (GQ) chips. Just do it
+ * all the time
+ */
+ mmcr0 &= ~MMCR0_PMAO;
+
+ /*
+ * now clear the freeze bit, counting will not start until we
+ * rfid from this excetion, because only at that point will
+ * the PMM bit be cleared
+ */
+ mmcr0 &= ~MMCR0_FC;
+ mtspr(SPRN_MMCR0, mmcr0);
+
+ oprofile_running = 1;
+
+ dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
+}
+
+static void power4_stop(void)
+{
+ unsigned int mmcr0;
+
+ /* freeze counters */
+ mmcr0 = mfspr(SPRN_MMCR0);
+ mmcr0 |= MMCR0_FC;
+ mtspr(SPRN_MMCR0, mmcr0);
+
+ oprofile_running = 0;
+
+ dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
+
+ mb();
+}
+
+/* Fake functions used by canonicalize_pc */
+static void __attribute_used__ hypervisor_bucket(void)
+{
+}
+
+static void __attribute_used__ rtas_bucket(void)
+{
+}
+
+static void __attribute_used__ kernel_unknown_bucket(void)
+{
+}
+
+static unsigned long check_spinlock_pc(struct pt_regs *regs,
+ unsigned long profile_pc)
+{
+ unsigned long pc = instruction_pointer(regs);
+
+ /*
+ * If both the SIAR (sampled instruction) and the perfmon exception
+ * occurred in a spinlock region then we account the sample to the
+ * calling function. This isnt 100% correct, we really need soft
+ * IRQ disable so we always get the perfmon exception at the
+ * point at which the SIAR is set.
+ */
+ if (backtrace_spinlocks && in_lock_functions(pc) &&
+ in_lock_functions(profile_pc))
+ return regs->link;
+ else
+ return profile_pc;
+}
+
+/*
+ * On GQ and newer the MMCRA stores the HV and PR bits at the time
+ * the SIAR was sampled. We use that to work out if the SIAR was sampled in
+ * the hypervisor, our exception vectors or RTAS.
+ */
+static unsigned long get_pc(struct pt_regs *regs)
+{
+ unsigned long pc = mfspr(SPRN_SIAR);
+ unsigned long mmcra;
+
+ /* Cant do much about it */
+ if (!mmcra_has_sihv)
+ return check_spinlock_pc(regs, pc);
+
+ mmcra = mfspr(SPRN_MMCRA);
+
+ /* Were we in the hypervisor? */
+ if ((systemcfg->platform == PLATFORM_PSERIES_LPAR) &&
+ (mmcra & MMCRA_SIHV))
+ /* function descriptor madness */
+ return *((unsigned long *)hypervisor_bucket);
+
+ /* We were in userspace, nothing to do */
+ if (mmcra & MMCRA_SIPR)
+ return pc;
+
+#ifdef CONFIG_PPC_RTAS
+ /* Were we in RTAS? */
+ if (pc >= rtas.base && pc < (rtas.base + rtas.size))
+ /* function descriptor madness */
+ return *((unsigned long *)rtas_bucket);
+#endif
+
+ /* Were we in our exception vectors or SLB real mode miss handler? */
+ if (pc < 0x1000000UL)
+ return (unsigned long)__va(pc);
+
+ /* Not sure where we were */
+ if (pc < KERNELBASE)
+ /* function descriptor madness */
+ return *((unsigned long *)kernel_unknown_bucket);
+
+ return check_spinlock_pc(regs, pc);
+}
+
+static int get_kernel(unsigned long pc)
+{
+ int is_kernel;
+
+ if (!mmcra_has_sihv) {
+ is_kernel = (pc >= KERNELBASE);
+ } else {
+ unsigned long mmcra = mfspr(SPRN_MMCRA);
+ is_kernel = ((mmcra & MMCRA_SIPR) == 0);
+ }
+
+ return is_kernel;
+}
+
+static void power4_handle_interrupt(struct pt_regs *regs,
+ struct op_counter_config *ctr)
+{
+ unsigned long pc;
+ int is_kernel;
+ int val;
+ int i;
+ unsigned int mmcr0;
+
+ pc = get_pc(regs);
+ is_kernel = get_kernel(pc);
+
+ /* set the PMM bit (see comment below) */
+ mtmsrd(mfmsr() | MSR_PMM);
+
+ for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) {
+ val = ctr_read(i);
+ if (val < 0) {
+ if (oprofile_running && ctr[i].enabled) {
+ oprofile_add_pc(pc, is_kernel, i);
+ ctr_write(i, reset_value[i]);
+ } else {
+ ctr_write(i, 0);
+ }
+ }
+ }
+
+ mmcr0 = mfspr(SPRN_MMCR0);
+
+ /* reset the perfmon trigger */
+ mmcr0 |= MMCR0_PMXE;
+
+ /*
+ * We must clear the PMAO bit on some (GQ) chips. Just do it
+ * all the time
+ */
+ mmcr0 &= ~MMCR0_PMAO;
+
+ /*
+ * now clear the freeze bit, counting will not start until we
+ * rfid from this exception, because only at that point will
+ * the PMM bit be cleared
+ */
+ mmcr0 &= ~MMCR0_FC;
+ mtspr(SPRN_MMCR0, mmcr0);
+}
+
+struct op_powerpc_model op_model_power4 = {
+ .reg_setup = power4_reg_setup,
+ .cpu_setup = power4_cpu_setup,
+ .start = power4_start,
+ .stop = power4_stop,
+ .handle_interrupt = power4_handle_interrupt,
+};
diff --git a/arch/powerpc/oprofile/op_model_rs64.c b/arch/powerpc/oprofile/op_model_rs64.c
new file mode 100644
--- /dev/null
+++ b/arch/powerpc/oprofile/op_model_rs64.c
@@ -0,0 +1,218 @@
+/*
+ * Copyright (C) 2004 Anton Blanchard <anton at au.ibm.com>, IBM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/cputable.h>
+#include <asm/oprofile_impl.h>
+
+#define dbg(args...)
+
+static void ctrl_write(unsigned int i, unsigned int val)
+{
+ unsigned int tmp = 0;
+ unsigned long shift = 0, mask = 0;
+
+ dbg("ctrl_write %d %x\n", i, val);
+
+ switch(i) {
+ case 0:
+ tmp = mfspr(SPRN_MMCR0);
+ shift = 6;
+ mask = 0x7F;
+ break;
+ case 1:
+ tmp = mfspr(SPRN_MMCR0);
+ shift = 0;
+ mask = 0x3F;
+ break;
+ case 2:
+ tmp = mfspr(SPRN_MMCR1);
+ shift = 31 - 4;
+ mask = 0x1F;
+ break;
+ case 3:
+ tmp = mfspr(SPRN_MMCR1);
+ shift = 31 - 9;
+ mask = 0x1F;
+ break;
+ case 4:
+ tmp = mfspr(SPRN_MMCR1);
+ shift = 31 - 14;
+ mask = 0x1F;
+ break;
+ case 5:
+ tmp = mfspr(SPRN_MMCR1);
+ shift = 31 - 19;
+ mask = 0x1F;
+ break;
+ case 6:
+ tmp = mfspr(SPRN_MMCR1);
+ shift = 31 - 24;
+ mask = 0x1F;
+ break;
+ case 7:
+ tmp = mfspr(SPRN_MMCR1);
+ shift = 31 - 28;
+ mask = 0xF;
+ break;
+ }
+
+ tmp = tmp & ~(mask << shift);
+ tmp |= val << shift;
+
+ switch(i) {
+ case 0:
+ case 1:
+ mtspr(SPRN_MMCR0, tmp);
+ break;
+ default:
+ mtspr(SPRN_MMCR1, tmp);
+ }
+
+ dbg("ctrl_write mmcr0 %lx mmcr1 %lx\n", mfspr(SPRN_MMCR0),
+ mfspr(SPRN_MMCR1));
+}
+
+static unsigned long reset_value[OP_MAX_COUNTER];
+
+static int num_counters;
+
+static void rs64_reg_setup(struct op_counter_config *ctr,
+ struct op_system_config *sys,
+ int num_ctrs)
+{
+ int i;
+
+ num_counters = num_ctrs;
+
+ for (i = 0; i < num_counters; ++i)
+ reset_value[i] = 0x80000000UL - ctr[i].count;
+
+ /* XXX setup user and kernel profiling */
+}
+
+static void rs64_cpu_setup(void *unused)
+{
+ unsigned int mmcr0;
+
+ /* reset MMCR0 and set the freeze bit */
+ mmcr0 = MMCR0_FC;
+ mtspr(SPRN_MMCR0, mmcr0);
+
+ /* reset MMCR1, MMCRA */
+ mtspr(SPRN_MMCR1, 0);
+
+ if (cpu_has_feature(CPU_FTR_MMCRA))
+ mtspr(SPRN_MMCRA, 0);
+
+ mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE;
+ /* Only applies to POWER3, but should be safe on RS64 */
+ mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE;
+ mtspr(SPRN_MMCR0, mmcr0);
+
+ dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(),
+ mfspr(SPRN_MMCR0));
+ dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(),
+ mfspr(SPRN_MMCR1));
+}
+
+static void rs64_start(struct op_counter_config *ctr)
+{
+ int i;
+ unsigned int mmcr0;
+
+ /* set the PMM bit (see comment below) */
+ mtmsrd(mfmsr() | MSR_PMM);
+
+ for (i = 0; i < num_counters; ++i) {
+ if (ctr[i].enabled) {
+ ctr_write(i, reset_value[i]);
+ ctrl_write(i, ctr[i].event);
+ } else {
+ ctr_write(i, 0);
+ }
+ }
+
+ mmcr0 = mfspr(SPRN_MMCR0);
+
+ /*
+ * now clear the freeze bit, counting will not start until we
+ * rfid from this excetion, because only at that point will
+ * the PMM bit be cleared
+ */
+ mmcr0 &= ~MMCR0_FC;
+ mtspr(SPRN_MMCR0, mmcr0);
+
+ dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
+}
+
+static void rs64_stop(void)
+{
+ unsigned int mmcr0;
+
+ /* freeze counters */
+ mmcr0 = mfspr(SPRN_MMCR0);
+ mmcr0 |= MMCR0_FC;
+ mtspr(SPRN_MMCR0, mmcr0);
+
+ dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
+
+ mb();
+}
+
+static void rs64_handle_interrupt(struct pt_regs *regs,
+ struct op_counter_config *ctr)
+{
+ unsigned int mmcr0;
+ int val;
+ int i;
+ unsigned long pc = mfspr(SPRN_SIAR);
+ int is_kernel = (pc >= KERNELBASE);
+
+ /* set the PMM bit (see comment below) */
+ mtmsrd(mfmsr() | MSR_PMM);
+
+ for (i = 0; i < num_counters; ++i) {
+ val = ctr_read(i);
+ if (val < 0) {
+ if (ctr[i].enabled) {
+ oprofile_add_pc(pc, is_kernel, i);
+ ctr_write(i, reset_value[i]);
+ } else {
+ ctr_write(i, 0);
+ }
+ }
+ }
+
+ mmcr0 = mfspr(SPRN_MMCR0);
+
+ /* reset the perfmon trigger */
+ mmcr0 |= MMCR0_PMXE;
+
+ /*
+ * now clear the freeze bit, counting will not start until we
+ * rfid from this exception, because only at that point will
+ * the PMM bit be cleared
+ */
+ mmcr0 &= ~MMCR0_FC;
+ mtspr(SPRN_MMCR0, mmcr0);
+}
+
+struct op_powerpc_model op_model_rs64 = {
+ .reg_setup = rs64_reg_setup,
+ .cpu_setup = rs64_cpu_setup,
+ .start = rs64_start,
+ .stop = rs64_stop,
+ .handle_interrupt = rs64_handle_interrupt,
+};
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
--- a/arch/ppc/Makefile
+++ b/arch/ppc/Makefile
@@ -71,7 +71,7 @@ drivers-$(CONFIG_8xx) += arch/ppc/8xx_i
drivers-$(CONFIG_4xx) += arch/ppc/4xx_io/
drivers-$(CONFIG_CPM2) += arch/ppc/8260_io/
-drivers-$(CONFIG_OPROFILE) += arch/ppc/oprofile/
+drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
diff --git a/arch/ppc/oprofile/Makefile b/arch/ppc/oprofile/Makefile
deleted file mode 100644
--- a/arch/ppc/oprofile/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-include arch/powerpc/oprofile/Makefile
diff --git a/arch/ppc/oprofile/common.c b/arch/ppc/oprofile/common.c
deleted file mode 100644
--- a/arch/ppc/oprofile/common.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * PPC 32 oprofile support
- * Based on PPC64 oprofile support
- * Copyright (C) 2004 Anton Blanchard <anton at au.ibm.com>, IBM
- *
- * Copyright (C) Freescale Semiconductor, Inc 2004
- *
- * Author: Andy Fleming
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/system.h>
-#include <asm/perfmon.h>
-#include <asm/cputable.h>
-#include <asm/oprofile_impl.h>
-
-static struct op_powerpc_model *model;
-
-static struct op_counter_config ctr[OP_MAX_COUNTER];
-static struct op_system_config sys;
-
-static void op_handle_interrupt(struct pt_regs *regs)
-{
- model->handle_interrupt(regs, ctr);
-}
-
-static int op_ppc32_setup(void)
-{
- /* Install our interrupt handler into the existing hook. */
- if(request_perfmon_irq(&op_handle_interrupt))
- return -EBUSY;
-
- mb();
-
- /* Pre-compute the values to stuff in the hardware registers. */
- model->reg_setup(ctr, &sys, model->num_counters);
-
-#if 0
- /* FIXME: Make multi-cpu work */
- /* Configure the registers on all cpus. */
- on_each_cpu(model->reg_setup, NULL, 0, 1);
-#endif
-
- return 0;
-}
-
-static void op_ppc32_shutdown(void)
-{
- mb();
-
- /* Remove our interrupt handler. We may be removing this module. */
- free_perfmon_irq();
-}
-
-static void op_ppc32_cpu_start(void *dummy)
-{
- model->start(ctr);
-}
-
-static int op_ppc32_start(void)
-{
- on_each_cpu(op_ppc32_cpu_start, NULL, 0, 1);
- return 0;
-}
-
-static inline void op_ppc32_cpu_stop(void *dummy)
-{
- model->stop();
-}
-
-static void op_ppc32_stop(void)
-{
- on_each_cpu(op_ppc32_cpu_stop, NULL, 0, 1);
-}
-
-static int op_ppc32_create_files(struct super_block *sb, struct dentry *root)
-{
- int i;
-
- for (i = 0; i < model->num_counters; ++i) {
- struct dentry *dir;
- char buf[3];
-
- snprintf(buf, sizeof buf, "%d", i);
- dir = oprofilefs_mkdir(sb, root, buf);
-
- oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
- oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
- oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
- oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
- oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
-
- /* FIXME: Not sure if this is used */
- oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
- }
-
- oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
- oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
-
- /* Default to tracing both kernel and user */
- sys.enable_kernel = 1;
- sys.enable_user = 1;
-
- return 0;
-}
-
-static struct oprofile_operations oprof_ppc32_ops = {
- .create_files = op_ppc32_create_files,
- .setup = op_ppc32_setup,
- .shutdown = op_ppc32_shutdown,
- .start = op_ppc32_start,
- .stop = op_ppc32_stop,
- .cpu_type = NULL /* To be filled in below. */
-};
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
- char *name;
- int cpu_id = smp_processor_id();
-
-#ifdef CONFIG_FSL_BOOKE
- model = &op_model_fsl_booke;
-#else
- return -ENODEV;
-#endif
-
- name = kmalloc(32, GFP_KERNEL);
-
- if (NULL == name)
- return -ENOMEM;
-
- sprintf(name, "ppc/%s", cur_cpu_spec[cpu_id]->cpu_name);
-
- oprof_ppc32_ops.cpu_type = name;
-
- model->num_counters = cur_cpu_spec[cpu_id]->num_pmcs;
-
- *ops = oprof_ppc32_ops;
-
- printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
- oprof_ppc32_ops.cpu_type);
-
- return 0;
-}
-
-void oprofile_arch_exit(void)
-{
- kfree(oprof_ppc32_ops.cpu_type);
- oprof_ppc32_ops.cpu_type = NULL;
-}
diff --git a/arch/ppc/oprofile/op_model_fsl_booke.c b/arch/ppc/oprofile/op_model_fsl_booke.c
deleted file mode 100644
--- a/arch/ppc/oprofile/op_model_fsl_booke.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * oprofile/op_model_e500.c
- *
- * Freescale Book-E oprofile support, based on ppc64 oprofile support
- * Copyright (C) 2004 Anton Blanchard <anton at au.ibm.com>, IBM
- *
- * Copyright (c) 2004 Freescale Semiconductor, Inc
- *
- * Author: Andy Fleming
- * Maintainer: Kumar Gala <Kumar.Gala at freescale.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-#include <asm/system.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/reg_booke.h>
-#include <asm/page.h>
-#include <asm/perfmon.h>
-#include <asm/oprofile_impl.h>
-
-static unsigned long reset_value[OP_MAX_COUNTER];
-
-static int num_counters;
-static int oprofile_running;
-
-static inline unsigned int ctr_read(unsigned int i)
-{
- switch(i) {
- case 0:
- return mfpmr(PMRN_PMC0);
- case 1:
- return mfpmr(PMRN_PMC1);
- case 2:
- return mfpmr(PMRN_PMC2);
- case 3:
- return mfpmr(PMRN_PMC3);
- default:
- return 0;
- }
-}
-
-static inline void ctr_write(unsigned int i, unsigned int val)
-{
- switch(i) {
- case 0:
- mtpmr(PMRN_PMC0, val);
- break;
- case 1:
- mtpmr(PMRN_PMC1, val);
- break;
- case 2:
- mtpmr(PMRN_PMC2, val);
- break;
- case 3:
- mtpmr(PMRN_PMC3, val);
- break;
- default:
- break;
- }
-}
-
-
-static void fsl_booke_reg_setup(struct op_counter_config *ctr,
- struct op_system_config *sys,
- int num_ctrs)
-{
- int i;
-
- num_counters = num_ctrs;
-
- /* freeze all counters */
- pmc_stop_ctrs();
-
- /* Our counters count up, and "count" refers to
- * how much before the next interrupt, and we interrupt
- * on overflow. So we calculate the starting value
- * which will give us "count" until overflow.
- * Then we set the events on the enabled counters */
- for (i = 0; i < num_counters; ++i) {
- reset_value[i] = 0x80000000UL - ctr[i].count;
-
- init_pmc_stop(i);
-
- set_pmc_event(i, ctr[i].event);
-
- set_pmc_user_kernel(i, ctr[i].user, ctr[i].kernel);
- }
-}
-
-static void fsl_booke_start(struct op_counter_config *ctr)
-{
- int i;
-
- mtmsr(mfmsr() | MSR_PMM);
-
- for (i = 0; i < num_counters; ++i) {
- if (ctr[i].enabled) {
- ctr_write(i, reset_value[i]);
- /* Set Each enabled counterd to only
- * count when the Mark bit is not set */
- set_pmc_marked(i, 1, 0);
- pmc_start_ctr(i, 1);
- } else {
- ctr_write(i, 0);
-
- /* Set the ctr to be stopped */
- pmc_start_ctr(i, 0);
- }
- }
-
- /* Clear the freeze bit, and enable the interrupt.
- * The counters won't actually start until the rfi clears
- * the PMM bit */
- pmc_start_ctrs(1);
-
- oprofile_running = 1;
-
- pr_debug("start on cpu %d, pmgc0 %x\n", smp_processor_id(),
- mfpmr(PMRN_PMGC0));
-}
-
-static void fsl_booke_stop(void)
-{
- /* freeze counters */
- pmc_stop_ctrs();
-
- oprofile_running = 0;
-
- pr_debug("stop on cpu %d, pmgc0 %x\n", smp_processor_id(),
- mfpmr(PMRN_PMGC0));
-
- mb();
-}
-
-
-static void fsl_booke_handle_interrupt(struct pt_regs *regs,
- struct op_counter_config *ctr)
-{
- unsigned long pc;
- int is_kernel;
- int val;
- int i;
-
- /* set the PMM bit (see comment below) */
- mtmsr(mfmsr() | MSR_PMM);
-
- pc = regs->nip;
- is_kernel = (pc >= KERNELBASE);
-
- for (i = 0; i < num_counters; ++i) {
- val = ctr_read(i);
- if (val < 0) {
- if (oprofile_running && ctr[i].enabled) {
- oprofile_add_pc(pc, is_kernel, i);
- ctr_write(i, reset_value[i]);
- } else {
- ctr_write(i, 0);
- }
- }
- }
-
- /* The freeze bit was set by the interrupt. */
- /* Clear the freeze bit, and reenable the interrupt.
- * The counters won't actually start until the rfi clears
- * the PMM bit */
- pmc_start_ctrs(1);
-}
-
-struct op_powerpc_model op_model_fsl_booke = {
- .reg_setup = fsl_booke_reg_setup,
- .start = fsl_booke_start,
- .stop = fsl_booke_stop,
- .handle_interrupt = fsl_booke_handle_interrupt,
-};
diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile
--- a/arch/ppc64/Makefile
+++ b/arch/ppc64/Makefile
@@ -85,7 +85,7 @@ libs-y += arch/ppc64/lib/
core-y += arch/ppc64/kernel/
core-y += arch/ppc64/mm/
core-$(CONFIG_XMON) += arch/ppc64/xmon/
-drivers-$(CONFIG_OPROFILE) += arch/ppc64/oprofile/
+drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
boot := arch/ppc64/boot
diff --git a/arch/ppc64/oprofile/Makefile b/arch/ppc64/oprofile/Makefile
deleted file mode 100644
--- a/arch/ppc64/oprofile/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-include arch/powerpc/oprofile/Makefile
diff --git a/arch/ppc64/oprofile/common.c b/arch/ppc64/oprofile/common.c
deleted file mode 100644
--- a/arch/ppc64/oprofile/common.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Copyright (C) 2004 Anton Blanchard <anton at au.ibm.com>, IBM
- *
- * Based on alpha version.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/system.h>
-#include <asm/pmc.h>
-#include <asm/cputable.h>
-#include <asm/oprofile_impl.h>
-
-static struct op_powerpc_model *model;
-
-static struct op_counter_config ctr[OP_MAX_COUNTER];
-static struct op_system_config sys;
-
-static void op_handle_interrupt(struct pt_regs *regs)
-{
- model->handle_interrupt(regs, ctr);
-}
-
-static int op_ppc64_setup(void)
-{
- int err;
-
- /* Grab the hardware */
- err = reserve_pmc_hardware(op_handle_interrupt);
- if (err)
- return err;
-
- /* Pre-compute the values to stuff in the hardware registers. */
- model->reg_setup(ctr, &sys, model->num_counters);
-
- /* Configure the registers on all cpus. */
- on_each_cpu(model->cpu_setup, NULL, 0, 1);
-
- return 0;
-}
-
-static void op_ppc64_shutdown(void)
-{
- release_pmc_hardware();
-}
-
-static void op_ppc64_cpu_start(void *dummy)
-{
- model->start(ctr);
-}
-
-static int op_ppc64_start(void)
-{
- on_each_cpu(op_ppc64_cpu_start, NULL, 0, 1);
- return 0;
-}
-
-static inline void op_ppc64_cpu_stop(void *dummy)
-{
- model->stop();
-}
-
-static void op_ppc64_stop(void)
-{
- on_each_cpu(op_ppc64_cpu_stop, NULL, 0, 1);
-}
-
-static int op_ppc64_create_files(struct super_block *sb, struct dentry *root)
-{
- int i;
-
- /*
- * There is one mmcr0, mmcr1 and mmcra for setting the events for
- * all of the counters.
- */
- oprofilefs_create_ulong(sb, root, "mmcr0", &sys.mmcr0);
- oprofilefs_create_ulong(sb, root, "mmcr1", &sys.mmcr1);
- oprofilefs_create_ulong(sb, root, "mmcra", &sys.mmcra);
-
- for (i = 0; i < model->num_counters; ++i) {
- struct dentry *dir;
- char buf[3];
-
- snprintf(buf, sizeof buf, "%d", i);
- dir = oprofilefs_mkdir(sb, root, buf);
-
- oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
- oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
- oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
- /*
- * We dont support per counter user/kernel selection, but
- * we leave the entries because userspace expects them
- */
- oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
- oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
- oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
- }
-
- oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
- oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
- oprofilefs_create_ulong(sb, root, "backtrace_spinlocks",
- &sys.backtrace_spinlocks);
-
- /* Default to tracing both kernel and user */
- sys.enable_kernel = 1;
- sys.enable_user = 1;
-
- /* Turn on backtracing through spinlocks by default */
- sys.backtrace_spinlocks = 1;
-
- return 0;
-}
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
- if (!cur_cpu_spec->oprofile_model || !cur_cpu_spec->oprofile_cpu_type)
- return -ENODEV;
-
- model = cur_cpu_spec->oprofile_model;
- model->num_counters = cur_cpu_spec->num_pmcs;
-
- ops->cpu_type = cur_cpu_spec->oprofile_cpu_type;
- ops->create_files = op_ppc64_create_files;
- ops->setup = op_ppc64_setup;
- ops->shutdown = op_ppc64_shutdown;
- ops->start = op_ppc64_start;
- ops->stop = op_ppc64_stop;
-
- printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
- ops->cpu_type);
-
- return 0;
-}
-
-void oprofile_arch_exit(void)
-{
-}
diff --git a/arch/ppc64/oprofile/op_model_power4.c b/arch/ppc64/oprofile/op_model_power4.c
deleted file mode 100644
--- a/arch/ppc64/oprofile/op_model_power4.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- * Copyright (C) 2004 Anton Blanchard <anton at au.ibm.com>, IBM
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-#include <asm/system.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/systemcfg.h>
-#include <asm/rtas.h>
-#include <asm/oprofile_impl.h>
-
-#define dbg(args...)
-
-static unsigned long reset_value[OP_MAX_COUNTER];
-
-static int oprofile_running;
-static int mmcra_has_sihv;
-
-/* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
-static u32 mmcr0_val;
-static u64 mmcr1_val;
-static u32 mmcra_val;
-
-/*
- * Since we do not have an NMI, backtracing through spinlocks is
- * only a best guess. In light of this, allow it to be disabled at
- * runtime.
- */
-static int backtrace_spinlocks;
-
-static void power4_reg_setup(struct op_counter_config *ctr,
- struct op_system_config *sys,
- int num_ctrs)
-{
- int i;
-
- /*
- * SIHV / SIPR bits are only implemented on POWER4+ (GQ) and above.
- * However we disable it on all POWER4 until we verify it works
- * (I was seeing some strange behaviour last time I tried).
- *
- * It has been verified to work on POWER5 so we enable it there.
- */
- if (cpu_has_feature(CPU_FTR_MMCRA_SIHV))
- mmcra_has_sihv = 1;
-
- /*
- * The performance counter event settings are given in the mmcr0,
- * mmcr1 and mmcra values passed from the user in the
- * op_system_config structure (sys variable).
- */
- mmcr0_val = sys->mmcr0;
- mmcr1_val = sys->mmcr1;
- mmcra_val = sys->mmcra;
-
- backtrace_spinlocks = sys->backtrace_spinlocks;
-
- for (i = 0; i < cur_cpu_spec->num_pmcs; ++i)
- reset_value[i] = 0x80000000UL - ctr[i].count;
-
- /* setup user and kernel profiling */
- if (sys->enable_kernel)
- mmcr0_val &= ~MMCR0_KERNEL_DISABLE;
- else
- mmcr0_val |= MMCR0_KERNEL_DISABLE;
-
- if (sys->enable_user)
- mmcr0_val &= ~MMCR0_PROBLEM_DISABLE;
- else
- mmcr0_val |= MMCR0_PROBLEM_DISABLE;
-}
-
-extern void ppc64_enable_pmcs(void);
-
-static void power4_cpu_setup(void *unused)
-{
- unsigned int mmcr0 = mmcr0_val;
- unsigned long mmcra = mmcra_val;
-
- ppc64_enable_pmcs();
-
- /* set the freeze bit */
- mmcr0 |= MMCR0_FC;
- mtspr(SPRN_MMCR0, mmcr0);
-
- mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE;
- mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE;
- mtspr(SPRN_MMCR0, mmcr0);
-
- mtspr(SPRN_MMCR1, mmcr1_val);
-
- mmcra |= MMCRA_SAMPLE_ENABLE;
- mtspr(SPRN_MMCRA, mmcra);
-
- dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(),
- mfspr(SPRN_MMCR0));
- dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(),
- mfspr(SPRN_MMCR1));
- dbg("setup on cpu %d, mmcra %lx\n", smp_processor_id(),
- mfspr(SPRN_MMCRA));
-}
-
-static void power4_start(struct op_counter_config *ctr)
-{
- int i;
- unsigned int mmcr0;
-
- /* set the PMM bit (see comment below) */
- mtmsrd(mfmsr() | MSR_PMM);
-
- for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) {
- if (ctr[i].enabled) {
- ctr_write(i, reset_value[i]);
- } else {
- ctr_write(i, 0);
- }
- }
-
- mmcr0 = mfspr(SPRN_MMCR0);
-
- /*
- * We must clear the PMAO bit on some (GQ) chips. Just do it
- * all the time
- */
- mmcr0 &= ~MMCR0_PMAO;
-
- /*
- * now clear the freeze bit, counting will not start until we
- * rfid from this excetion, because only at that point will
- * the PMM bit be cleared
- */
- mmcr0 &= ~MMCR0_FC;
- mtspr(SPRN_MMCR0, mmcr0);
-
- oprofile_running = 1;
-
- dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
-}
-
-static void power4_stop(void)
-{
- unsigned int mmcr0;
-
- /* freeze counters */
- mmcr0 = mfspr(SPRN_MMCR0);
- mmcr0 |= MMCR0_FC;
- mtspr(SPRN_MMCR0, mmcr0);
-
- oprofile_running = 0;
-
- dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
-
- mb();
-}
-
-/* Fake functions used by canonicalize_pc */
-static void __attribute_used__ hypervisor_bucket(void)
-{
-}
-
-static void __attribute_used__ rtas_bucket(void)
-{
-}
-
-static void __attribute_used__ kernel_unknown_bucket(void)
-{
-}
-
-static unsigned long check_spinlock_pc(struct pt_regs *regs,
- unsigned long profile_pc)
-{
- unsigned long pc = instruction_pointer(regs);
-
- /*
- * If both the SIAR (sampled instruction) and the perfmon exception
- * occurred in a spinlock region then we account the sample to the
- * calling function. This isnt 100% correct, we really need soft
- * IRQ disable so we always get the perfmon exception at the
- * point at which the SIAR is set.
- */
- if (backtrace_spinlocks && in_lock_functions(pc) &&
- in_lock_functions(profile_pc))
- return regs->link;
- else
- return profile_pc;
-}
-
-/*
- * On GQ and newer the MMCRA stores the HV and PR bits at the time
- * the SIAR was sampled. We use that to work out if the SIAR was sampled in
- * the hypervisor, our exception vectors or RTAS.
- */
-static unsigned long get_pc(struct pt_regs *regs)
-{
- unsigned long pc = mfspr(SPRN_SIAR);
- unsigned long mmcra;
-
- /* Cant do much about it */
- if (!mmcra_has_sihv)
- return check_spinlock_pc(regs, pc);
-
- mmcra = mfspr(SPRN_MMCRA);
-
- /* Were we in the hypervisor? */
- if ((systemcfg->platform == PLATFORM_PSERIES_LPAR) &&
- (mmcra & MMCRA_SIHV))
- /* function descriptor madness */
- return *((unsigned long *)hypervisor_bucket);
-
- /* We were in userspace, nothing to do */
- if (mmcra & MMCRA_SIPR)
- return pc;
-
-#ifdef CONFIG_PPC_RTAS
- /* Were we in RTAS? */
- if (pc >= rtas.base && pc < (rtas.base + rtas.size))
- /* function descriptor madness */
- return *((unsigned long *)rtas_bucket);
-#endif
-
- /* Were we in our exception vectors or SLB real mode miss handler? */
- if (pc < 0x1000000UL)
- return (unsigned long)__va(pc);
-
- /* Not sure where we were */
- if (pc < KERNELBASE)
- /* function descriptor madness */
- return *((unsigned long *)kernel_unknown_bucket);
-
- return check_spinlock_pc(regs, pc);
-}
-
-static int get_kernel(unsigned long pc)
-{
- int is_kernel;
-
- if (!mmcra_has_sihv) {
- is_kernel = (pc >= KERNELBASE);
- } else {
- unsigned long mmcra = mfspr(SPRN_MMCRA);
- is_kernel = ((mmcra & MMCRA_SIPR) == 0);
- }
-
- return is_kernel;
-}
-
-static void power4_handle_interrupt(struct pt_regs *regs,
- struct op_counter_config *ctr)
-{
- unsigned long pc;
- int is_kernel;
- int val;
- int i;
- unsigned int mmcr0;
-
- pc = get_pc(regs);
- is_kernel = get_kernel(pc);
-
- /* set the PMM bit (see comment below) */
- mtmsrd(mfmsr() | MSR_PMM);
-
- for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) {
- val = ctr_read(i);
- if (val < 0) {
- if (oprofile_running && ctr[i].enabled) {
- oprofile_add_pc(pc, is_kernel, i);
- ctr_write(i, reset_value[i]);
- } else {
- ctr_write(i, 0);
- }
- }
- }
-
- mmcr0 = mfspr(SPRN_MMCR0);
-
- /* reset the perfmon trigger */
- mmcr0 |= MMCR0_PMXE;
-
- /*
- * We must clear the PMAO bit on some (GQ) chips. Just do it
- * all the time
- */
- mmcr0 &= ~MMCR0_PMAO;
-
- /*
- * now clear the freeze bit, counting will not start until we
- * rfid from this exception, because only at that point will
- * the PMM bit be cleared
- */
- mmcr0 &= ~MMCR0_FC;
- mtspr(SPRN_MMCR0, mmcr0);
-}
-
-struct op_powerpc_model op_model_power4 = {
- .reg_setup = power4_reg_setup,
- .cpu_setup = power4_cpu_setup,
- .start = power4_start,
- .stop = power4_stop,
- .handle_interrupt = power4_handle_interrupt,
-};
diff --git a/arch/ppc64/oprofile/op_model_rs64.c b/arch/ppc64/oprofile/op_model_rs64.c
deleted file mode 100644
--- a/arch/ppc64/oprofile/op_model_rs64.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * Copyright (C) 2004 Anton Blanchard <anton at au.ibm.com>, IBM
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-#include <asm/system.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/oprofile_impl.h>
-
-#define dbg(args...)
-
-static void ctrl_write(unsigned int i, unsigned int val)
-{
- unsigned int tmp = 0;
- unsigned long shift = 0, mask = 0;
-
- dbg("ctrl_write %d %x\n", i, val);
-
- switch(i) {
- case 0:
- tmp = mfspr(SPRN_MMCR0);
- shift = 6;
- mask = 0x7F;
- break;
- case 1:
- tmp = mfspr(SPRN_MMCR0);
- shift = 0;
- mask = 0x3F;
- break;
- case 2:
- tmp = mfspr(SPRN_MMCR1);
- shift = 31 - 4;
- mask = 0x1F;
- break;
- case 3:
- tmp = mfspr(SPRN_MMCR1);
- shift = 31 - 9;
- mask = 0x1F;
- break;
- case 4:
- tmp = mfspr(SPRN_MMCR1);
- shift = 31 - 14;
- mask = 0x1F;
- break;
- case 5:
- tmp = mfspr(SPRN_MMCR1);
- shift = 31 - 19;
- mask = 0x1F;
- break;
- case 6:
- tmp = mfspr(SPRN_MMCR1);
- shift = 31 - 24;
- mask = 0x1F;
- break;
- case 7:
- tmp = mfspr(SPRN_MMCR1);
- shift = 31 - 28;
- mask = 0xF;
- break;
- }
-
- tmp = tmp & ~(mask << shift);
- tmp |= val << shift;
-
- switch(i) {
- case 0:
- case 1:
- mtspr(SPRN_MMCR0, tmp);
- break;
- default:
- mtspr(SPRN_MMCR1, tmp);
- }
-
- dbg("ctrl_write mmcr0 %lx mmcr1 %lx\n", mfspr(SPRN_MMCR0),
- mfspr(SPRN_MMCR1));
-}
-
-static unsigned long reset_value[OP_MAX_COUNTER];
-
-static int num_counters;
-
-static void rs64_reg_setup(struct op_counter_config *ctr,
- struct op_system_config *sys,
- int num_ctrs)
-{
- int i;
-
- num_counters = num_ctrs;
-
- for (i = 0; i < num_counters; ++i)
- reset_value[i] = 0x80000000UL - ctr[i].count;
-
- /* XXX setup user and kernel profiling */
-}
-
-static void rs64_cpu_setup(void *unused)
-{
- unsigned int mmcr0;
-
- /* reset MMCR0 and set the freeze bit */
- mmcr0 = MMCR0_FC;
- mtspr(SPRN_MMCR0, mmcr0);
-
- /* reset MMCR1, MMCRA */
- mtspr(SPRN_MMCR1, 0);
-
- if (cpu_has_feature(CPU_FTR_MMCRA))
- mtspr(SPRN_MMCRA, 0);
-
- mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE;
- /* Only applies to POWER3, but should be safe on RS64 */
- mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE;
- mtspr(SPRN_MMCR0, mmcr0);
-
- dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(),
- mfspr(SPRN_MMCR0));
- dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(),
- mfspr(SPRN_MMCR1));
-}
-
-static void rs64_start(struct op_counter_config *ctr)
-{
- int i;
- unsigned int mmcr0;
-
- /* set the PMM bit (see comment below) */
- mtmsrd(mfmsr() | MSR_PMM);
-
- for (i = 0; i < num_counters; ++i) {
- if (ctr[i].enabled) {
- ctr_write(i, reset_value[i]);
- ctrl_write(i, ctr[i].event);
- } else {
- ctr_write(i, 0);
- }
- }
-
- mmcr0 = mfspr(SPRN_MMCR0);
-
- /*
- * now clear the freeze bit, counting will not start until we
- * rfid from this excetion, because only at that point will
- * the PMM bit be cleared
- */
- mmcr0 &= ~MMCR0_FC;
- mtspr(SPRN_MMCR0, mmcr0);
-
- dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
-}
-
-static void rs64_stop(void)
-{
- unsigned int mmcr0;
-
- /* freeze counters */
- mmcr0 = mfspr(SPRN_MMCR0);
- mmcr0 |= MMCR0_FC;
- mtspr(SPRN_MMCR0, mmcr0);
-
- dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
-
- mb();
-}
-
-static void rs64_handle_interrupt(struct pt_regs *regs,
- struct op_counter_config *ctr)
-{
- unsigned int mmcr0;
- int val;
- int i;
- unsigned long pc = mfspr(SPRN_SIAR);
- int is_kernel = (pc >= KERNELBASE);
-
- /* set the PMM bit (see comment below) */
- mtmsrd(mfmsr() | MSR_PMM);
-
- for (i = 0; i < num_counters; ++i) {
- val = ctr_read(i);
- if (val < 0) {
- if (ctr[i].enabled) {
- oprofile_add_pc(pc, is_kernel, i);
- ctr_write(i, reset_value[i]);
- } else {
- ctr_write(i, 0);
- }
- }
- }
-
- mmcr0 = mfspr(SPRN_MMCR0);
-
- /* reset the perfmon trigger */
- mmcr0 |= MMCR0_PMXE;
-
- /*
- * now clear the freeze bit, counting will not start until we
- * rfid from this exception, because only at that point will
- * the PMM bit be cleared
- */
- mmcr0 &= ~MMCR0_FC;
- mtspr(SPRN_MMCR0, mmcr0);
-}
-
-struct op_powerpc_model op_model_rs64 = {
- .reg_setup = rs64_reg_setup,
- .cpu_setup = rs64_cpu_setup,
- .start = rs64_start,
- .stop = rs64_stop,
- .handle_interrupt = rs64_handle_interrupt,
-};
More information about the Linuxppc-dev
mailing list