[patch 25/43] ppc64 boot: remove zlib

akpm at osdl.org akpm at osdl.org
Sat Oct 29 10:46:38 EST 2005


From: Olaf Hering <olh at suse.de>

Switch ppc64 to the in-kernel zlib, it has less bugs than the current one.
The code in arch/ppc64/boot is compiled as 32bit, so it can not use the
includes from include/asm.

Copy all zlib related header files and convert them with sed.

Reduce the scratch size to 47k, check possible changes at runtime.

Signed-off-by: Olaf Hering <olh at suse.de>
Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
Cc: Anton Blanchard <anton at samba.org>
Cc: Paul Mackerras <paulus at samba.org>
Signed-off-by: Andrew Morton <akpm at osdl.org>
---

 dev/null                 | 2627 -----------------------------------------------
 arch/ppc64/boot/Makefile |   33 
 arch/ppc64/boot/main.c   |   82 -
 3 files changed, 44 insertions(+), 2698 deletions(-)

diff -puN arch/ppc64/boot/main.c~ppc64-boot-remove-zlib arch/ppc64/boot/main.c
--- devel/arch/ppc64/boot/main.c~ppc64-boot-remove-zlib	2005-10-28 17:44:04.000000000 -0700
+++ devel-akpm/arch/ppc64/boot/main.c	2005-10-28 17:45:22.000000000 -0700
@@ -26,12 +26,6 @@ extern void flush_cache(void *, unsigned
 #define RAM_END		(512<<20) // Fixme: use OF */
 #define	ONE_MB		0x100000
 
-static char *avail_ram;
-static char *begin_avail, *end_avail;
-static char *avail_high;
-static unsigned int heap_use;
-static unsigned int heap_max;
-
 extern char _start[];
 extern char _end[];
 extern char _vmlinux_start[];
@@ -50,7 +44,8 @@ static struct addr_range vmlinux = {0, 0
 static struct addr_range vmlinuz = {0, 0, 0};
 static struct addr_range initrd  = {0, 0, 0};
 
-static char scratch[128<<10];	/* 128kB of scratch space for gunzip */
+static char scratch[46912];	/* scratch space for gunzip, from zlib_inflate_workspacesize() */
+
 
 typedef void (*kernel_entry_t)( unsigned long,
                                 unsigned long,
@@ -161,17 +156,12 @@ void start(unsigned long a1, unsigned lo
 	/* Eventually gunzip the kernel */
 	if (*(unsigned short *)vmlinuz.addr == 0x1f8b) {
 		int len;
-		avail_ram = scratch;
-		begin_avail = avail_high = avail_ram;
-		end_avail = scratch + sizeof(scratch);
 		printf("gunzipping (0x%lx <- 0x%lx:0x%0lx)...",
 		       vmlinux.addr, vmlinuz.addr, vmlinuz.addr+vmlinuz.size);
 		len = vmlinuz.size;
 		gunzip((void *)vmlinux.addr, vmlinux.size,
 			(unsigned char *)vmlinuz.addr, &len);
 		printf("done 0x%lx bytes\n\r", len);
-		printf("0x%x bytes of heap consumed, max in use 0x%x\n\r",
-		       (unsigned)(avail_high - begin_avail), heap_max);
 	} else {
 		memmove((void *)vmlinux.addr,(void *)vmlinuz.addr,vmlinuz.size);
 	}
@@ -225,64 +215,12 @@ void start(unsigned long a1, unsigned lo
 	exit();
 }
 
-struct memchunk {
-	unsigned int size;
-	unsigned int pad;
-	struct memchunk *next;
-};
-
-static struct memchunk *freechunks;
-
-void *zalloc(void *x, unsigned items, unsigned size)
-{
-	void *p;
-	struct memchunk **mpp, *mp;
-
-	size *= items;
-	size = _ALIGN(size, sizeof(struct memchunk));
-	heap_use += size;
-	if (heap_use > heap_max)
-		heap_max = heap_use;
-	for (mpp = &freechunks; (mp = *mpp) != 0; mpp = &mp->next) {
-		if (mp->size == size) {
-			*mpp = mp->next;
-			return mp;
-		}
-	}
-	p = avail_ram;
-	avail_ram += size;
-	if (avail_ram > avail_high)
-		avail_high = avail_ram;
-	if (avail_ram > end_avail) {
-		printf("oops... out of memory\n\r");
-		pause();
-	}
-	return p;
-}
-
-void zfree(void *x, void *addr, unsigned nb)
-{
-	struct memchunk *mp = addr;
-
-	nb = _ALIGN(nb, sizeof(struct memchunk));
-	heap_use -= nb;
-	if (avail_ram == addr + nb) {
-		avail_ram = addr;
-		return;
-	}
-	mp->size = nb;
-	mp->next = freechunks;
-	freechunks = mp;
-}
-
 #define HEAD_CRC	2
 #define EXTRA_FIELD	4
 #define ORIG_NAME	8
 #define COMMENT		0x10
 #define RESERVED	0xe0
 
-#define DEFLATED	8
-
 static void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
 {
 	z_stream s;
@@ -291,7 +229,7 @@ static void gunzip(void *dst, int dstlen
 	/* skip header */
 	i = 10;
 	flags = src[3];
-	if (src[2] != DEFLATED || (flags & RESERVED) != 0) {
+	if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) {
 		printf("bad gzipped data\n\r");
 		exit();
 	}
@@ -310,9 +248,13 @@ static void gunzip(void *dst, int dstlen
 		exit();
 	}
 
-	s.zalloc = zalloc;
-	s.zfree = zfree;
-	r = inflateInit2(&s, -MAX_WBITS);
+	if (zlib_inflate_workspacesize() > sizeof(scratch)) {
+		printf("gunzip needs more mem\n");
+		exit();
+	}
+	memset(&s, 0, sizeof(s));
+	s.workspace = scratch;
+	r = zlib_inflateInit2(&s, -MAX_WBITS);
 	if (r != Z_OK) {
 		printf("inflateInit2 returned %d\n\r", r);
 		exit();
@@ -321,12 +263,12 @@ static void gunzip(void *dst, int dstlen
 	s.avail_in = *lenp - i;
 	s.next_out = dst;
 	s.avail_out = dstlen;
-	r = inflate(&s, Z_FINISH);
+	r = zlib_inflate(&s, Z_FINISH);
 	if (r != Z_OK && r != Z_STREAM_END) {
 		printf("inflate returned %d msg: %s\n\r", r, s.msg);
 		exit();
 	}
 	*lenp = s.next_out - (unsigned char *) dst;
-	inflateEnd(&s);
+	zlib_inflateEnd(&s);
 }
 
diff -puN arch/ppc64/boot/Makefile~ppc64-boot-remove-zlib arch/ppc64/boot/Makefile
--- devel/arch/ppc64/boot/Makefile~ppc64-boot-remove-zlib	2005-10-28 17:44:04.000000000 -0700
+++ devel-akpm/arch/ppc64/boot/Makefile	2005-10-28 17:45:22.000000000 -0700
@@ -27,10 +27,41 @@ BOOTAFLAGS	:= -D__ASSEMBLY__ $(BOOTCFLAG
 BOOTLFLAGS	:= -Ttext 0x00400000 -e _start -T $(srctree)/$(src)/zImage.lds
 OBJCOPYFLAGS    := contents,alloc,load,readonly,data
 
-src-boot := crt0.S string.S prom.c main.c zlib.c imagesize.c div64.S
+zlib       := infblock.c infcodes.c inffast.c inflate.c inftrees.c infutil.c
+zlibheader := infblock.h infcodes.h inffast.h inftrees.h infutil.h
+zliblinuxheader := zlib.h zconf.h zutil.h
+
+$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
+#$(addprefix $(obj)/,main.o): $(addprefix $(obj)/,zlib.h)
+
+src-boot := crt0.S string.S prom.c main.c imagesize.c div64.S
+src-boot += $(zlib)
 src-boot := $(addprefix $(obj)/, $(src-boot))
 obj-boot := $(addsuffix .o, $(basename $(src-boot)))
 
+BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(obj)
+
+quiet_cmd_copy_zlib = COPY    $@
+      cmd_copy_zlib = sed "s at __attribute_used__@@;s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@
+
+quiet_cmd_copy_zlibheader = COPY    $@
+      cmd_copy_zlibheader = sed "s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@
+# stddef.h for NULL
+quiet_cmd_copy_zliblinuxheader = COPY    $@
+      cmd_copy_zliblinuxheader = sed "s@<linux/string.h>@\"string.h\"@;s@<linux/kernel.h>@<stddef.h>@;s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@
+
+$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
+	$(call cmd,copy_zlib)
+
+$(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
+	$(call cmd,copy_zlibheader)
+
+$(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
+	$(call cmd,copy_zliblinuxheader)
+
+clean-files := $(zlib) $(zlibheader) $(zliblinuxheader)
+
+
 quiet_cmd_bootcc = BOOTCC  $@
       cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
 
diff -L arch/ppc64/boot/zlib.c -puN arch/ppc64/boot/zlib.c~ppc64-boot-remove-zlib /dev/null
--- devel/arch/ppc64/boot/zlib.c
+++ /dev/null	2003-09-15 06:40:47.000000000 -0700
@@ -1,2195 +0,0 @@
-/*
- * This file is derived from various .h and .c files from the zlib-0.95
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.  See zlib.h for conditions of
- * distribution and use.
- *
- * Changes that have been made include:
- * - changed functions not used outside this file to "local"
- * - added minCompression parameter to deflateInit2
- * - added Z_PACKET_FLUSH (see zlib.h for details)
- * - added inflateIncomp
- *
-  Copyright (C) 1995 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  gzip at prep.ai.mit.edu    madler at alumni.caltech.edu
-
- *
- * 
- */
-
-/*+++++*/
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* From: zutil.h,v 1.9 1995/05/03 17:27:12 jloup Exp */
-
-#define _Z_UTIL_H
-
-#include "zlib.h"
-
-#ifndef local
-#  define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-#define FAR
-
-typedef unsigned char  uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long  ulg;
-
-extern char *z_errmsg[]; /* indexed by 1-zlib_error */
-
-#define ERR_RETURN(strm,err) return (strm->msg=z_errmsg[1-err], err)
-/* To be used only when the state is known to be valid */
-
-#ifndef NULL
-#define NULL	((void *) 0)
-#endif
-
-        /* common constants */
-
-#define DEFLATED   8
-
-#ifndef DEF_WBITS
-#  define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-#  define DEF_MEM_LEVEL 8
-#else
-#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES    2
-/* The three kinds of block type */
-
-#define MIN_MATCH  3
-#define MAX_MATCH  258
-/* The minimum and maximum match lengths */
-
-         /* functions */
-
-extern void *memcpy(void *, const void *, unsigned long);
-#define zmemcpy memcpy
-
-/* Diagnostic functions */
-#ifdef DEBUG_ZLIB
-#  include "stdio.h"
-#  ifndef verbose
-#    define verbose 0
-#  endif
-#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-
-typedef uLong (*check_func) OF((uLong check, Bytef *buf, uInt len));
-
-/* voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); */
-/* void   zcfree  OF((voidpf opaque, voidpf ptr)); */
-
-#define ZALLOC(strm, items, size) \
-           (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr, size)	\
-	   (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), (size))
-#define TRY_FREE(s, p, n) {if (p) ZFREE(s, p, n);}
-
-/* deflate.h -- internal compression state
- * Copyright (C) 1995 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/*+++++*/
-/* infblock.h -- header to use infblock.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_blocks_state;
-typedef struct inflate_blocks_state FAR inflate_blocks_statef;
-
-local inflate_blocks_statef * inflate_blocks_new OF((
-    z_stream *z,
-    check_func c,               /* check function */
-    uInt w));                   /* window size */
-
-local int inflate_blocks OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    int));                      /* initial return code */
-
-local void inflate_blocks_reset OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    uLongf *));                  /* check value on output */
-
-local int inflate_blocks_free OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    uLongf *));                  /* check value on output */
-
-local int inflate_addhistory OF((
-    inflate_blocks_statef *,
-    z_stream *));
-
-local int inflate_packet_flush OF((
-    inflate_blocks_statef *));
-
-/*+++++*/
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* Huffman code lookup table entry--this entry is four bytes for machines
-   that have 16-bit pointers (e.g. PC's in the small or medium model). */
-
-typedef struct inflate_huft_s FAR inflate_huft;
-
-struct inflate_huft_s {
-  union {
-    struct {
-      Byte Exop;        /* number of extra bits or operation */
-      Byte Bits;        /* number of bits in this code or subcode */
-    } what;
-    uInt Nalloc;	/* number of these allocated here */
-    Bytef *pad;         /* pad structure to a power of 2 (4 bytes for */
-  } word;               /*  16-bit, 8 bytes for 32-bit machines) */
-  union {
-    uInt Base;          /* literal, length base, or distance base */
-    inflate_huft *Next; /* pointer to next level of table */
-  } more;
-};
-
-#ifdef DEBUG_ZLIB
-  local uInt inflate_hufts;
-#endif
-
-local int inflate_trees_bits OF((
-    uIntf *,                    /* 19 code lengths */
-    uIntf *,                    /* bits tree desired/actual depth */
-    inflate_huft * FAR *,       /* bits tree result */
-    z_stream *));               /* for zalloc, zfree functions */
-
-local int inflate_trees_dynamic OF((
-    uInt,                       /* number of literal/length codes */
-    uInt,                       /* number of distance codes */
-    uIntf *,                    /* that many (total) code lengths */
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *,       /* distance tree result */
-    z_stream *));               /* for zalloc, zfree functions */
-
-local int inflate_trees_fixed OF((
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *));     /* distance tree result */
-
-local int inflate_trees_free OF((
-    inflate_huft *,             /* tables to free */
-    z_stream *));               /* for zfree function */
-
-
-/*+++++*/
-/* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_codes_state;
-typedef struct inflate_codes_state FAR inflate_codes_statef;
-
-local inflate_codes_statef *inflate_codes_new OF((
-    uInt, uInt,
-    inflate_huft *, inflate_huft *,
-    z_stream *));
-
-local int inflate_codes OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    int));
-
-local void inflate_codes_free OF((
-    inflate_codes_statef *,
-    z_stream *));
-
-
-/*+++++*/
-/* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* inflate private state */
-struct internal_state {
-
-  /* mode */
-  enum {
-      METHOD,   /* waiting for method byte */
-      FLAG,     /* waiting for flag byte */
-      BLOCKS,   /* decompressing blocks */
-      CHECK4,   /* four check bytes to go */
-      CHECK3,   /* three check bytes to go */
-      CHECK2,   /* two check bytes to go */
-      CHECK1,   /* one check byte to go */
-      DONE,     /* finished check, done */
-      BAD}      /* got an error--stay here */
-    mode;               /* current inflate mode */
-
-  /* mode dependent information */
-  union {
-    uInt method;        /* if FLAGS, method byte */
-    struct {
-      uLong was;                /* computed check value */
-      uLong need;               /* stream check value */
-    } check;            /* if CHECK, check values to compare */
-    uInt marker;        /* if BAD, inflateSync's marker bytes count */
-  } sub;        /* submode */
-
-  /* mode independent information */
-  int  nowrap;          /* flag for no wrapper */
-  uInt wbits;           /* log2(window size)  (8..15, defaults to 15) */
-  inflate_blocks_statef 
-    *blocks;            /* current inflate_blocks state */
-
-};
-
-
-int inflateReset(
-	z_stream *z
-)
-{
-  uLong c;
-
-  if (z == Z_NULL || z->state == Z_NULL)
-    return Z_STREAM_ERROR;
-  z->total_in = z->total_out = 0;
-  z->msg = Z_NULL;
-  z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
-  inflate_blocks_reset(z->state->blocks, z, &c);
-  Trace((stderr, "inflate: reset\n"));
-  return Z_OK;
-}
-
-
-int inflateEnd(
-	z_stream *z
-)
-{
-  uLong c;
-
-  if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
-    return Z_STREAM_ERROR;
-  if (z->state->blocks != Z_NULL)
-    inflate_blocks_free(z->state->blocks, z, &c);
-  ZFREE(z, z->state, sizeof(struct internal_state));
-  z->state = Z_NULL;
-  Trace((stderr, "inflate: end\n"));
-  return Z_OK;
-}
-
-
-int inflateInit2(
-	z_stream *z,
-	int w
-)
-{
-  /* initialize state */
-  if (z == Z_NULL)
-    return Z_STREAM_ERROR;
-/*  if (z->zalloc == Z_NULL) z->zalloc = zcalloc; */
-/*  if (z->zfree == Z_NULL) z->zfree = zcfree; */
-  if ((z->state = (struct internal_state FAR *)
-       ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
-    return Z_MEM_ERROR;
-  z->state->blocks = Z_NULL;
-
-  /* handle undocumented nowrap option (no zlib header or check) */
-  z->state->nowrap = 0;
-  if (w < 0)
-  {
-    w = - w;
-    z->state->nowrap = 1;
-  }
-
-  /* set window size */
-  if (w < 8 || w > 15)
-  {
-    inflateEnd(z);
-    return Z_STREAM_ERROR;
-  }
-  z->state->wbits = (uInt)w;
-
-  /* create inflate_blocks state */
-  if ((z->state->blocks =
-       inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, 1 << w))
-      == Z_NULL)
-  {
-    inflateEnd(z);
-    return Z_MEM_ERROR;
-  }
-  Trace((stderr, "inflate: allocated\n"));
-
-  /* reset state */
-  inflateReset(z);
-  return Z_OK;
-}
-
-
-int inflateInit(
-	z_stream *z
-)
-{
-  return inflateInit2(z, DEF_WBITS);
-}
-
-
-#define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;}
-#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
-
-int inflate(
-	z_stream *z,
-	int f	
-)
-{
-  int r;
-  uInt b;
-
-  if (z == Z_NULL || z->next_in == Z_NULL)
-    return Z_STREAM_ERROR;
-  r = Z_BUF_ERROR;
-  while (1) switch (z->state->mode)
-  {
-    case METHOD:
-      NEEDBYTE
-      if (((z->state->sub.method = NEXTBYTE) & 0xf) != DEFLATED)
-      {
-        z->state->mode = BAD;
-        z->msg = "unknown compression method";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
-      {
-        z->state->mode = BAD;
-        z->msg = "invalid window size";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      z->state->mode = FLAG;
-    case FLAG:
-      NEEDBYTE
-      if ((b = NEXTBYTE) & 0x20)
-      {
-        z->state->mode = BAD;
-        z->msg = "invalid reserved bit";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      if (((z->state->sub.method << 8) + b) % 31)
-      {
-        z->state->mode = BAD;
-        z->msg = "incorrect header check";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      Trace((stderr, "inflate: zlib header ok\n"));
-      z->state->mode = BLOCKS;
-    case BLOCKS:
-      r = inflate_blocks(z->state->blocks, z, r);
-      if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0)
-	  r = inflate_packet_flush(z->state->blocks);
-      if (r == Z_DATA_ERROR)
-      {
-        z->state->mode = BAD;
-        z->state->sub.marker = 0;       /* can try inflateSync */
-        break;
-      }
-      if (r != Z_STREAM_END)
-        return r;
-      r = Z_OK;
-      inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
-      if (z->state->nowrap)
-      {
-        z->state->mode = DONE;
-        break;
-      }
-      z->state->mode = CHECK4;
-    case CHECK4:
-      NEEDBYTE
-      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
-      z->state->mode = CHECK3;
-    case CHECK3:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
-      z->state->mode = CHECK2;
-    case CHECK2:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
-      z->state->mode = CHECK1;
-    case CHECK1:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE;
-
-      if (z->state->sub.check.was != z->state->sub.check.need)
-      {
-        z->state->mode = BAD;
-        z->msg = "incorrect data check";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      Trace((stderr, "inflate: zlib check ok\n"));
-      z->state->mode = DONE;
-    case DONE:
-      return Z_STREAM_END;
-    case BAD:
-      return Z_DATA_ERROR;
-    default:
-      return Z_STREAM_ERROR;
-  }
-
- empty:
-  if (f != Z_PACKET_FLUSH)
-    return r;
-  z->state->mode = BAD;
-  z->state->sub.marker = 0;       /* can try inflateSync */
-  return Z_DATA_ERROR;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output.  The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS).  On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-
-int inflateIncomp(
-	z_stream *z
-)
-{
-    if (z->state->mode != BLOCKS)
-	return Z_DATA_ERROR;
-    return inflate_addhistory(z->state->blocks, z);
-}
-
-
-int inflateSync(
-	z_stream *z
-)
-{
-  uInt n;       /* number of bytes to look at */
-  Bytef *p;     /* pointer to bytes */
-  uInt m;       /* number of marker bytes found in a row */
-  uLong r, w;   /* temporaries to save total_in and total_out */
-
-  /* set up */
-  if (z == Z_NULL || z->state == Z_NULL)
-    return Z_STREAM_ERROR;
-  if (z->state->mode != BAD)
-  {
-    z->state->mode = BAD;
-    z->state->sub.marker = 0;
-  }
-  if ((n = z->avail_in) == 0)
-    return Z_BUF_ERROR;
-  p = z->next_in;
-  m = z->state->sub.marker;
-
-  /* search */
-  while (n && m < 4)
-  {
-    if (*p == (Byte)(m < 2 ? 0 : 0xff))
-      m++;
-    else if (*p)
-      m = 0;
-    else
-      m = 4 - m;
-    p++, n--;
-  }
-
-  /* restore */
-  z->total_in += p - z->next_in;
-  z->next_in = p;
-  z->avail_in = n;
-  z->state->sub.marker = m;
-
-  /* return no joy or set up to restart on a new block */
-  if (m != 4)
-    return Z_DATA_ERROR;
-  r = z->total_in;  w = z->total_out;
-  inflateReset(z);
-  z->total_in = r;  z->total_out = w;
-  z->state->mode = BLOCKS;
-  return Z_OK;
-}
-
-#undef NEEDBYTE
-#undef NEXTBYTE
-
-/*+++++*/
-/* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* inflate blocks semi-private state */
-struct inflate_blocks_state {
-
-  /* mode */
-  enum {
-      TYPE,     /* get type bits (3, including end bit) */
-      LENS,     /* get lengths for stored */
-      STORED,   /* processing stored block */
-      TABLE,    /* get table lengths */
-      BTREE,    /* get bit lengths tree for a dynamic block */
-      DTREE,    /* get length, distance trees for a dynamic block */
-      CODES,    /* processing fixed or dynamic block */
-      DRY,      /* output remaining window bytes */
-      DONEB,     /* finished last block, done */
-      BADB}      /* got a data error--stuck here */
-    mode;               /* current inflate_block mode */
-
-  /* mode dependent information */
-  union {
-    uInt left;          /* if STORED, bytes left to copy */
-    struct {
-      uInt table;               /* table lengths (14 bits) */
-      uInt index;               /* index into blens (or border) */
-      uIntf *blens;             /* bit lengths of codes */
-      uInt bb;                  /* bit length tree depth */
-      inflate_huft *tb;         /* bit length decoding tree */
-      int nblens;		/* # elements allocated at blens */
-    } trees;            /* if DTREE, decoding info for trees */
-    struct {
-      inflate_huft *tl, *td;    /* trees to free */
-      inflate_codes_statef 
-         *codes;
-    } decode;           /* if CODES, current state */
-  } sub;                /* submode */
-  uInt last;            /* true if this block is the last block */
-
-  /* mode independent information */
-  uInt bitk;            /* bits in bit buffer */
-  uLong bitb;           /* bit buffer */
-  Bytef *window;        /* sliding window */
-  Bytef *end;           /* one byte after sliding window */
-  Bytef *read;          /* window read pointer */
-  Bytef *write;         /* window write pointer */
-  check_func checkfn;   /* check function */
-  uLong check;          /* check on output */
-
-};
-
-
-/* defines for inflate input/output */
-/*   update pointers and return */
-#define UPDBITS {s->bitb=b;s->bitk=k;}
-#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
-#define UPDOUT {s->write=q;}
-#define UPDATE {UPDBITS UPDIN UPDOUT}
-#define LEAVE {UPDATE return inflate_flush(s,z,r);}
-/*   get bytes and bits */
-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
-#define NEXTBYTE (n--,*p++)
-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define DUMPBITS(j) {b>>=(j);k-=(j);}
-/*   output bytes */
-#define WAVAIL (q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=WAVAIL;}
-#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=WAVAIL;}}
-#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
-/*   load local pointers */
-#define LOAD {LOADIN LOADOUT}
-
-/* And'ing with mask[n] masks the lower n bits */
-local uInt inflate_mask[] = {
-    0x0000,
-    0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
-    0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-/* copy as much as possible from the sliding window to the output area */
-local int inflate_flush OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    int));
-
-/*+++++*/
-/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-local int inflate_fast OF((
-    uInt,
-    uInt,
-    inflate_huft *,
-    inflate_huft *,
-    inflate_blocks_statef *,
-    z_stream *));
-
-
-/*+++++*/
-/* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* Table for deflate from PKZIP's appnote.txt. */
-local uInt border[] = { /* Order of the bit length code lengths */
-        16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-/*
-   Notes beyond the 1.93a appnote.txt:
-
-   1. Distance pointers never point before the beginning of the output
-      stream.
-   2. Distance pointers can point back across blocks, up to 32k away.
-   3. There is an implied maximum of 7 bits for the bit length table and
-      15 bits for the actual data.
-   4. If only one code exists, then it is encoded using one bit.  (Zero
-      would be more efficient, but perhaps a little confusing.)  If two
-      codes exist, they are coded using one bit each (0 and 1).
-   5. There is no way of sending zero distance codes--a dummy must be
-      sent if there are none.  (History: a pre 2.0 version of PKZIP would
-      store blocks with no distance codes, but this was discovered to be
-      too harsh a criterion.)  Valid only for 1.93a.  2.04c does allow
-      zero distance codes, which is sent as one code of zero bits in
-      length.
-   6. There are up to 286 literal/length codes.  Code 256 represents the
-      end-of-block.  Note however that the static length tree defines
-      288 codes just to fill out the Huffman codes.  Codes 286 and 287
-      cannot be used though, since there is no length base or extra bits
-      defined for them.  Similarily, there are up to 30 distance codes.
-      However, static trees define 32 codes (all 5 bits) to fill out the
-      Huffman codes, but the last two had better not show up in the data.
-   7. Unzip can check dynamic Huffman blocks for complete code sets.
-      The exception is that a single code would not be complete (see #4).
-   8. The five bits following the block type is really the number of
-      literal codes sent minus 257.
-   9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
-      (1+6+6).  Therefore, to output three times the length, you output
-      three codes (1+1+1), whereas to output four times the same length,
-      you only need two codes (1+3).  Hmm.
-  10. In the tree reconstruction algorithm, Code = Code + Increment
-      only if BitLength(i) is not zero.  (Pretty obvious.)
-  11. Correction: 4 Bits: # of Bit Length codes - 4     (4 - 19)
-  12. Note: length code 284 can represent 227-258, but length code 285
-      really is 258.  The last length deserves its own, short code
-      since it gets used a lot in very redundant files.  The length
-      258 is special since 258 - 3 (the min match length) is 255.
-  13. The literal/length and distance code bit lengths are read as a
-      single stream of lengths.  It is possible (and advantageous) for
-      a repeat code (16, 17, or 18) to go across the boundary between
-      the two sets of lengths.
- */
-
-
-local void inflate_blocks_reset(
-	inflate_blocks_statef *s,
-	z_stream *z,
-	uLongf *c
-)
-{
-  if (s->checkfn != Z_NULL)
-    *c = s->check;
-  if (s->mode == BTREE || s->mode == DTREE)
-    ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt));
-  if (s->mode == CODES)
-  {
-    inflate_codes_free(s->sub.decode.codes, z);
-    inflate_trees_free(s->sub.decode.td, z);
-    inflate_trees_free(s->sub.decode.tl, z);
-  }
-  s->mode = TYPE;
-  s->bitk = 0;
-  s->bitb = 0;
-  s->read = s->write = s->window;
-  if (s->checkfn != Z_NULL)
-    s->check = (*s->checkfn)(0L, Z_NULL, 0);
-  Trace((stderr, "inflate:   blocks reset\n"));
-}
-
-
-local inflate_blocks_statef *inflate_blocks_new(
-	z_stream *z,
-	check_func c,
-	uInt w
-)
-{
-  inflate_blocks_statef *s;
-
-  if ((s = (inflate_blocks_statef *)ZALLOC
-       (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
-    return s;
-  if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
-  {
-    ZFREE(z, s, sizeof(struct inflate_blocks_state));
-    return Z_NULL;
-  }
-  s->end = s->window + w;
-  s->checkfn = c;
-  s->mode = TYPE;
-  Trace((stderr, "inflate:   blocks allocated\n"));
-  inflate_blocks_reset(s, z, &s->check);
-  return s;
-}
-
-
-local int inflate_blocks(
-	inflate_blocks_statef *s,
-	z_stream *z,
-	int r
-)
-{
-  uInt t;               /* temporary storage */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input based on current state */
-  while (1) switch (s->mode)
-  {
-    case TYPE:
-      NEEDBITS(3)
-      t = (uInt)b & 7;
-      s->last = t & 1;
-      switch (t >> 1)
-      {
-        case 0:                         /* stored */
-          Trace((stderr, "inflate:     stored block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          t = k & 7;                    /* go to byte boundary */
-          DUMPBITS(t)
-          s->mode = LENS;               /* get length of stored block */
-          break;
-        case 1:                         /* fixed */
-          Trace((stderr, "inflate:     fixed codes block%s\n",
-                 s->last ? " (last)" : ""));
-          {
-            uInt bl, bd;
-            inflate_huft *tl, *td;
-
-            inflate_trees_fixed(&bl, &bd, &tl, &td);
-            s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
-            if (s->sub.decode.codes == Z_NULL)
-            {
-              r = Z_MEM_ERROR;
-              LEAVE
-            }
-            s->sub.decode.tl = Z_NULL;  /* don't try to free these */
-            s->sub.decode.td = Z_NULL;
-          }
-          DUMPBITS(3)
-          s->mode = CODES;
-          break;
-        case 2:                         /* dynamic */
-          Trace((stderr, "inflate:     dynamic codes block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          s->mode = TABLE;
-          break;
-        case 3:                         /* illegal */
-          DUMPBITS(3)
-          s->mode = BADB;
-          z->msg = "invalid block type";
-          r = Z_DATA_ERROR;
-          LEAVE
-      }
-      break;
-    case LENS:
-      NEEDBITS(32)
-      if (((~b) >> 16) != (b & 0xffff))
-      {
-        s->mode = BADB;
-        z->msg = "invalid stored block lengths";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-      s->sub.left = (uInt)b & 0xffff;
-      b = k = 0;                      /* dump bits */
-      Tracev((stderr, "inflate:       stored length %u\n", s->sub.left));
-      s->mode = s->sub.left ? STORED : TYPE;
-      break;
-    case STORED:
-      if (n == 0)
-        LEAVE
-      NEEDOUT
-      t = s->sub.left;
-      if (t > n) t = n;
-      if (t > m) t = m;
-      zmemcpy(q, p, t);
-      p += t;  n -= t;
-      q += t;  m -= t;
-      if ((s->sub.left -= t) != 0)
-        break;
-      Tracev((stderr, "inflate:       stored end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      s->mode = s->last ? DRY : TYPE;
-      break;
-    case TABLE:
-      NEEDBITS(14)
-      s->sub.trees.table = t = (uInt)b & 0x3fff;
-#ifndef PKZIP_BUG_WORKAROUND
-      if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
-      {
-        s->mode = BADB;
-        z->msg = "too many length or distance symbols";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-#endif
-      t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
-      if (t < 19)
-        t = 19;
-      if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
-      {
-        r = Z_MEM_ERROR;
-        LEAVE
-      }
-      s->sub.trees.nblens = t;
-      DUMPBITS(14)
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       table sizes ok\n"));
-      s->mode = BTREE;
-    case BTREE:
-      while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
-      {
-        NEEDBITS(3)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
-        DUMPBITS(3)
-      }
-      while (s->sub.trees.index < 19)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
-      s->sub.trees.bb = 7;
-      t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
-                             &s->sub.trees.tb, z);
-      if (t != Z_OK)
-      {
-        r = t;
-        if (r == Z_DATA_ERROR)
-          s->mode = BADB;
-        LEAVE
-      }
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       bits tree ok\n"));
-      s->mode = DTREE;
-    case DTREE:
-      while (t = s->sub.trees.table,
-             s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
-      {
-        inflate_huft *h;
-        uInt i, j, c;
-
-        t = s->sub.trees.bb;
-        NEEDBITS(t)
-        h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
-        t = h->word.what.Bits;
-        c = h->more.Base;
-        if (c < 16)
-        {
-          DUMPBITS(t)
-          s->sub.trees.blens[s->sub.trees.index++] = c;
-        }
-        else /* c == 16..18 */
-        {
-          i = c == 18 ? 7 : c - 14;
-          j = c == 18 ? 11 : 3;
-          NEEDBITS(t + i)
-          DUMPBITS(t)
-          j += (uInt)b & inflate_mask[i];
-          DUMPBITS(i)
-          i = s->sub.trees.index;
-          t = s->sub.trees.table;
-          if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
-              (c == 16 && i < 1))
-          {
-            s->mode = BADB;
-            z->msg = "invalid bit length repeat";
-            r = Z_DATA_ERROR;
-            LEAVE
-          }
-          c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
-          do {
-            s->sub.trees.blens[i++] = c;
-          } while (--j);
-          s->sub.trees.index = i;
-        }
-      }
-      inflate_trees_free(s->sub.trees.tb, z);
-      s->sub.trees.tb = Z_NULL;
-      {
-        uInt bl, bd;
-        inflate_huft *tl, *td;
-        inflate_codes_statef *c;
-
-        bl = 9;         /* must be <= 9 for lookahead assumptions */
-        bd = 6;         /* must be <= 9 for lookahead assumptions */
-        t = s->sub.trees.table;
-        t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
-                                  s->sub.trees.blens, &bl, &bd, &tl, &td, z);
-        if (t != Z_OK)
-        {
-          if (t == (uInt)Z_DATA_ERROR)
-            s->mode = BADB;
-          r = t;
-          LEAVE
-        }
-        Tracev((stderr, "inflate:       trees ok\n"));
-        if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
-        {
-          inflate_trees_free(td, z);
-          inflate_trees_free(tl, z);
-          r = Z_MEM_ERROR;
-          LEAVE
-        }
-        ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt));
-        s->sub.decode.codes = c;
-        s->sub.decode.tl = tl;
-        s->sub.decode.td = td;
-      }
-      s->mode = CODES;
-    case CODES:
-      UPDATE
-      if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
-        return inflate_flush(s, z, r);
-      r = Z_OK;
-      inflate_codes_free(s->sub.decode.codes, z);
-      inflate_trees_free(s->sub.decode.td, z);
-      inflate_trees_free(s->sub.decode.tl, z);
-      LOAD
-      Tracev((stderr, "inflate:       codes end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      if (!s->last)
-      {
-        s->mode = TYPE;
-        break;
-      }
-      if (k > 7)              /* return unused byte, if any */
-      {
-        Assert(k < 16, "inflate_codes grabbed too many bytes")
-        k -= 8;
-        n++;
-        p--;                    /* can always return one */
-      }
-      s->mode = DRY;
-    case DRY:
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      s->mode = DONEB;
-    case DONEB:
-      r = Z_STREAM_END;
-      LEAVE
-    case BADB:
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-}
-
-
-local int inflate_blocks_free(
-	inflate_blocks_statef *s,
-	z_stream *z,
-	uLongf *c
-)
-{
-  inflate_blocks_reset(s, z, c);
-  ZFREE(z, s->window, s->end - s->window);
-  ZFREE(z, s, sizeof(struct inflate_blocks_state));
-  Trace((stderr, "inflate:   blocks freed\n"));
-  return Z_OK;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output.  The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS).  On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-local int inflate_addhistory(
-	inflate_blocks_statef *s,
-	z_stream *z
-)
-{
-    uLong b;              /* bit buffer */  /* NOT USED HERE */
-    uInt k;               /* bits in bit buffer */ /* NOT USED HERE */
-    uInt t;               /* temporary storage */
-    Bytef *p;             /* input data pointer */
-    uInt n;               /* bytes available there */
-    Bytef *q;             /* output window write pointer */
-    uInt m;               /* bytes to end of window or read pointer */
-
-    if (s->read != s->write)
-	return Z_STREAM_ERROR;
-    if (s->mode != TYPE)
-	return Z_DATA_ERROR;
-
-    /* we're ready to rock */
-    LOAD
-    /* while there is input ready, copy to output buffer, moving
-     * pointers as needed.
-     */
-    while (n) {
-	t = n;  /* how many to do */
-	/* is there room until end of buffer? */
-	if (t > m) t = m;
-	/* update check information */
-	if (s->checkfn != Z_NULL)
-	    s->check = (*s->checkfn)(s->check, q, t);
-	zmemcpy(q, p, t);
-	q += t;
-	p += t;
-	n -= t;
-	z->total_out += t;
-	s->read = q;    /* drag read pointer forward */
-/*      WRAP  */ 	/* expand WRAP macro by hand to handle s->read */
-	if (q == s->end) {
-	    s->read = q = s->window;
-	    m = WAVAIL;
-	}
-    }
-    UPDATE
-    return Z_OK;
-}
-
-
-/*
- * At the end of a Deflate-compressed PPP packet, we expect to have seen
- * a `stored' block type value but not the (zero) length bytes.
- */
-local int inflate_packet_flush(
-	inflate_blocks_statef *s
-)
-{
-    if (s->mode != LENS)
-	return Z_DATA_ERROR;
-    s->mode = TYPE;
-    return Z_OK;
-}
-
-
-/*+++++*/
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-
-local int huft_build OF((
-    uIntf *,            /* code lengths in bits */
-    uInt,               /* number of codes */
-    uInt,               /* number of "simple" codes */
-    uIntf *,            /* list of base values for non-simple codes */
-    uIntf *,            /* list of extra bits for non-simple codes */
-    inflate_huft * FAR*,/* result: starting table */
-    uIntf *,            /* maximum lookup bits (returns actual) */
-    z_stream *));       /* for zalloc function */
-
-local voidpf falloc OF((
-    voidpf,             /* opaque pointer (not used) */
-    uInt,               /* number of items */
-    uInt));             /* size of item */
-
-local void ffree OF((
-    voidpf q,           /* opaque pointer (not used) */
-    voidpf p,           /* what to free (not used) */
-    uInt n));		/* number of bytes (not used) */
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-local uInt cplens[] = { /* Copy lengths for literal codes 257..285 */
-        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
-        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
-        /* actually lengths - 2; also see note #13 above about 258 */
-local uInt cplext[] = { /* Extra bits for literal codes 257..285 */
-        0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
-        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */
-local uInt cpdist[] = { /* Copy offsets for distance codes 0..29 */
-        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
-        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
-        8193, 12289, 16385, 24577};
-local uInt cpdext[] = { /* Extra bits for distance codes */
-        0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
-        7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
-        12, 12, 13, 13};
-
-/*
-   Huffman code decoding is performed using a multi-level table lookup.
-   The fastest way to decode is to simply build a lookup table whose
-   size is determined by the longest code.  However, the time it takes
-   to build this table can also be a factor if the data being decoded
-   is not very long.  The most common codes are necessarily the
-   shortest codes, so those codes dominate the decoding time, and hence
-   the speed.  The idea is you can have a shorter table that decodes the
-   shorter, more probable codes, and then point to subsidiary tables for
-   the longer codes.  The time it costs to decode the longer codes is
-   then traded against the time it takes to make longer tables.
-
-   This results of this trade are in the variables lbits and dbits
-   below.  lbits is the number of bits the first level table for literal/
-   length codes can decode in one step, and dbits is the same thing for
-   the distance codes.  Subsequent tables are also less than or equal to
-   those sizes.  These values may be adjusted either when all of the
-   codes are shorter than that, in which case the longest code length in
-   bits is used, or when the shortest code is *longer* than the requested
-   table size, in which case the length of the shortest code in bits is
-   used.
-
-   There are two different values for the two tables, since they code a
-   different number of possibilities each.  The literal/length table
-   codes 286 possible values, or in a flat code, a little over eight
-   bits.  The distance table codes 30 possible values, or a little less
-   than five bits, flat.  The optimum values for speed end up being
-   about one bit more than those, so lbits is 8+1 and dbits is 5+1.
-   The optimum values may differ though from machine to machine, and
-   possibly even between compilers.  Your mileage may vary.
- */
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
-#define BMAX 15         /* maximum bit length of any code */
-#define N_MAX 288       /* maximum number of codes in any set */
-
-#ifdef DEBUG_ZLIB
-  uInt inflate_hufts;
-#endif
-
-local int huft_build(
-	uIntf *b,               /* code lengths in bits (all assumed <= BMAX) */
-	uInt n,                 /* number of codes (assumed <= N_MAX) */
-	uInt s,                 /* number of simple-valued codes (0..s-1) */
-	uIntf *d,               /* list of base values for non-simple codes */
-	uIntf *e,               /* list of extra bits for non-simple codes */
-	inflate_huft * FAR *t,  /* result: starting table */
-	uIntf *m,               /* maximum lookup bits, returns actual */
-	z_stream *zs            /* for zalloc function */
-)
-/* Given a list of code lengths and a maximum table size, make a set of
-   tables to decode that set of codes.  Return Z_OK on success, Z_BUF_ERROR
-   if the given code set is incomplete (the tables are still built in this
-   case), Z_DATA_ERROR if the input is invalid (all zero length codes or an
-   over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */
-{
-
-  uInt a;                       /* counter for codes of length k */
-  uInt c[BMAX+1];               /* bit length count table */
-  uInt f;                       /* i repeats in table every f entries */
-  int g;                        /* maximum code length */
-  int h;                        /* table level */
-  register uInt i;              /* counter, current code */
-  register uInt j;              /* counter */
-  register int k;               /* number of bits in current code */
-  int l;                        /* bits per table (returned in m) */
-  register uIntf *p;            /* pointer into c[], b[], or v[] */
-  inflate_huft *q;              /* points to current table */
-  struct inflate_huft_s r;      /* table entry for structure assignment */
-  inflate_huft *u[BMAX];        /* table stack */
-  uInt v[N_MAX];                /* values in order of bit length */
-  register int w;               /* bits before this table == (l * h) */
-  uInt x[BMAX+1];               /* bit offsets, then code stack */
-  uIntf *xp;                    /* pointer into x */
-  int y;                        /* number of dummy codes added */
-  uInt z;                       /* number of entries in current table */
-
-
-  /* Generate counts for each bit length */
-  p = c;
-#define C0 *p++ = 0;
-#define C2 C0 C0 C0 C0
-#define C4 C2 C2 C2 C2
-  C4                            /* clear c[]--assume BMAX+1 is 16 */
-  p = b;  i = n;
-  do {
-    c[*p++]++;                  /* assume all entries <= BMAX */
-  } while (--i);
-  if (c[0] == n)                /* null input--all zero length codes */
-  {
-    *t = (inflate_huft *)Z_NULL;
-    *m = 0;
-    return Z_DATA_ERROR;
-  }
-
-
-  /* Find minimum and maximum length, bound *m by those */
-  l = *m;
-  for (j = 1; j <= BMAX; j++)
-    if (c[j])
-      break;
-  k = j;                        /* minimum code length */
-  if ((uInt)l < j)
-    l = j;
-  for (i = BMAX; i; i--)
-    if (c[i])
-      break;
-  g = i;                        /* maximum code length */
-  if ((uInt)l > i)
-    l = i;
-  *m = l;
-
-
-  /* Adjust last length count to fill out codes, if needed */
-  for (y = 1 << j; j < i; j++, y <<= 1)
-    if ((y -= c[j]) < 0)
-      return Z_DATA_ERROR;
-  if ((y -= c[i]) < 0)
-    return Z_DATA_ERROR;
-  c[i] += y;
-
-
-  /* Generate starting offsets into the value table for each length */
-  x[1] = j = 0;
-  p = c + 1;  xp = x + 2;
-  while (--i) {                 /* note that i == g from above */
-    *xp++ = (j += *p++);
-  }
-
-
-  /* Make a table of values in order of bit lengths */
-  p = b;  i = 0;
-  do {
-    if ((j = *p++) != 0)
-      v[x[j]++] = i;
-  } while (++i < n);
-  n = x[g];			/* set n to length of v */
-
-
-  /* Generate the Huffman codes and for each, make the table entries */
-  x[0] = i = 0;                 /* first Huffman code is zero */
-  p = v;                        /* grab values in bit order */
-  h = -1;                       /* no tables yet--level -1 */
-  w = -l;                       /* bits decoded == (l * h) */
-  u[0] = (inflate_huft *)Z_NULL;        /* just to keep compilers happy */
-  q = (inflate_huft *)Z_NULL;   /* ditto */
-  z = 0;                        /* ditto */
-
-  /* go through the bit lengths (k already is bits in shortest code) */
-  for (; k <= g; k++)
-  {
-    a = c[k];
-    while (a--)
-    {
-      /* here i is the Huffman code of length k bits for value *p */
-      /* make tables up to required level */
-      while (k > w + l)
-      {
-        h++;
-        w += l;                 /* previous table always l bits */
-
-        /* compute minimum size table less than or equal to l bits */
-        z = (z = g - w) > (uInt)l ? l : z;      /* table size upper limit */
-        if ((f = 1 << (j = k - w)) > a + 1)     /* try a k-w bit table */
-        {                       /* too few codes for k-w bit table */
-          f -= a + 1;           /* deduct codes from patterns left */
-          xp = c + k;
-          if (j < z)
-            while (++j < z)     /* try smaller tables up to z bits */
-            {
-              if ((f <<= 1) <= *++xp)
-                break;          /* enough codes to use up j bits */
-              f -= *xp;         /* else deduct codes from patterns */
-            }
-        }
-        z = 1 << j;             /* table entries for j-bit table */
-
-        /* allocate and link in new table */
-        if ((q = (inflate_huft *)ZALLOC
-             (zs,z + 1,sizeof(inflate_huft))) == Z_NULL)
-        {
-          if (h)
-            inflate_trees_free(u[0], zs);
-          return Z_MEM_ERROR;   /* not enough memory */
-        }
-	q->word.Nalloc = z + 1;
-#ifdef DEBUG_ZLIB
-        inflate_hufts += z + 1;
-#endif
-        *t = q + 1;             /* link to list for huft_free() */
-        *(t = &(q->next)) = Z_NULL;
-        u[h] = ++q;             /* table starts after link */
-
-        /* connect to last table, if there is one */
-        if (h)
-        {
-          x[h] = i;             /* save pattern for backing up */
-          r.bits = (Byte)l;     /* bits to dump before this table */
-          r.exop = (Byte)j;     /* bits in this table */
-          r.next = q;           /* pointer to this table */
-          j = i >> (w - l);     /* (get around Turbo C bug) */
-          u[h-1][j] = r;        /* connect to last table */
-        }
-      }
-
-      /* set up table entry in r */
-      r.bits = (Byte)(k - w);
-      if (p >= v + n)
-        r.exop = 128 + 64;      /* out of values--invalid code */
-      else if (*p < s)
-      {
-        r.exop = (Byte)(*p < 256 ? 0 : 32 + 64);     /* 256 is end-of-block */
-        r.base = *p++;          /* simple code is just the value */
-      }
-      else
-      {
-        r.exop = (Byte)e[*p - s] + 16 + 64; /* non-simple--look up in lists */
-        r.base = d[*p++ - s];
-      }
-
-      /* fill code-like entries with r */
-      f = 1 << (k - w);
-      for (j = i >> w; j < z; j += f)
-        q[j] = r;
-
-      /* backwards increment the k-bit code i */
-      for (j = 1 << (k - 1); i & j; j >>= 1)
-        i ^= j;
-      i ^= j;
-
-      /* backup over finished tables */
-      while ((i & ((1 << w) - 1)) != x[h])
-      {
-        h--;                    /* don't need to update q */
-        w -= l;
-      }
-    }
-  }
-
-
-  /* Return Z_BUF_ERROR if we were given an incomplete table */
-  return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
-}
-
-
-local int inflate_trees_bits(
-	uIntf *c,               /* 19 code lengths */
-	uIntf *bb,              /* bits tree desired/actual depth */
-	inflate_huft * FAR *tb, /* bits tree result */
-	z_stream *z             /* for zfree function */
-)
-{
-  int r;
-
-  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z);
-  if (r == Z_DATA_ERROR)
-    z->msg = "oversubscribed dynamic bit lengths tree";
-  else if (r == Z_BUF_ERROR)
-  {
-    inflate_trees_free(*tb, z);
-    z->msg = "incomplete dynamic bit lengths tree";
-    r = Z_DATA_ERROR;
-  }
-  return r;
-}
-
-
-local int inflate_trees_dynamic(
-	uInt nl,                /* number of literal/length codes */
-	uInt nd,                /* number of distance codes */
-	uIntf *c,               /* that many (total) code lengths */
-	uIntf *bl,              /* literal desired/actual bit depth */
-	uIntf *bd,              /* distance desired/actual bit depth */
-	inflate_huft * FAR *tl, /* literal/length tree result */
-	inflate_huft * FAR *td, /* distance tree result */
-	z_stream *z             /* for zfree function */
-)
-{
-  int r;
-
-  /* build literal/length tree */
-  if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK)
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = "oversubscribed literal/length tree";
-    else if (r == Z_BUF_ERROR)
-    {
-      inflate_trees_free(*tl, z);
-      z->msg = "incomplete literal/length tree";
-      r = Z_DATA_ERROR;
-    }
-    return r;
-  }
-
-  /* build distance tree */
-  if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK)
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = "oversubscribed literal/length tree";
-    else if (r == Z_BUF_ERROR) {
-#ifdef PKZIP_BUG_WORKAROUND
-      r = Z_OK;
-    }
-#else
-      inflate_trees_free(*td, z);
-      z->msg = "incomplete literal/length tree";
-      r = Z_DATA_ERROR;
-    }
-    inflate_trees_free(*tl, z);
-    return r;
-#endif
-  }
-
-  /* done */
-  return Z_OK;
-}
-
-
-/* build fixed tables only once--keep them here */
-local int fixed_lock = 0;
-local int fixed_built = 0;
-#define FIXEDH 530      /* number of hufts used by fixed tables */
-local uInt fixed_left = FIXEDH;
-local inflate_huft fixed_mem[FIXEDH];
-local uInt fixed_bl;
-local uInt fixed_bd;
-local inflate_huft *fixed_tl;
-local inflate_huft *fixed_td;
-
-
-local voidpf falloc(
-	voidpf q,       /* opaque pointer (not used) */
-	uInt n,         /* number of items */
-	uInt s          /* size of item */
-)
-{
-  Assert(s == sizeof(inflate_huft) && n <= fixed_left,
-         "inflate_trees falloc overflow");
-  if (q) s++; /* to make some compilers happy */
-  fixed_left -= n;
-  return (voidpf)(fixed_mem + fixed_left);
-}
-
-
-local void ffree(
-	voidpf q,
-	voidpf p,
-	uInt n
-)
-{
-  Assert(0, "inflate_trees ffree called!");
-  if (q) q = p; /* to make some compilers happy */
-}
-
-
-local int inflate_trees_fixed(
-	uIntf *bl,               /* literal desired/actual bit depth */
-	uIntf *bd,               /* distance desired/actual bit depth */
-	inflate_huft * FAR *tl,  /* literal/length tree result */
-	inflate_huft * FAR *td   /* distance tree result */
-)
-{
-  /* build fixed tables if not built already--lock out other instances */
-  while (++fixed_lock > 1)
-    fixed_lock--;
-  if (!fixed_built)
-  {
-    int k;              /* temporary variable */
-    unsigned c[288];    /* length list for huft_build */
-    z_stream z;         /* for falloc function */
-
-    /* set up fake z_stream for memory routines */
-    z.zalloc = falloc;
-    z.zfree = ffree;
-    z.opaque = Z_NULL;
-
-    /* literal table */
-    for (k = 0; k < 144; k++)
-      c[k] = 8;
-    for (; k < 256; k++)
-      c[k] = 9;
-    for (; k < 280; k++)
-      c[k] = 7;
-    for (; k < 288; k++)
-      c[k] = 8;
-    fixed_bl = 7;
-    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z);
-
-    /* distance table */
-    for (k = 0; k < 30; k++)
-      c[k] = 5;
-    fixed_bd = 5;
-    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z);
-
-    /* done */
-    fixed_built = 1;
-  }
-  fixed_lock--;
-  *bl = fixed_bl;
-  *bd = fixed_bd;
-  *tl = fixed_tl;
-  *td = fixed_td;
-  return Z_OK;
-}
-
-
-local int inflate_trees_free(
-	inflate_huft *t,        /* table to free */
-	z_stream *z             /* for zfree function */
-)
-/* Free the malloc'ed tables built by huft_build(), which makes a linked
-   list of the tables it made, with the links in a dummy first entry of
-   each table. */
-{
-  register inflate_huft *p, *q;
-
-  /* Go through linked list, freeing from the malloced (t[-1]) address. */
-  p = t;
-  while (p != Z_NULL)
-  {
-    q = (--p)->next;
-    ZFREE(z, p, p->word.Nalloc * sizeof(inflate_huft));
-    p = q;
-  } 
-  return Z_OK;
-}
-
-/*+++++*/
-/* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* inflate codes private state */
-struct inflate_codes_state {
-
-  /* mode */
-  enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-      START,    /* x: set up for LEN */
-      LEN,      /* i: get length/literal/eob next */
-      LENEXT,   /* i: getting length extra (have base) */
-      DIST,     /* i: get distance next */
-      DISTEXT,  /* i: getting distance extra */
-      COPY,     /* o: copying bytes in window, waiting for space */
-      LIT,      /* o: got literal, waiting for output space */
-      WASH,     /* o: got eob, possibly still output waiting */
-      END,      /* x: got eob and all data flushed */
-      BADCODE}  /* x: got error */
-    mode;               /* current inflate_codes mode */
-
-  /* mode dependent information */
-  uInt len;
-  union {
-    struct {
-      inflate_huft *tree;       /* pointer into tree */
-      uInt need;                /* bits needed */
-    } code;             /* if LEN or DIST, where in tree */
-    uInt lit;           /* if LIT, literal */
-    struct {
-      uInt get;                 /* bits to get for extra */
-      uInt dist;                /* distance back to copy from */
-    } copy;             /* if EXT or COPY, where and how much */
-  } sub;                /* submode */
-
-  /* mode independent information */
-  Byte lbits;           /* ltree bits decoded per branch */
-  Byte dbits;           /* dtree bits decoder per branch */
-  inflate_huft *ltree;          /* literal/length/eob tree */
-  inflate_huft *dtree;          /* distance tree */
-
-};
-
-
-local inflate_codes_statef *inflate_codes_new(
-	uInt bl,
-	uInt bd,
-	inflate_huft *tl,
-	inflate_huft *td,
-	z_stream *z
-)
-{
-  inflate_codes_statef *c;
-
-  if ((c = (inflate_codes_statef *)
-       ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
-  {
-    c->mode = START;
-    c->lbits = (Byte)bl;
-    c->dbits = (Byte)bd;
-    c->ltree = tl;
-    c->dtree = td;
-    Tracev((stderr, "inflate:       codes new\n"));
-  }
-  return c;
-}
-
-
-local int inflate_codes(
-	inflate_blocks_statef *s,
-	z_stream *z,
-	int r
-)
-{
-  uInt j;               /* temporary storage */
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  Bytef *f;             /* pointer to copy strings from */
-  inflate_codes_statef *c = s->sub.decode.codes;  /* codes state */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input and output based on current state */
-  while (1) switch (c->mode)
-  {             /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-    case START:         /* x: set up for LEN */
-#ifndef SLOW
-      if (m >= 258 && n >= 10)
-      {
-        UPDATE
-        r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
-        LOAD
-        if (r != Z_OK)
-        {
-          c->mode = r == Z_STREAM_END ? WASH : BADCODE;
-          break;
-        }
-      }
-#endif /* !SLOW */
-      c->sub.code.need = c->lbits;
-      c->sub.code.tree = c->ltree;
-      c->mode = LEN;
-    case LEN:           /* i: get length/literal/eob next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e == 0)               /* literal */
-      {
-        c->sub.lit = t->base;
-        Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                 "inflate:         literal '%c'\n" :
-                 "inflate:         literal 0x%02x\n", t->base));
-        c->mode = LIT;
-        break;
-      }
-      if (e & 16)               /* length */
-      {
-        c->sub.copy.get = e & 15;
-        c->len = t->base;
-        c->mode = LENEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t->next;
-        break;
-      }
-      if (e & 32)               /* end of block */
-      {
-        Tracevv((stderr, "inflate:         end of block\n"));
-        c->mode = WASH;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = "invalid literal/length code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case LENEXT:        /* i: getting length extra (have base) */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->len += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      c->sub.code.need = c->dbits;
-      c->sub.code.tree = c->dtree;
-      Tracevv((stderr, "inflate:         length %u\n", c->len));
-      c->mode = DIST;
-    case DIST:          /* i: get distance next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e & 16)               /* distance */
-      {
-        c->sub.copy.get = e & 15;
-        c->sub.copy.dist = t->base;
-        c->mode = DISTEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t->next;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = "invalid distance code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case DISTEXT:       /* i: getting distance extra */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->sub.copy.dist += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      Tracevv((stderr, "inflate:         distance %u\n", c->sub.copy.dist));
-      c->mode = COPY;
-    case COPY:          /* o: copying bytes in window, waiting for space */
-#ifndef __TURBOC__ /* Turbo C bug for following expression */
-      f = (uInt)(q - s->window) < c->sub.copy.dist ?
-          s->end - (c->sub.copy.dist - (q - s->window)) :
-          q - c->sub.copy.dist;
-#else
-      f = q - c->sub.copy.dist;
-      if ((uInt)(q - s->window) < c->sub.copy.dist)
-        f = s->end - (c->sub.copy.dist - (q - s->window));
-#endif
-      while (c->len)
-      {
-        NEEDOUT
-        OUTBYTE(*f++)
-        if (f == s->end)
-          f = s->window;
-        c->len--;
-      }
-      c->mode = START;
-      break;
-    case LIT:           /* o: got literal, waiting for output space */
-      NEEDOUT
-      OUTBYTE(c->sub.lit)
-      c->mode = START;
-      break;
-    case WASH:          /* o: got eob, possibly more output */
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      c->mode = END;
-    case END:
-      r = Z_STREAM_END;
-      LEAVE
-    case BADCODE:       /* x: got error */
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-}
-
-
-local void inflate_codes_free(
-	inflate_codes_statef *c,
-	z_stream *z
-)
-{
-  ZFREE(z, c, sizeof(struct inflate_codes_state));
-  Tracev((stderr, "inflate:       codes free\n"));
-}
-
-/*+++++*/
-/* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* copy as much as possible from the sliding window to the output area */
-local int inflate_flush(
-	inflate_blocks_statef *s,
-	z_stream *z,
-	int r
-)
-{
-  uInt n;
-  Bytef *p, *q;
-
-  /* local copies of source and destination pointers */
-  p = z->next_out;
-  q = s->read;
-
-  /* compute number of bytes to copy as far as end of window */
-  n = (uInt)((q <= s->write ? s->write : s->end) - q);
-  if (n > z->avail_out) n = z->avail_out;
-  if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-  /* update counters */
-  z->avail_out -= n;
-  z->total_out += n;
-
-  /* update check information */
-  if (s->checkfn != Z_NULL)
-    s->check = (*s->checkfn)(s->check, q, n);
-
-  /* copy as far as end of window */
-  zmemcpy(p, q, n);
-  p += n;
-  q += n;
-
-  /* see if more to copy at beginning of window */
-  if (q == s->end)
-  {
-    /* wrap pointers */
-    q = s->window;
-    if (s->write == s->end)
-      s->write = s->window;
-
-    /* compute bytes to copy */
-    n = (uInt)(s->write - q);
-    if (n > z->avail_out) n = z->avail_out;
-    if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-    /* update counters */
-    z->avail_out -= n;
-    z->total_out += n;
-
-    /* update check information */
-    if (s->checkfn != Z_NULL)
-      s->check = (*s->checkfn)(s->check, q, n);
-
-    /* copy */
-    zmemcpy(p, q, n);
-    p += n;
-    q += n;
-  }
-
-  /* update pointers */
-  z->next_out = p;
-  s->read = q;
-
-  /* done */
-  return r;
-}
-
-
-/*+++++*/
-/* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* macros for bit input with no checking and for returning unused bytes */
-#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;}
-
-/* Called with number of bytes left to write in window at least 258
-   (the maximum string length) and number of input bytes available
-   at least ten.  The ten bytes are six bytes for the longest length/
-   distance pair plus four bytes for overloading the bit buffer. */
-
-local int inflate_fast(
-	uInt bl,
-	uInt bd,
-	inflate_huft *tl,
-	inflate_huft *td,
-	inflate_blocks_statef *s,
-	z_stream *z
-)
-{
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  uInt ml;              /* mask for literal/length tree */
-  uInt md;              /* mask for distance tree */
-  uInt c;               /* bytes to copy */
-  uInt d;               /* distance back to copy from */
-  Bytef *r;             /* copy source pointer */
-
-  /* load input, output, bit values */
-  LOAD
-
-  /* initialize masks */
-  ml = inflate_mask[bl];
-  md = inflate_mask[bd];
-
-  /* do until not enough input or output space for fast loop */
-  do {                          /* assume called with m >= 258 && n >= 10 */
-    /* get literal/length code */
-    GRABBITS(20)                /* max bits for literal/length code */
-    if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
-    {
-      DUMPBITS(t->bits)
-      Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                "inflate:         * literal '%c'\n" :
-                "inflate:         * literal 0x%02x\n", t->base));
-      *q++ = (Byte)t->base;
-      m--;
-      continue;
-    }
-    do {
-      DUMPBITS(t->bits)
-      if (e & 16)
-      {
-        /* get extra bits for length */
-        e &= 15;
-        c = t->base + ((uInt)b & inflate_mask[e]);
-        DUMPBITS(e)
-        Tracevv((stderr, "inflate:         * length %u\n", c));
-
-        /* decode distance base of block to copy */
-        GRABBITS(15);           /* max bits for distance code */
-        e = (t = td + ((uInt)b & md))->exop;
-        do {
-          DUMPBITS(t->bits)
-          if (e & 16)
-          {
-            /* get extra bits to add to distance base */
-            e &= 15;
-            GRABBITS(e)         /* get extra bits (up to 13) */
-            d = t->base + ((uInt)b & inflate_mask[e]);
-            DUMPBITS(e)
-            Tracevv((stderr, "inflate:         * distance %u\n", d));
-
-            /* do the copy */
-            m -= c;
-            if ((uInt)(q - s->window) >= d)     /* offset before dest */
-            {                                   /*  just copy */
-              r = q - d;
-              *q++ = *r++;  c--;        /* minimum count is three, */
-              *q++ = *r++;  c--;        /*  so unroll loop a little */
-            }
-            else                        /* else offset after destination */
-            {
-              e = d - (q - s->window);  /* bytes from offset to end */
-              r = s->end - e;           /* pointer to offset */
-              if (c > e)                /* if source crosses, */
-              {
-                c -= e;                 /* copy to end of window */
-                do {
-                  *q++ = *r++;
-                } while (--e);
-                r = s->window;          /* copy rest from start of window */
-              }
-            }
-            do {                        /* copy all or what's left */
-              *q++ = *r++;
-            } while (--c);
-            break;
-          }
-          else if ((e & 64) == 0)
-            e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop;
-          else
-          {
-            z->msg = "invalid distance code";
-            UNGRAB
-            UPDATE
-            return Z_DATA_ERROR;
-          }
-        } while (1);
-        break;
-      }
-      if ((e & 64) == 0)
-      {
-        if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0)
-        {
-          DUMPBITS(t->bits)
-          Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                    "inflate:         * literal '%c'\n" :
-                    "inflate:         * literal 0x%02x\n", t->base));
-          *q++ = (Byte)t->base;
-          m--;
-          break;
-        }
-      }
-      else if (e & 32)
-      {
-        Tracevv((stderr, "inflate:         * end of block\n"));
-        UNGRAB
-        UPDATE
-        return Z_STREAM_END;
-      }
-      else
-      {
-        z->msg = "invalid literal/length code";
-        UNGRAB
-        UPDATE
-        return Z_DATA_ERROR;
-      }
-    } while (1);
-  } while (m >= 258 && n >= 10);
-
-  /* not enough input or output--restore pointers and return */
-  UNGRAB
-  UPDATE
-  return Z_OK;
-}
-
-
-/*+++++*/
-/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: zutil.c,v 1.8 1995/05/03 17:27:12 jloup Exp */
-
-char *zlib_version = ZLIB_VERSION;
-
-char *z_errmsg[] = {
-"stream end",          /* Z_STREAM_END    1 */
-"",                    /* Z_OK            0 */
-"file error",          /* Z_ERRNO        (-1) */
-"stream error",        /* Z_STREAM_ERROR (-2) */
-"data error",          /* Z_DATA_ERROR   (-3) */
-"insufficient memory", /* Z_MEM_ERROR    (-4) */
-"buffer error",        /* Z_BUF_ERROR    (-5) */
-""};
-
-
-/*+++++*/
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: adler32.c,v 1.6 1995/05/03 17:27:08 jloup Exp */
-
-#define BASE 65521L /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf)  {s1 += *buf++; s2 += s1;}
-#define DO2(buf)  DO1(buf); DO1(buf);
-#define DO4(buf)  DO2(buf); DO2(buf);
-#define DO8(buf)  DO4(buf); DO4(buf);
-#define DO16(buf) DO8(buf); DO8(buf);
-
-/* ========================================================================= */
-uLong adler32(
-	uLong adler,
-	Bytef *buf,
-	uInt len
-)
-{
-    unsigned long s1 = adler & 0xffff;
-    unsigned long s2 = (adler >> 16) & 0xffff;
-    int k;
-
-    if (buf == Z_NULL) return 1L;
-
-    while (len > 0) {
-        k = len < NMAX ? len : NMAX;
-        len -= k;
-        while (k >= 16) {
-            DO16(buf);
-            k -= 16;
-        }
-        if (k != 0) do {
-            DO1(buf);
-        } while (--k);
-        s1 %= BASE;
-        s2 %= BASE;
-    }
-    return (s2 << 16) | s1;
-}
diff -L arch/ppc64/boot/zlib.h -puN arch/ppc64/boot/zlib.h~ppc64-boot-remove-zlib /dev/null
--- devel/arch/ppc64/boot/zlib.h
+++ /dev/null	2003-09-15 06:40:47.000000000 -0700
@@ -1,432 +0,0 @@
-/*		*/
-
-/*
- * This file is derived from zlib.h and zconf.h from the zlib-0.95
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.
- */
-
-/*
- *  ==FILEVERSION 960122==
- *
- * This marker is used by the Linux installation script to determine
- * whether an up-to-date version of this file is already installed.
- */
-
-/* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 0.95, Aug 16th, 1995.
-
-  Copyright (C) 1995 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  gzip at prep.ai.mit.edu    madler at alumni.caltech.edu
- */
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-/* #include "zconf.h" */	/* included directly here */
-
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */
-
-/*
-     The library does not install any signal handler. It is recommended to
-  add at least a handler for SIGSEGV when decompressing; the library checks
-  the consistency of the input data whenever possible but may go nuts
-  for some forms of corrupted input.
- */
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints
- * at addresses which are not a multiple of their size.
- * Under DOS, -DFAR=far or -DFAR=__far may be needed.
- */
-
-#ifndef STDC
-#  if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus)
-#    define STDC
-#  endif
-#endif
-
-#ifdef	__MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */
-#  include <unix.h>
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-#  ifdef MAXSEG_64K
-#    define MAX_MEM_LEVEL 8
-#  else
-#    define MAX_MEM_LEVEL 9
-#  endif
-#endif
-
-#ifndef FAR
-#  define FAR
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
-#ifndef MAX_WBITS
-#  define MAX_WBITS   15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
-            1 << (windowBits+2)   +  1 << (memLevel+9)
- that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
-     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
-   The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
-                        /* Type declarations */
-
-#ifndef OF /* function prototypes */
-#  ifdef STDC
-#    define OF(args)  args
-#  else
-#    define OF(args)  ()
-#  endif
-#endif
-
-typedef unsigned char  Byte;  /* 8 bits */
-typedef unsigned int   uInt;  /* 16 bits or more */
-typedef unsigned long  uLong; /* 32 bits or more */
-
-typedef Byte FAR Bytef;
-typedef char FAR charf;
-typedef int FAR intf;
-typedef uInt FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
-   typedef void FAR *voidpf;
-   typedef void     *voidp;
-#else
-   typedef Byte FAR *voidpf;
-   typedef Byte     *voidp;
-#endif
-
-/* end of original zconf.h */
-
-#define ZLIB_VERSION "0.95P"
-
-/* 
-     The 'zlib' compression library provides in-memory compression and
-  decompression functions, including integrity checks of the uncompressed
-  data.  This version of the library supports only one compression method
-  (deflation) but other algorithms may be added later and will have the same
-  stream interface.
-
-     For compression the application must provide the output buffer and
-  may optionally provide the input buffer for optimization. For decompression,
-  the application must provide the input buffer and may optionally provide
-  the output buffer for optimization.
-
-     Compression can be done in a single step if the buffers are large
-  enough (for example if an input file is mmap'ed), or can be done by
-  repeated calls of the compression function.  In the latter case, the
-  application must provide more input and/or consume the output
-  (providing more output space) before each call.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void   (*free_func)  OF((voidpf opaque, voidpf address, uInt nbytes));
-
-struct internal_state;
-
-typedef struct z_stream_s {
-    Bytef    *next_in;  /* next input byte */
-    uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
-
-    Bytef    *next_out; /* next output byte should be put there */
-    uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
-
-    char     *msg;      /* last error message, NULL if no error */
-    struct internal_state FAR *state; /* not visible by applications */
-
-    alloc_func zalloc;  /* used to allocate the internal state */
-    free_func  zfree;   /* used to free the internal state */
-    voidp      opaque;  /* private data object passed to zalloc and zfree */
-
-    Byte     data_type; /* best guess about the data type: ascii or binary */
-
-} z_stream;
-
-/*
-   The application must update next_in and avail_in when avail_in has
-   dropped to zero. It must update next_out and avail_out when avail_out
-   has dropped to zero. The application must initialize zalloc, zfree and
-   opaque before calling the init function. All other fields are set by the
-   compression library and must not be updated by the application.
-
-   The opaque value provided by the application will be passed as the first
-   parameter for calls of zalloc and zfree. This can be useful for custom
-   memory management. The compression library attaches no meaning to the
-   opaque value.
-
-   zalloc must return Z_NULL if there is not enough memory for the object.
-   On 16-bit systems, the functions zalloc and zfree must be able to allocate
-   exactly 65536 bytes, but will not be required to allocate more than this
-   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
-   pointers returned by zalloc for objects of exactly 65536 bytes *must*
-   have their offset normalized to zero. The default allocation function
-   provided by this library ensures this (see zutil.c). To reduce memory
-   requirements and avoid any allocation of 64K objects, at the expense of
-   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
-   The fields total_in and total_out can be used for statistics or
-   progress reports. After compression, total_in holds the total size of
-   the uncompressed data and may be saved for use in the decompressor
-   (particularly if the decompressor wants to decompress everything in
-   a single step).
-*/
-
-                        /* constants */
-
-#define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1
-#define Z_FULL_FLUSH    2
-#define Z_SYNC_FLUSH    3 /* experimental: partial_flush + byte align */
-#define Z_FINISH        4
-#define Z_PACKET_FLUSH	5
-/* See deflate() below for the usage of these constants */
-
-#define Z_OK            0
-#define Z_STREAM_END    1
-#define Z_ERRNO        (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR   (-3)
-#define Z_MEM_ERROR    (-4)
-#define Z_BUF_ERROR    (-5)
-/* error codes for the compression/decompression functions */
-
-#define Z_BEST_SPEED             1
-#define Z_BEST_COMPRESSION       9
-#define Z_DEFAULT_COMPRESSION  (-1)
-/* compression levels */
-
-#define Z_FILTERED            1
-#define Z_HUFFMAN_ONLY        2
-#define Z_DEFAULT_STRATEGY    0
-
-#define Z_BINARY   0
-#define Z_ASCII    1
-#define Z_UNKNOWN  2
-/* Used to set the data_type field */
-
-#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
-
-extern char *zlib_version;
-/* The application can compare zlib_version and ZLIB_VERSION for consistency.
-   If the first character differs, the library code actually used is
-   not compatible with the zlib.h header file used by the application.
- */
-
-                        /* basic functions */
-
-extern int inflateInit OF((z_stream *strm));
-/* 
-     Initializes the internal stream state for decompression. The fields
-   zalloc and zfree must be initialized before by the caller.  If zalloc and
-   zfree are set to Z_NULL, inflateInit updates them to use default allocation
-   functions.
-
-     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory.  msg is set to null if there is no error message.
-   inflateInit does not perform any decompression: this will be done by
-   inflate().
-*/
-
-
-extern int inflate OF((z_stream *strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Decompress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in is updated and processing
-    will resume at this point for the next call of inflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly.  inflate() always provides as much output as possible
-    (until there is no more input data or no more space in the output buffer).
-
-  Before the call of inflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating the next_* and avail_* values accordingly.
-  The application can consume the uncompressed output when it wants, for
-  example when the output buffer is full (avail_out == 0), or after each
-  call of inflate().
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
-  inflate flushes as much output as possible to the output buffer. The
-  flushing behavior of inflate is not specified for values of the flush
-  parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
-  current implementation actually flushes as much output as possible
-  anyway.  For Z_PACKET_FLUSH, inflate checks that once all the input data
-  has been consumed, it is expecting to see the length field of a stored
-  block; if not, it returns Z_DATA_ERROR.
-
-    inflate() should normally be called until it returns Z_STREAM_END or an
-  error. However if all decompression is to be performed in a single step
-  (a single call of inflate), the parameter flush should be set to
-  Z_FINISH. In this case all pending input is processed and all pending
-  output is flushed; avail_out must be large enough to hold all the
-  uncompressed data. (The size of the uncompressed data may have been saved
-  by the compressor for this purpose.) The next operation on this stream must
-  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
-  is never required, but can be used to inform inflate that a faster routine
-  may be used for the single inflate() call.
-
-    inflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if the end of the
-  compressed data has been reached and all uncompressed output has been
-  produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if
-  the stream structure was inconsistent (for example if next_in or next_out
-  was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no
-  progress is possible or if there was not enough room in the output buffer
-  when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then
-  call inflateSync to look for a good compression block.  */
-
-
-extern int inflateEnd OF((z_stream *strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
-   was inconsistent. In the error case, msg may be set but then points to a
-   static string (which must not be deallocated).
-*/
-
-                        /* advanced functions */
-
-extern int inflateInit2 OF((z_stream *strm,
-                            int  windowBits));
-/*   
-     This is another version of inflateInit with more compression options. The
-   fields next_out, zalloc and zfree must be initialized before by the caller.
-
-     The windowBits parameter is the base two logarithm of the maximum window
-   size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library (the value 16 will be allowed soon). The
-   default value is 15 if inflateInit is used instead. If a compressed stream
-   with a larger window size is given as input, inflate() will return with
-   the error code Z_DATA_ERROR instead of trying to allocate a larger window.
-
-     If next_out is not null, the library will use this buffer for the history
-   buffer; the buffer must either be large enough to hold the entire output
-   data, or have at least 1<<windowBits bytes.  If next_out is null, the
-   library will allocate its own buffer (and leave next_out null). next_in
-   need not be provided here but must be provided by the application for the
-   next call of inflate().
-
-     If the history buffer is provided by the application, next_out must
-   never be changed by the application since the decompressor maintains
-   history information inside this buffer from call to call; the application
-   can only reset next_out to the beginning of the history buffer when
-   avail_out is zero and all output has been consumed.
-
-      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   windowBits < 8). msg is set to null if there is no error message.
-   inflateInit2 does not perform any decompression: this will be done by
-   inflate().
-*/
-
-extern int inflateSync OF((z_stream *strm));
-/* 
-    Skips invalid compressed data until the special marker (see deflate()
-  above) can be found, or until all available input is skipped. No output
-  is provided.
-
-    inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
-  if no more input was provided, Z_DATA_ERROR if no marker has been found,
-  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
-  case, the application may save the current current value of total_in which
-  indicates where valid compressed data was found. In the error case, the
-  application may repeatedly call inflateSync, providing more input each time,
-  until success or end of the input data.
-*/
-
-extern int inflateReset OF((z_stream *strm));
-/*
-     This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate all the internal decompression state.
-   The stream will keep attributes that may have been set by inflateInit2.
-
-      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateIncomp OF((z_stream *strm));
-/*
-     This function adds the data at next_in (avail_in bytes) to the output
-   history without performing any output.  There must be no pending output,
-   and the decompressor must be expecting to see the start of a block.
-   Calling this function is equivalent to decompressing a stored block
-   containing the data at next_in (except that the data is not output).
-*/
-
-                        /* checksum functions */
-
-/*
-     This function is not related to compression but is exported
-   anyway because it might be useful in applications using the
-   compression library.
-*/
-
-extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len));
-
-/*
-     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
-   return the updated checksum. If buf is NULL, this function returns
-   the required initial value for the checksum.
-   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
-   much faster. Usage example:
-
-     uLong adler = adler32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       adler = adler32(adler, buffer, length);
-     }
-     if (adler != original_adler) error();
-*/
-
-#ifndef _Z_UTIL_H
-    struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-#endif /* _ZLIB_H */
_



More information about the Linuxppc-dev mailing list