[Patch] Add support for TQM834x Boards
Wolfgang Denk
wd at denx.de
Sun Oct 23 08:06:12 EST 2005
The following patch (against latest 2.6 tree) adds support for the TQ
Systems TQM834x Boards. Verified on TQM8349L.
Note: for TQM834x board support actually to compile and work, two
previously submitted patches are required. See postings:
Sat, 22 Oct 2005 [PATCH 2.6] Add generic support for DS1377 RTC
Sat, 22 Oct 2005 [PATCH] Cleanup mpc83xx_restart() code
---
Add support for TQM834x boards.
Signed-off-by: Marian Balakowicz <m8 at semihalf.com>
Signed-off-by: Wolfgang Denk <wd at denx.de>
---
arch/ppc/Kconfig | 11
arch/ppc/configs/TQM834x_defconfig | 819 ++++++++++++++++++++++++++++++++++++
arch/ppc/platforms/83xx/Makefile | 1
arch/ppc/platforms/83xx/tqm834x.c | 336 +++++++++++++++
arch/ppc/platforms/83xx/tqm834x.h | 40 ++
drivers/mtd/maps/Kconfig | 8
drivers/mtd/maps/Makefile | 1
drivers/mtd/maps/tqm834x.c | 298 +++++++++++++
include/asm-ppc/mpc83xx.h | 4
9 files changed, 1516 insertions(+), 2 deletions(-)
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -690,6 +690,12 @@ config EV64360
help
Select EV64360 if configuring a Marvell EV64360BP Evaluation
platform.
+
+config TQM834x
+ bool "TQM834x"
+ help
+ This option enables support for the TQM834x boards from TQ
+ Components.
endchoice
config PQ2ADS
@@ -730,11 +736,11 @@ config 8272
config 83xx
bool
- default y if MPC834x_SYS
+ default y if MPC834x_SYS || TQM834x
config MPC834x
bool
- default y if MPC834x_SYS
+ default y if MPC834x_SYS || TQM834x
config CPM2
bool
@@ -1170,6 +1176,7 @@ config PCI_DOMAINS
config MPC83xx_PCI2
bool " Supprt for 2nd PCI host controller"
depends on PCI && MPC834x
+ depends on !TQM834x
default y if MPC834x_SYS
config PCI_QSPAN
diff --git a/arch/ppc/configs/TQM834x_defconfig b/arch/ppc/configs/TQM834x_defconfig
new file mode 100644
--- /dev/null
+++ b/arch/ppc/configs/TQM834x_defconfig
@@ -0,0 +1,819 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc4
+# Mon Oct 17 17:22:19 2005
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Processor
+#
+CONFIG_6xx=y
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_POWER3 is not set
+# CONFIG_POWER4 is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_KEXEC is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_PPC_GEN550=y
+CONFIG_PPC_STD_MMU=y
+
+#
+# Platform options
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_APUS is not set
+# CONFIG_KATANA is not set
+# CONFIG_WILLOW is not set
+# CONFIG_CPCI690 is not set
+# CONFIG_POWERPMC250 is not set
+# CONFIG_CHESTNUT is not set
+# CONFIG_SPRUCE is not set
+# CONFIG_HDPU is not set
+# CONFIG_EV64260 is not set
+# CONFIG_LOPEC is not set
+# CONFIG_MVME5100 is not set
+# CONFIG_PPLUS is not set
+# CONFIG_PRPMC750 is not set
+# CONFIG_PRPMC800 is not set
+# CONFIG_SANDPOINT is not set
+# CONFIG_RADSTONE_PPC7D is not set
+# CONFIG_PAL4 is not set
+# CONFIG_GEMINI is not set
+# CONFIG_EST8260 is not set
+# CONFIG_SBC82xx is not set
+# CONFIG_SBS8260 is not set
+# CONFIG_RPX8260 is not set
+# CONFIG_TQM8260 is not set
+# CONFIG_ADS8272 is not set
+# CONFIG_PQ2FADS is not set
+# CONFIG_LITE5200 is not set
+# CONFIG_MPC834x_SYS is not set
+# CONFIG_EV64360 is not set
+CONFIG_TQM834x=y
+CONFIG_83xx=y
+CONFIG_MPC834x=y
+# CONFIG_SMP is not set
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_CFI_I1 is not set
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_TQM834x=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Macintosh device drivers
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+
+#
+# Ethernet (1000 Mbit)
+#
+CONFIG_GIANFAR=y
+# CONFIG_GFAR_NAPI is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_DS1337=y
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ppc/platforms/83xx/Makefile b/arch/ppc/platforms/83xx/Makefile
--- a/arch/ppc/platforms/83xx/Makefile
+++ b/arch/ppc/platforms/83xx/Makefile
@@ -2,3 +2,4 @@
# Makefile for the PowerPC 83xx linux kernel.
#
obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o
+obj-$(CONFIG_TQM834x) += tqm834x.o
diff --git a/arch/ppc/platforms/83xx/tqm834x.c b/arch/ppc/platforms/83xx/tqm834x.c
new file mode 100644
--- /dev/null
+++ b/arch/ppc/platforms/83xx/tqm834x.c
@@ -0,0 +1,336 @@
+/*
+ * arch/ppc/platforms/83xx/tqm834x.c
+ *
+ * TQ Components TQM834x board routines
+ *
+ * Copyright 2005 DENX Software Engineering
+ * Derived from mpc834x_sys.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/tty.h> /* for linux/serial_core.h */
+#include <linux/serial_core.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc83xx.h>
+#include <asm/irq.h>
+#include <asm/kgdb.h>
+#include <asm/ppc_sys.h>
+#include <mm/mmu_decl.h>
+
+#include <syslib/ppc83xx_setup.h>
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+extern unsigned long total_memory; /* in mm/init */
+
+unsigned char __res[sizeof (bd_t)];
+
+#ifdef CONFIG_PCI
+int
+mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x11 */
+ {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x12 */
+ {PIRQD, PIRQA, PIRQB, PIRQC} /* idsel 0x13 */
+ };
+
+ const long min_idsel = 0x11, max_idsel = 0x13, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+int
+mpc83xx_exclude_device(u_char bus, u_char devfn)
+{
+ return PCIBIOS_SUCCESSFUL;
+}
+#endif /* CONFIG_PCI */
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init
+tqm834x_setup_arch(void)
+{
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
+ struct gianfar_platform_data *pdata;
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ /* Set loops_per_jiffy to a half-way reasonable value,
+ for use until calibrate_delay gets called. */
+ loops_per_jiffy = freq / HZ;
+
+#ifdef CONFIG_PCI
+ /* setup PCI host bridges */
+ mpc83xx_setup_hose();
+#endif
+ mpc83xx_early_serial_map();
+
+ /* setup the board related information for the enet controllers */
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC1);
+ if (pdata) {
+ pdata->board_flags = FSL_GIANFAR_BRD_IS_REDUCED;
+ pdata->interruptPHY = MPC83xx_IRQ_EXT1;
+ pdata->phyid = 0;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+ }
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC2);
+ if (pdata) {
+ pdata->board_flags = FSL_GIANFAR_BRD_IS_REDUCED;
+ pdata->interruptPHY = MPC83xx_IRQ_EXT1;
+ pdata->phyid = 1;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+ }
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+}
+
+static void __init
+tqm834x_map_io(void)
+{
+ /* we steal the lowest ioremap addr for virt space */
+ io_block_mapping(VIRT_IMMRBAR, immrbar, 1024*1024, _PAGE_IO);
+}
+
+int
+tqm834x_show_cpuinfo(struct seq_file *m)
+{
+ uint pvid, svid, phid1;
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ pvid = mfspr(SPRN_PVR);
+ svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: Freescale Inc.\n");
+ seq_printf(m, "Machine\t\t: TQM%s\n", cur_ppc_sys_spec->ppc_sys_name);
+ seq_printf(m, "core clock\t: %d MHz\n"
+ "bus clock\t: %d MHz\n",
+ (int)(binfo->bi_intfreq / 1000000),
+ (int)(binfo->bi_busfreq / 1000000));
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ /* Display cpu Pll setting */
+ phid1 = mfspr(SPRN_HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", (int)(binfo->bi_memsize / (1024 * 1024)));
+
+ return 0;
+}
+
+void __init
+tqm834x_init_IRQ(void)
+{
+ bd_t *binfo = (bd_t *) __res;
+
+ u8 senses[8] = {
+ 0, /* EXT 0 */
+ 0, /* EXT 1 */
+ 0, /* EXT 2 */
+ 0, /* EXT 3 */
+#ifdef CONFIG_PCI
+ IRQ_SENSE_LEVEL, /* EXT 4 */
+ IRQ_SENSE_LEVEL, /* EXT 5 */
+ IRQ_SENSE_LEVEL, /* EXT 6 */
+ IRQ_SENSE_LEVEL, /* EXT 7 */
+#else
+ 0, /* EXT 4 */
+ 0, /* EXT 5 */
+ 0, /* EXT 6 */
+ 0, /* EXT 7 */
+#endif
+ };
+
+ ipic_init(binfo->bi_immr_base + 0x00700, 0, MPC83xx_IPIC_IRQ_OFFSET, senses, 8);
+
+ /* Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ ipic_set_default_priority();
+}
+
+#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1337)
+extern ulong ds1337_get_rtc_time(void);
+extern int ds1337_set_rtc_time(unsigned long nowtime);
+
+static int __init
+tqm834x_rtc_hookup(void)
+{
+ struct timespec tv;
+
+ ppc_md.set_rtc_time = ds1337_set_rtc_time;
+ ppc_md.get_rtc_time = ds1337_get_rtc_time;
+
+ tv.tv_nsec = 0;
+ tv.tv_sec = (ppc_md.get_rtc_time)();
+ do_settimeofday(&tv);
+
+ return 0;
+}
+late_initcall(tqm834x_rtc_hookup);
+#endif
+
+static __inline__ void
+tqm834x_set_bat(void)
+{
+ /* we steal the lowest ioremap addr for virt space */
+ mb();
+ mtspr(SPRN_DBAT1U, VIRT_IMMRBAR | 0x1e);
+ mtspr(SPRN_DBAT1L, immrbar | 0x2a);
+ mb();
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ bd_t *binfo = (bd_t *) __res;
+
+ /* parse_bootinfo must always be called first */
+ parse_bootinfo(find_bootinfo());
+
+ /*
+ * If we were passed in a board information, copy it into the
+ * residual data area.
+ */
+ if (r3) {
+ memcpy((void *) __res, (void *) (r3 + KERNELBASE),
+ sizeof (bd_t));
+ }
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+ /*
+ * If the init RAM disk has been configured in, and there's a valid
+ * starting address for it, set it up.
+ */
+ if (r4) {
+ initrd_start = r4 + KERNELBASE;
+ initrd_end = r5 + KERNELBASE;
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+ /* Copy the kernel command line arguments to a safe place. */
+ if (r6) {
+ *(char *) (r7 + KERNELBASE) = 0;
+ strcpy(cmd_line, (char *) (r6 + KERNELBASE));
+ }
+
+ immrbar = binfo->bi_immr_base;
+
+ tqm834x_set_bat();
+
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
+ {
+ struct uart_port p;
+
+ memset(&p, 0, sizeof (p));
+ p.iotype = SERIAL_IO_MEM;
+ p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4500);
+ p.uartclk = binfo->bi_busfreq;
+
+ gen550_init(0, &p);
+
+ memset(&p, 0, sizeof (p));
+ p.iotype = SERIAL_IO_MEM;
+ p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4600);
+ p.uartclk = binfo->bi_busfreq;
+
+ gen550_init(1, &p);
+ }
+#endif
+
+ identify_ppc_sys_by_id(mfspr(SPRN_SVR));
+
+ /* setup the PowerPC module struct */
+ ppc_md.setup_arch = tqm834x_setup_arch;
+ ppc_md.show_cpuinfo = tqm834x_show_cpuinfo;
+
+ ppc_md.init_IRQ = tqm834x_init_IRQ;
+ ppc_md.get_irq = ipic_get_irq;
+
+ ppc_md.restart = mpc83xx_restart;
+ ppc_md.power_off = mpc83xx_power_off;
+ ppc_md.halt = mpc83xx_halt;
+
+ ppc_md.find_end_of_memory = mpc83xx_find_end_of_memory;
+ ppc_md.setup_io_mappings = tqm834x_map_io;
+
+ ppc_md.time_init = mpc83xx_time_init;
+ ppc_md.set_rtc_time = NULL;
+ ppc_md.get_rtc_time = NULL;
+ ppc_md.calibrate_decr = mpc83xx_calibrate_decr;
+
+ ppc_md.early_serial_map = mpc83xx_early_serial_map;
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
+ ppc_md.progress = gen550_progress;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+
+ if (ppc_md.progress)
+ ppc_md.progress("tqm834x_init(): exit", 0);
+
+ return;
+}
diff --git a/arch/ppc/platforms/83xx/tqm834x.h b/arch/ppc/platforms/83xx/tqm834x.h
new file mode 100644
--- /dev/null
+++ b/arch/ppc/platforms/83xx/tqm834x.h
@@ -0,0 +1,40 @@
+/*
+ * arch/ppc/platforms/83xx/tqm834x.h
+ *
+ * TQ Components TQM834x common board definitions
+ *
+ * Copyright 2005 DENX Software Engineering
+ * Derived from mpc834x_sys.h
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_TQM834X_H__
+#define __MACH_TQM834X_H__
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <syslib/ppc83xx_setup.h>
+#include <asm/ppcboot.h>
+
+#define VIRT_IMMRBAR ((uint)0xfe000000)
+
+#define PIRQA MPC83xx_IRQ_EXT4
+#define PIRQB MPC83xx_IRQ_EXT5
+#define PIRQC MPC83xx_IRQ_EXT6
+#define PIRQD MPC83xx_IRQ_EXT7
+
+#define MPC83xx_PCI1_LOWER_IO 0x00000000
+#define MPC83xx_PCI1_UPPER_IO 0x00ffffff
+#define MPC83xx_PCI1_LOWER_MEM 0x80000000
+#define MPC83xx_PCI1_UPPER_MEM 0x9fffffff
+#define MPC83xx_PCI1_IO_BASE 0xe2000000
+#define MPC83xx_PCI1_MEM_OFFSET 0x00000000
+#define MPC83xx_PCI1_IO_SIZE 0x01000000
+
+#endif /* __MACH_TQM834X_H__ */
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -340,6 +340,14 @@ config MTD_REDWOOD
Redwood board. If you have one of these boards and would like to
use the flash chips on it, say 'Y'.
+config MTD_TQM834x
+ tristate "Flash device mapped on TQ Components TQM834x Boards"
+ depends on MTD_CFI && PPC32 && 83xx && TQM834x
+ help
+ This enables access routines for the flash chips on the
+ TQ Components TQM834x boards. If you have one of these boards
+ and would like to use the flash chips on it, say 'Y'.
+
config MTD_CSTM_MIPS_IXX
tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board"
depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -70,3 +70,4 @@ obj-$(CONFIG_MTD_DMV182) += dmv182.o
obj-$(CONFIG_MTD_SHARP_SL) += sharpsl-flash.o
obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
+obj-$(CONFIG_MTD_TQM834x) += tqm834x.o
diff --git a/drivers/mtd/maps/tqm834x.c b/drivers/mtd/maps/tqm834x.c
new file mode 100644
--- /dev/null
+++ b/drivers/mtd/maps/tqm834x.c
@@ -0,0 +1,298 @@
+/*
+ * drivers/mtd/maps/tqm834x.c
+ *
+ * MTD mapping driver for TQM834x boards
+ *
+ * Copyright 2005 Wolfgang Denk, DENX Software Engineering, <wd at denx.de>.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <asm/io.h>
+#include <asm/ppcboot.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#if 0 /* Debugging turned off */
+# define debugk(fmt,args...) printk(fmt ,##args)
+#else
+# define debugk(fmt,args...)
+#endif
+
+#define FLASH_BANK_MAX 2
+
+extern unsigned char __res[];
+
+/* trivial struct to describe partition information */
+struct mtd_part_def
+{
+ int nums;
+ unsigned char *type;
+ struct mtd_partition* mtd_part;
+};
+
+static struct mtd_info* mtd_banks[FLASH_BANK_MAX];
+static struct map_info* map_banks[FLASH_BANK_MAX];
+static struct mtd_part_def part_banks[FLASH_BANK_MAX];
+
+static unsigned long num_banks;
+static unsigned long start_scan_addr;
+
+#ifdef CONFIG_MTD_PARTITIONS
+/*
+ * The following defines the partition layout of TQM834x boards.
+ *
+ * See include/linux/mtd/partitions.h for definition of the
+ * mtd_partition structure.
+ *
+ * Assume minimal initial size of 4 MiB per bank, will be updated
+ * later in init_tqm834x_mtd() routine.
+ */
+
+/* Partition definition for the first flash bank which is always present. */
+static struct mtd_partition tqm834x_partitions_bank1[] = {
+ {
+ name: "u-boot", /* u-boot firmware */
+ offset: 0x00000000,
+ size: 0x00040000, /* 256 KiB */
+ /*mask_flags: MTD_WRITEABLE, * force read-only */
+ },
+ {
+ name: "env", /* u-boot environment */
+ offset: 0x00040000,
+ size: 0x00020000, /* 128 KiB */
+ /*mask_flags: MTD_WRITEABLE, * force read-only */
+ },
+ {
+ name: "kernel", /* linux kernel image */
+ offset: 0x00060000,
+ size: 0x00100000, /* 1 MiB */
+ /*mask_flags: MTD_WRITEABLE, * force read-only */
+ },
+ {
+ name: "initrd", /* ramdisk image */
+ offset: 0x00160000,
+ size: 0x00200000, /* 2 MiB */
+ },
+ {
+ name: "user", /* user data */
+ offset: 0x00360000,
+ size: 0x000a0000, /* remaining space */
+ /* NOTE: this parttion size is re-calcated in */
+ /* init_tqm834x_mtd() to cover actual remaining space. */
+ },
+};
+
+/* Partition definition for the second flash bank which may be present on some
+ * TQM834x boards.
+ */
+static struct mtd_partition tqm834x_partitions_bank2[] = {
+ {
+ name: "jffs2", /* jffs2 filesystem */
+ offset: 0x00000000,
+ size: 0x00400000, /* whole device */
+ /* NOTE: this parttion size is re-calcated in */
+ /* init_tqm834x_mtd() to cover actual device size. */
+ },
+};
+
+#endif /* CONFIG_MTD_PARTITIONS */
+
+#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
+
+int __init init_tqm834x_mtd(void)
+{
+ int idx = 0, ret = 0;
+ unsigned long flash_addr, flash_size, mtd_size = 0;
+
+ /* pointer to TQM834x board info data */
+ bd_t *bd = (bd_t *)__res;
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+ int n;
+ char mtdid[4];
+ const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+ flash_addr = bd->bi_flashstart;
+ flash_size = bd->bi_flashsize;
+
+ /* request maximum flash size address space */
+ start_scan_addr = (unsigned long)ioremap(flash_addr, flash_size);
+ if (!start_scan_addr) {
+ printk("%s: Failed to ioremap address: 0x%lx\n",
+ __FUNCTION__, flash_addr);
+ return -EIO;
+ }
+
+ for(idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
+ if (mtd_size >= flash_size)
+ break;
+
+ debugk ("%s: chip probing count %d\n", __FUNCTION__, idx);
+
+ map_banks[idx] = (struct map_info *)kmalloc(sizeof(struct map_info),
+ GFP_KERNEL);
+ if (map_banks[idx] == NULL) {
+ ret = -ENOMEM;
+ goto error_mem;
+ }
+ memset((void *)map_banks[idx], 0, sizeof(struct map_info));
+ map_banks[idx]->name = (char *)kmalloc(16, GFP_KERNEL);
+ if (map_banks[idx]->name == NULL) {
+ ret = -ENOMEM;
+ goto error_mem;
+ }
+ memset((void *)map_banks[idx]->name, 0, 16);
+
+ sprintf(map_banks[idx]->name, "TQM834x-%d", idx);
+ map_banks[idx]->size = flash_size;
+ map_banks[idx]->bankwidth = 4;
+
+ simple_map_init(map_banks[idx]);
+
+ map_banks[idx]->virt = (void __iomem *)
+ (start_scan_addr + ((idx > 0) ?
+ (mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0));
+ map_banks[idx]->phys =
+ flash_addr + ((idx > 0) ?
+ (mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0);
+
+ /* start to probe flash chips */
+ mtd_banks[idx] = do_map_probe("cfi_probe", map_banks[idx]);
+ if (mtd_banks[idx]) {
+ mtd_banks[idx]->owner = THIS_MODULE;
+ mtd_size += mtd_banks[idx]->size;
+ num_banks++;
+ debugk ("%s: bank %ld, name: %s, size: %d bytes \n",
+ __FUNCTION__, num_banks,
+ mtd_banks[idx]->name, mtd_banks[idx]->size);
+ }
+ }
+
+ /* no supported flash chips found */
+ if (!num_banks) {
+ printk("TQM834x: No supported flash chips found!\n");
+ ret = -ENXIO;
+ goto error_mem;
+ }
+
+#ifdef CONFIG_MTD_PARTITIONS
+ /*
+ * Select static partition definitions
+ */
+ n = NB_OF(tqm834x_partitions_bank1);
+ part_banks[0].mtd_part = tqm834x_partitions_bank1;
+ part_banks[0].type = "static image bank1";
+ part_banks[0].nums = n;
+
+ /* update last partition size to cover actual remaining space */
+ tqm834x_partitions_bank1[n - 1].size =
+ mtd_banks[0]->size -
+ tqm834x_partitions_bank1[n - 1].offset;
+
+ /* check if we have second bank? */
+ if (num_banks == 2) {
+ n = NB_OF(tqm834x_partitions_bank2);
+ part_banks[1].mtd_part = tqm834x_partitions_bank2;
+ part_banks[1].type = "static image bank2";
+ part_banks[1].nums = n;
+
+ /* update last partition size to cover actual remaining space */
+ tqm834x_partitions_bank2[n - 1].size =
+ mtd_banks[1]->size -
+ tqm834x_partitions_bank2[n - 1].offset;
+ }
+
+ for(idx = 0; idx < num_banks ; idx++) {
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+ sprintf(mtdid, "%d", idx);
+ n = parse_mtd_partitions(mtd_banks[idx],
+ part_probes,
+ &part_banks[idx].mtd_part,
+ 0);
+ debugk ("%s: %d command line partitions on bank %s\n",
+ __FUNCTION__, n, mtdid);
+ if (n > 0) {
+ part_banks[idx].type = "command line";
+ part_banks[idx].nums = n;
+ }
+#endif /* CONFIG_MTD_CMDLINE_PARTS */
+ if (part_banks[idx].nums == 0) {
+ printk (KERN_NOTICE
+ "TQM834x flash bank %d: no partition info "
+ "available, registering whole device\n", idx);
+ add_mtd_device(mtd_banks[idx]);
+ } else {
+ printk (KERN_NOTICE
+ "TQM834x flash bank %d: Using %s partition "
+ "definition\n", idx, part_banks[idx].type);
+ add_mtd_partitions (mtd_banks[idx],
+ part_banks[idx].mtd_part,
+ part_banks[idx].nums);
+ }
+ }
+#else /* ! CONFIG_MTD_PARTITIONS */
+ printk (KERN_NOTICE "TQM834x flash: registering %d flash banks "
+ "at once\n", num_banks);
+
+ for(idx = 0 ; idx < num_banks ; idx++) {
+ add_mtd_device(mtd_banks[idx]);
+ }
+#endif /* CONFIG_MTD_PARTITIONS */
+
+ return 0;
+error_mem:
+ for (idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
+ if (map_banks[idx] != NULL) {
+ if (map_banks[idx]->name != NULL) {
+ kfree(map_banks[idx]->name);
+ map_banks[idx]->name = NULL;
+ }
+ kfree(map_banks[idx]);
+ map_banks[idx] = NULL;
+ }
+ }
+
+ iounmap((void *)start_scan_addr);
+
+ return ret;
+}
+
+static void __exit cleanup_tqm834x_mtd(void)
+{
+ unsigned int idx = 0;
+ for(idx = 0 ; idx < num_banks ; idx++) {
+ /* destroy mtd_info previously allocated */
+ if (mtd_banks[idx]) {
+ del_mtd_partitions(mtd_banks[idx]);
+ map_destroy(mtd_banks[idx]);
+ }
+
+ /* release map_info not used anymore */
+ kfree(map_banks[idx]->name);
+ kfree(map_banks[idx]);
+ }
+
+ if (start_scan_addr) {
+ iounmap((void *)start_scan_addr);
+ start_scan_addr = 0;
+ }
+}
+
+module_init(init_tqm834x_mtd);
+module_exit(cleanup_tqm834x_mtd);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Wolfgang Denk <wd at denx.de>");
+MODULE_DESCRIPTION("MTD map driver for TQM834x boards");
diff --git a/include/asm-ppc/mpc83xx.h b/include/asm-ppc/mpc83xx.h
--- a/include/asm-ppc/mpc83xx.h
+++ b/include/asm-ppc/mpc83xx.h
@@ -26,6 +26,10 @@
#include <platforms/83xx/mpc834x_sys.h>
#endif
+#ifdef CONFIG_TQM834x
+#include <platforms/83xx/tqm834x.h>
+#endif
+
#define _IO_BASE isa_io_base
#define _ISA_MEM_BASE isa_mem_base
#ifdef CONFIG_PCI
More information about the Linuxppc-dev
mailing list