Need test: 2.6.14: Fix IRQ race in USB sleep/wakeup code]
Benjamin Herrenschmidt
benh at kernel.crashing.org
Thu Nov 10 08:50:22 EST 2005
Here's a patch that fixes a race in the USB code with sleep/wakeup.
It's against 2.6.14 and I'd like to see it in the stable series as
powerbook sleep crashes without it, but it needs a little bit of
field testing first. So I would appreciate if ppl could give it a
go and let me know if it doesn't seem to cause any regression (or
if it does of course ;)
Ben.
Index: 2.6.14-ben/drivers/usb/core/hcd-pci.c
===================================================================
--- 2.6.14-ben.orig/drivers/usb/core/hcd-pci.c
+++ 2.6.14-ben/drivers/usb/core/hcd-pci.c
@@ -32,6 +32,13 @@
#include <linux/usb.h>
#include "hcd.h"
+#ifdef CONFIG_PPC_PMAC
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/pci-bridge.h>
+#include <asm/prom.h>
+#endif
+
/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
@@ -278,6 +285,18 @@ int usb_hcd_pci_suspend (struct pci_dev
break;
}
+#ifdef CONFIG_PPC_PMAC
+ if (retval == 0 && _machine == _MACH_Pmac) {
+ struct device_node *of_node;
+
+ /* Disable USB PAD & cell clock */
+ of_node = pci_device_to_OF_node (to_pci_dev(hcd->self.
+ controller));
+ if (of_node)
+ pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0);
+ }
+#endif /* CONFIG_PPC_PMAC */
+
/* update power_state **ONLY** to make sysfs happier */
if (retval == 0)
dev->dev.power.power_state = message;
@@ -303,6 +322,18 @@ int usb_hcd_pci_resume (struct pci_dev *
return 0;
}
+#ifdef CONFIG_PPC_PMAC
+ if (_machine == _MACH_Pmac) {
+ struct device_node *of_node;
+
+ /* Re-enable USB PAD & cell clock */
+ of_node = pci_device_to_OF_node (to_pci_dev(hcd->self.
+ controller));
+ if (of_node)
+ pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 1);
+ }
+#endif /* CONFIG_PPC_PMAC */
+
/* NOTE: chip docs cover clean "real suspend" cases (what Linux
* calls "standby", "suspend to RAM", and so on). There are also
* dirty cases when swsusp fakes a suspend in "shutdown" mode.
Index: 2.6.14-ben/drivers/usb/core/hcd.c
===================================================================
--- 2.6.14-ben.orig/drivers/usb/core/hcd.c
+++ 2.6.14-ben/drivers/usb/core/hcd.c
@@ -1600,7 +1600,8 @@ irqreturn_t usb_hcd_irq (int irq, void *
struct usb_hcd *hcd = __hcd;
int start = hcd->state;
- if (start == HC_STATE_HALT)
+ if (start == HC_STATE_HALT ||
+ !test_bit(HC_FLAG_IRQ_ON, &hcd->bitflags))
return IRQ_NONE;
if (hcd->driver->irq (hcd, r) == IRQ_NONE)
return IRQ_NONE;
@@ -1736,6 +1737,9 @@ int usb_add_hcd(struct usb_hcd *hcd,
if (hcd->driver->irq) {
char buf[8], *bufp = buf;
+ set_bit(HC_FLAG_IRQ_ON, &hcd->bitflags);
+ mb();
+
#ifdef __sparc__
bufp = __irq_itoa(irqnum);
#else
Index: 2.6.14-ben/drivers/usb/core/hcd.h
===================================================================
--- 2.6.14-ben.orig/drivers/usb/core/hcd.h
+++ 2.6.14-ben/drivers/usb/core/hcd.h
@@ -71,6 +71,9 @@ struct usb_hcd { /* usb_bus.hcpriv point
/*
* hardware info/state
*/
+ unsigned long bitflags; /* various single-bit flags */
+#define HC_FLAG_IRQ_ON 0
+
const struct hc_driver *driver; /* hw-specific hooks */
unsigned saw_irq : 1;
unsigned can_wakeup:1; /* hw supports wakeup? */
Index: 2.6.14-ben/drivers/usb/host/ehci-hcd.c
===================================================================
--- 2.6.14-ben.orig/drivers/usb/host/ehci-hcd.c
+++ 2.6.14-ben/drivers/usb/host/ehci-hcd.c
@@ -750,6 +750,12 @@ static int ehci_suspend (struct usb_hcd
if (time_before (jiffies, ehci->next_statechange))
msleep (100);
+ /* Disable emission of interrupts during suspend */
+ writel(0, &ehci->regs->intr_enable);
+ mb();
+ clear_bit(HC_FLAG_IRQ_ON, &hcd->bitflags);
+ synchronize_irq(to_pci_dev(hcd->self.controller)->irq);
+
#ifdef CONFIG_USB_SUSPEND
(void) usb_suspend_device (hcd->self.root_hub, message);
#else
@@ -776,6 +782,8 @@ static int ehci_resume (struct usb_hcd *
if (time_before (jiffies, ehci->next_statechange))
msleep (100);
+ set_bit(HC_FLAG_IRQ_ON, &hcd->bitflags);
+
/* If any port is suspended (or owned by the companion),
* we know we can/must resume the HC (and mustn't reset it).
*/
Index: 2.6.14-ben/drivers/usb/host/ehci-q.c
===================================================================
--- 2.6.14-ben.orig/drivers/usb/host/ehci-q.c
+++ 2.6.14-ben/drivers/usb/host/ehci-q.c
@@ -926,6 +926,11 @@ submit_async (
#endif
spin_lock_irqsave (&ehci->lock, flags);
+ if (HC_IS_SUSPENDED(ehci_to_hcd(ehci)->state)) {
+ spin_unlock_irqrestore (&ehci->lock, flags);
+ return -ESHUTDOWN;
+ }
+
qh = qh_append_tds (ehci, urb, qtd_list, epnum, &ep->hcpriv);
/* Control/bulk operations through TTs don't need scheduling,
Index: 2.6.14-ben/drivers/usb/host/ehci-sched.c
===================================================================
--- 2.6.14-ben.orig/drivers/usb/host/ehci-sched.c
+++ 2.6.14-ben/drivers/usb/host/ehci-sched.c
@@ -602,6 +602,11 @@ static int intr_submit (
spin_lock_irqsave (&ehci->lock, flags);
+ if (HC_IS_SUSPENDED(ehci_to_hcd(ehci)->state)) {
+ spin_unlock_irqrestore (&ehci->lock, flags);
+ return -ESHUTDOWN;
+ }
+
/* get qh and force any scheduling errors */
INIT_LIST_HEAD (&empty);
qh = qh_append_tds (ehci, urb, &empty, epnum, &ep->hcpriv);
@@ -1456,6 +1461,11 @@ static int itd_submit (struct ehci_hcd *
/* schedule ... need to lock */
spin_lock_irqsave (&ehci->lock, flags);
+ if (HC_IS_SUSPENDED(ehci_to_hcd(ehci)->state)) {
+ spin_unlock_irqrestore (&ehci->lock, flags);
+ status = -ESHUTDOWN;
+ goto done;
+ }
status = iso_stream_schedule (ehci, urb, stream);
if (likely (status == 0))
itd_link_urb (ehci, urb, ehci->periodic_size << 3, stream);
@@ -1815,6 +1825,11 @@ static int sitd_submit (struct ehci_hcd
/* schedule ... need to lock */
spin_lock_irqsave (&ehci->lock, flags);
+ if (HC_IS_SUSPENDED(ehci_to_hcd(ehci)->state)) {
+ spin_unlock_irqrestore (&ehci->lock, flags);
+ status = -ESHUTDOWN;
+ goto done;
+ }
status = iso_stream_schedule (ehci, urb, stream);
if (status == 0)
sitd_link_urb (ehci, urb, ehci->periodic_size << 3, stream);
Index: 2.6.14-ben/drivers/usb/host/ohci-hcd.c
===================================================================
--- 2.6.14-ben.orig/drivers/usb/host/ohci-hcd.c
+++ 2.6.14-ben/drivers/usb/host/ohci-hcd.c
@@ -252,6 +252,10 @@ static int ohci_urb_enqueue (
spin_lock_irqsave (&ohci->lock, flags);
+ if (HC_IS_SUSPENDED(hcd->state)) {
+ retval = -ESHUTDOWN;
+ goto fail;
+ }
/* don't submit to a dead HC */
if (!HC_IS_RUNNING(hcd->state)) {
retval = -ENODEV;
Index: 2.6.14-ben/drivers/usb/host/ohci-hub.c
===================================================================
--- 2.6.14-ben.orig/drivers/usb/host/ohci-hub.c
+++ 2.6.14-ben/drivers/usb/host/ohci-hub.c
@@ -219,13 +219,6 @@ static int ohci_hub_resume (struct usb_h
/* Sometimes PCI D3 suspend trashes frame timings ... */
periodic_reinit (ohci);
- /* interrupts might have been disabled */
- ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable);
- if (ohci->ed_rm_list)
- ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable);
- ohci_writel (ohci, ohci_readl (ohci, &ohci->regs->intrstatus),
- &ohci->regs->intrstatus);
-
/* Then re-enable operations */
ohci_writel (ohci, OHCI_USB_OPER, &ohci->regs->control);
(void) ohci_readl (ohci, &ohci->regs->control);
@@ -241,6 +234,13 @@ static int ohci_hub_resume (struct usb_h
/* TRSMRCY */
msleep (10);
+ /* interrupts might have been disabled */
+ ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable);
+ if (ohci->ed_rm_list)
+ ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable);
+ ohci_writel (ohci, ohci_readl (ohci, &ohci->regs->intrstatus),
+ &ohci->regs->intrstatus);
+
/* keep it alive for ~5x suspend + resume costs */
ohci->next_statechange = jiffies + msecs_to_jiffies (250);
Index: 2.6.14-ben/drivers/usb/host/ohci-pci.c
===================================================================
--- 2.6.14-ben.orig/drivers/usb/host/ohci-pci.c
+++ 2.6.14-ben/drivers/usb/host/ohci-pci.c
@@ -14,13 +14,6 @@
* This file is licenced under the GPL.
*/
-#ifdef CONFIG_PPC_PMAC
-#include <asm/machdep.h>
-#include <asm/pmac_feature.h>
-#include <asm/pci-bridge.h>
-#include <asm/prom.h>
-#endif
-
#ifndef CONFIG_PCI
#error "This file is PCI bus glue. CONFIG_PCI must be defined."
#endif
@@ -118,6 +111,12 @@ static int ohci_pci_suspend (struct usb_
if (time_before (jiffies, ohci->next_statechange))
msleep (100);
+ /* Disable emission of interrupts during suspend */
+ ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+ mb();
+ clear_bit(HC_FLAG_IRQ_ON, &hcd->bitflags);
+ synchronize_irq(to_pci_dev(hcd->self.controller)->irq);
+
#ifdef CONFIG_USB_SUSPEND
(void) usb_suspend_device (hcd->self.root_hub, message);
#else
@@ -129,16 +128,6 @@ static int ohci_pci_suspend (struct usb_
/* let things settle down a bit */
msleep (100);
-#ifdef CONFIG_PPC_PMAC
- if (_machine == _MACH_Pmac) {
- struct device_node *of_node;
-
- /* Disable USB PAD & cell clock */
- of_node = pci_device_to_OF_node (to_pci_dev(hcd->self.controller));
- if (of_node)
- pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0);
- }
-#endif /* CONFIG_PPC_PMAC */
return 0;
}
@@ -148,20 +137,11 @@ static int ohci_pci_resume (struct usb_h
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int retval = 0;
-#ifdef CONFIG_PPC_PMAC
- if (_machine == _MACH_Pmac) {
- struct device_node *of_node;
-
- /* Re-enable USB PAD & cell clock */
- of_node = pci_device_to_OF_node (to_pci_dev(hcd->self.controller));
- if (of_node)
- pmac_call_feature (PMAC_FTR_USB_ENABLE, of_node, 0, 1);
- }
-#endif /* CONFIG_PPC_PMAC */
-
/* resume root hub */
if (time_before (jiffies, ohci->next_statechange))
msleep (100);
+ set_bit(HC_FLAG_IRQ_ON, &hcd->bitflags);
+
#ifdef CONFIG_USB_SUSPEND
/* get extra cleanup even if remote wakeup isn't in use */
retval = usb_resume_device (hcd->self.root_hub);
Index: 2.6.14-ben/drivers/usb/host/uhci-hcd.c
===================================================================
--- 2.6.14-ben.orig/drivers/usb/host/uhci-hcd.c
+++ 2.6.14-ben/drivers/usb/host/uhci-hcd.c
@@ -797,6 +797,11 @@ static int uhci_suspend(struct usb_hcd *
done:
spin_unlock_irq(&uhci->lock);
+ if (rc == 0) {
+ mb();
+ clear_bit(HC_FLAG_IRQ_ON, &hcd->bitflags);
+ synchronize_irq(hcd->irq);
+ }
return rc;
}
@@ -818,6 +823,8 @@ static int uhci_resume(struct usb_hcd *h
* system wakeup. Check it and reconfigure to avoid problems.
*/
check_and_reset_hc(uhci);
+ set_bit(HC_FLAG_IRQ_ON, &hcd->bitflags);
+ mb();
configure_hc(uhci);
#ifndef CONFIG_USB_SUSPEND
More information about the Linuxppc-dev
mailing list