[PATCH]PPC4XX Dma fixes, burst and sg improvements
Colin Wernham
cwernham at airspan.com
Mon Jan 31 20:04:00 EST 2005
Here's the resubmitted patches for PPC4XX DMA improvements/fixes. If
these are still mangled by my mailer then I'll resend them as attachments.
Colin.
===============================================================
--- linux-2.6.10/arch/ppc/syslib/ppc4xx_dma.c 2004-12-24
21:35:40.000000000 +0000
+++ linux-current/arch/ppc/syslib/ppc4xx_dma.c 2005-01-19
15:34:30.000000000 +0000
@@ -512,6 +512,8 @@ ppc4xx_get_channel_config(unsigned int d
return DMA_STATUS_BAD_CHANNEL;
}
+ memcpy(p_dma_ch, &dma_channels[dmanr], sizeof (ppc_dma_ch_t));
+
#if DCRN_POL > 0
polarity = mfdcr(DCRN_POL);
#else
@@ -604,6 +606,84 @@ ppc4xx_get_peripheral_width(unsigned int
return (GET_DMA_PW(control));
}
+/*
+ * Clears the channel status bits
+ */
+int
+ppc4xx_clr_dma_status(unsigned int dmanr)
+{
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk(KERN_ERR "ppc4xx_clr_dma_status: bad channel: %d\n", dmanr);
+ return DMA_STATUS_BAD_CHANNEL;
+ }
+ mtdcr(DCRN_DMASR, ((u32)DMA_CH0_ERR | (u32)DMA_CS0 | (u32)DMA_TS0) >>
dmanr);
+ return DMA_STATUS_GOOD;
+}
+
+/*
+ * Enables the burst on the channel (BTEN bit in the control/count
register)
+ * Note:
+ * For scatter/gather dma, this function MUST be called before the
+ * ppc4xx_alloc_dma_handle() func as the chan count register is copied
into the
+ * sgl list and used as each sgl element is added.
+ */
+int
+ppc4xx_enable_burst(unsigned int dmanr)
+{
+ unsigned int ctc;
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk(KERN_ERR "ppc4xx_enable_burst: bad channel: %d\n", dmanr);
+ return DMA_STATUS_BAD_CHANNEL;
+ }
+ ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) | DMA_CTC_BTEN;
+ mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
+ return DMA_STATUS_GOOD;
+}
+/*
+ * Disables the burst on the channel (BTEN bit in the control/count
register)
+ * Note:
+ * For scatter/gather dma, this function MUST be called before the
+ * ppc4xx_alloc_dma_handle() func as the chan count register is copied
into the
+ * sgl list and used as each sgl element is added.
+ */
+int
+ppc4xx_disable_burst(unsigned int dmanr)
+{
+ unsigned int ctc;
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk(KERN_ERR "ppc4xx_disable_burst: bad channel: %d\n", dmanr);
+ return DMA_STATUS_BAD_CHANNEL;
+ }
+ ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) &~ DMA_CTC_BTEN;
+ mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
+ return DMA_STATUS_GOOD;
+}
+/*
+ * Sets the burst size (number of peripheral widths) for the channel
+ * (BSIZ bits in the control/count register))
+ * must be one of:
+ * DMA_CTC_BSIZ_2
+ * DMA_CTC_BSIZ_4
+ * DMA_CTC_BSIZ_8
+ * DMA_CTC_BSIZ_16
+ * Note:
+ * For scatter/gather dma, this function MUST be called before the
+ * ppc4xx_alloc_dma_handle() func as the chan count register is copied
into the
+ * sgl list and used as each sgl element is added.
+ */
+int
+ppc4xx_set_burst_size(unsigned int dmanr, unsigned int bsize)
+{
+ unsigned int ctc;
+ if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+ printk(KERN_ERR "ppc4xx_set_burst_size: bad channel: %d\n", dmanr);
+ return DMA_STATUS_BAD_CHANNEL;
+ }
+ ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) &~ DMA_CTC_BSIZ_MSK;
+ ctc |= (bsize & DMA_CTC_BSIZ_MSK);
+ mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
+ return DMA_STATUS_GOOD;
+}
EXPORT_SYMBOL(ppc4xx_init_dma_channel);
EXPORT_SYMBOL(ppc4xx_get_channel_config);
@@ -622,3 +702,7 @@ EXPORT_SYMBOL(ppc4xx_get_dma_residue);
EXPORT_SYMBOL(ppc4xx_enable_dma_interrupt);
EXPORT_SYMBOL(ppc4xx_disable_dma_interrupt);
EXPORT_SYMBOL(ppc4xx_get_dma_status);
+EXPORT_SYMBOL(ppc4xx_clr_dma_status);
+EXPORT_SYMBOL(ppc4xx_enable_burst);
+EXPORT_SYMBOL(ppc4xx_disable_burst);
+EXPORT_SYMBOL(ppc4xx_set_burst_size);
===============================================================
--- linux-2.6.10/include/asm-ppc/ppc4xx_dma.h 2004-12-24
21:35:01.000000000 +0000
+++ linux-current/include/asm-ppc/ppc4xx_dma.h 2005-01-19
10:59:55.000000000 +0000
@@ -137,9 +137,10 @@ extern unsigned long DMA_MODE_WRITE, DMA
#define DMA_TCE_ENABLE (1<<(8-DMA_CR_OFFSET))
#define SET_DMA_TCE(x) (((x)&0x1)<<(8-DMA_CR_OFFSET))
-#define DMA_DEC (1<<(2) /* Address Decrement */
+#define DMA_DEC (1<<(2)) /* Address Decrement */
#define SET_DMA_DEC(x) (((x)&0x1)<<2)
#define GET_DMA_DEC(x) (((x)&DMA_DEC)>>2)
+
/*
* Transfer Modes
@@ -244,6 +245,14 @@ typedef uint32_t sgl_handle_t;
#define DMA_SG2 (1<<5)
#define DMA_SG3 (1<<4)
+/* DMA Channel Count Register */
+#define DMA_CTC_BTEN (1<<23) /* Burst Enable/Disable bit */
+#define DMA_CTC_BSIZ_MSK (3<<21) /* Mask of the Burst size bits */
+#define DMA_CTC_BSIZ_2 (0)
+#define DMA_CTC_BSIZ_4 (1<<21)
+#define DMA_CTC_BSIZ_8 (2<<21)
+#define DMA_CTC_BSIZ_16 (3<<21)
+
/*
* DMA SG Command Register
*/
@@ -482,6 +491,7 @@ typedef struct {
char td; /* transfer direction */
#endif
+ char int_on_final_sg;/* for scatter/gather - only interrupt on last sg */
} ppc_dma_ch_t;
/*
@@ -545,6 +555,9 @@ extern int ppc4xx_delete_dma_sgl_element
extern int ppc4xx_alloc_dma_handle(sgl_handle_t *, unsigned int,
unsigned int);
extern void ppc4xx_free_dma_handle(sgl_handle_t);
extern int ppc4xx_get_dma_status(void);
+extern int ppc4xx_enable_burst(unsigned int);
+extern int ppc4xx_disable_burst(unsigned int);
+extern int ppc4xx_set_burst_size(unsigned int, unsigned int);
extern void ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr);
extern void ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr);
extern void ppc4xx_enable_dma(unsigned int dmanr);
===============================================================
--- linux-2.6.10/arch/ppc/syslib/ppc4xx_sgdma.c 2004-12-24
21:35:18.000000000 +0000
+++ linux-current/arch/ppc/syslib/ppc4xx_sgdma.c 2005-01-19
15:07:47.000000000 +0000
@@ -120,6 +120,12 @@ ppc4xx_add_dma_sgl(sgl_handle_t handle,
psgl->ptail = psgl->phead;
psgl->ptail_dma = psgl->phead_dma;
} else {
+ if(p_dma_ch->int_on_final_sg) {
+ /* mask out all dma interrupts, except error, on tail
+ before adding new tail. */
+ psgl->ptail->control_count &=
+ ~(SG_TCI_ENABLE | SG_ETI_ENABLE);
+ }
psgl->ptail->next = psgl->ptail_dma + sizeof(ppc_sgl_t);
psgl->ptail++;
psgl->ptail_dma += sizeof(ppc_sgl_t);
@@ -160,7 +166,7 @@ ppc4xx_enable_dma_sgl(sgl_handle_t handl
p_dma_ch = &dma_channels[psgl->dmanr];
psgl->ptail->control_count &= ~SG_LINK; /* make this the last dscrptr */
sg_command = mfdcr(DCRN_ASGC);
-
+
ppc4xx_set_sg_addr(psgl->dmanr, psgl->phead_dma);
sg_command |= SSG_ENABLE(psgl->dmanr);
@@ -217,7 +223,7 @@ ppc4xx_get_dma_sgl_residue(sgl_handle_t
}
sgl_addr = (ppc_sgl_t *) __va(mfdcr(DCRN_ASG0 + (psgl->dmanr * 0x8)));
- count_left = mfdcr(DCRN_DMACT0 + (psgl->dmanr * 0x8));
+ count_left = mfdcr(DCRN_DMACT0 + (psgl->dmanr * 0x8)) & SG_COUNT_MASK;
if (!sgl_addr) {
printk("ppc4xx_get_dma_sgl_residue: sgl addr register is null\n");
@@ -351,10 +357,11 @@ ppc4xx_delete_dma_sgl_element(sgl_handle
int
ppc4xx_alloc_dma_handle(sgl_handle_t * phandle, unsigned int mode,
unsigned int dmanr)
{
- sgl_list_info_t *psgl;
+ sgl_list_info_t *psgl=NULL;
dma_addr_t dma_addr;
ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
uint32_t sg_command;
+ uint32_t ctc_settings;
void *ret;
if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
@@ -412,6 +419,11 @@ ppc4xx_alloc_dma_handle(sgl_handle_t * p
mtdcr(DCRN_ASGC, sg_command);
psgl->sgl_control = SG_ERI_ENABLE | SG_LINK;
+ /* keep control count register settings */
+ ctc_settings = mfdcr(DCRN_DMACT0 + (dmanr * 0x8))
+ & (DMA_CTC_BSIZ_MSK | DMA_CTC_BTEN); /*burst mode settings*/
+ psgl->sgl_control |= ctc_settings;
+
if (p_dma_ch->int_enable) {
if (p_dma_ch->tce_enable)
psgl->sgl_control |= SG_TCI_ENABLE;
===============================================================
[End]
More information about the Linuxppc-dev
mailing list