[PATCH 2.6 2/2] usb/input: Add Geyser 2 support to appletouch driver
Michael Hanselmann
linux-kernel at hansmi.ch
Wed Dec 14 09:40:19 EST 2005
This patch adds support for the Geyser 2 touchpads used on Post-Oct 2005
Apple PowerBooks to the appletouch driver.
Signed-off-by: Michael Hanselmann <linux-kernel at hansmi.ch>
Acked-by: Rene Nussbaumer <linux-kernel at killerfox.forkbomb.ch>
Acked-by: Johannes Berg <johannes at sipsolutions.net>
---
diff -Npur linux-2.6.15-rc5.orig/Documentation/input/appletouch.txt linux-2.6.15-rc5/Documentation/input/appletouch.txt
--- linux-2.6.15-rc5.orig/Documentation/input/appletouch.txt 2005-12-13 00:09:24.000000000 +0100
+++ linux-2.6.15-rc5/Documentation/input/appletouch.txt 2005-12-13 21:28:26.000000000 +0100
@@ -3,7 +3,7 @@ Apple Touchpad Driver (appletouch)
Copyright (C) 2005 Stelian Pop <stelian at popies.net>
appletouch is a Linux kernel driver for the USB touchpad found on post
-February 2005 Apple Alu Powerbooks.
+February 2005 and October 2005 Apple Aluminium Powerbooks.
This driver is derived from Johannes Berg's appletrackpad driver[1], but it has
been improved in some areas:
@@ -13,7 +13,8 @@ been improved in some areas:
Credits go to Johannes Berg for reverse-engineering the touchpad protocol,
Frank Arnold for further improvements, and Alex Harper for some additional
-information about the inner workings of the touchpad sensors.
+information about the inner workings of the touchpad sensors. Michael
+Hanselmann added support for the October 2005 models.
Usage:
------
diff -Npur linux-2.6.15-rc5.orig/drivers/usb/input/appletouch.c linux-2.6.15-rc5/drivers/usb/input/appletouch.c
--- linux-2.6.15-rc5.orig/drivers/usb/input/appletouch.c 2005-12-13 22:44:36.000000000 +0100
+++ linux-2.6.15-rc5/drivers/usb/input/appletouch.c 2005-12-13 22:55:19.000000000 +0100
@@ -17,6 +17,7 @@
* Nov/Dec 2005 - Michael Hanselmann
* o Compile relayfs support only if enabled in the kernel
* o Enable relayfs only if requested by the user
+ * o Added support for new October 2005 PowerBooks (Geyser 2)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -51,6 +52,11 @@
/* Apple has powerbooks which have the keyboard with different Product IDs */
#define APPLE_VENDOR_ID 0x05AC
+/* These names come from Info.plist in AppleUSBTrackpad.kext */
+#define GEYSER_ANSI_PRODUCT_ID 0x0214
+#define GEYSER_ISO_PRODUCT_ID 0x0215
+#define GEYSER_JIS_PRODUCT_ID 0x0216
+
#define ATP_DEVICE(prod) \
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
USB_DEVICE_ID_MATCH_INT_CLASS | \
@@ -66,7 +72,14 @@ static struct usb_device_id atp_table []
{ ATP_DEVICE(0x020F) },
{ ATP_DEVICE(0x030A) },
{ ATP_DEVICE(0x030B) },
- { } /* Terminating entry */
+
+ /* PowerBooks Oct 2005 */
+ { ATP_DEVICE(GEYSER_ANSI_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER_ISO_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER_JIS_PRODUCT_ID) },
+
+ /* Terminating entry */
+ { }
};
MODULE_DEVICE_TABLE (usb, atp_table);
@@ -75,9 +88,6 @@ struct rchan* rch = NULL;
struct rchan_callbacks* rcb = NULL;
#endif
-/* size of a USB urb transfer */
-#define ATP_DATASIZE 81
-
/*
* number of sensors. Note that only 16 instead of 26 X (horizontal)
* sensors exist on 12" and 15" PowerBooks. All models have 16 Y
@@ -127,6 +137,8 @@ struct atp {
signed char xy_old[ATP_XSENSORS + ATP_YSENSORS];
/* accumulated sensors */
int xy_acc[ATP_XSENSORS + ATP_YSENSORS];
+ int overflowwarn; /* overflow warning printed? */
+ int datalen; /* size of an USB urb transfer */
};
#define dbg_dump(msg, tab) \
@@ -157,6 +169,16 @@ module_param(relayfs, int, 0644);
MODULE_PARM_DESC(relayfs, "Activate relayfs support");
#endif
+/* Checks if the device a Geyser 2 (ANSI, ISO, JIS) */
+static inline int atp_is_geyser_2(struct atp *dev)
+{
+ int16_t productId = le16_to_cpu(dev->udev->descriptor.idProduct);
+
+ return (productId == GEYSER_ANSI_PRODUCT_ID) ||
+ (productId == GEYSER_ISO_PRODUCT_ID) ||
+ (productId == GEYSER_JIS_PRODUCT_ID);
+}
+
static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
int *z, int *fingers)
{
@@ -200,6 +222,13 @@ static void atp_complete(struct urb* urb
case 0:
/* success */
break;
+ case -EOVERFLOW:
+ if(!dev->overflowwarn) {
+ printk("appletouch: OVERFLOW with data "
+ "length %d, actual length is %d\n",
+ dev->datalen, dev->urb->actual_length);
+ dev->overflowwarn = 1;
+ }
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
@@ -214,7 +243,7 @@ static void atp_complete(struct urb* urb
}
/* drop incomplete datasets */
- if (dev->urb->actual_length != ATP_DATASIZE) {
+ if (dev->urb->actual_length != dev->datalen) {
dprintk("appletouch: incomplete data package.\n");
goto exit;
}
@@ -227,17 +256,72 @@ static void atp_complete(struct urb* urb
#endif
/* reorder the sensors values */
- for (i = 0; i < 8; i++) {
- /* X values */
- dev->xy_cur[i ] = dev->data[5 * i + 2];
- dev->xy_cur[i + 8] = dev->data[5 * i + 4];
- dev->xy_cur[i + 16] = dev->data[5 * i + 42];
- if (i < 2)
- dev->xy_cur[i + 24] = dev->data[5 * i + 44];
-
- /* Y values */
- dev->xy_cur[i + 26] = dev->data[5 * i + 1];
- dev->xy_cur[i + 34] = dev->data[5 * i + 3];
+ if (atp_is_geyser_2(dev)) {
+ memset(dev->xy_cur, 0, sizeof(dev->xy_cur));
+
+ /*
+ * The values are laid out like this:
+ * Y1, Y2, -, Y3, Y4, -, ...
+ * '-' is an unused value.
+ *
+ * The logic in a loop:
+ * for (i = 0, j = 19; i < 20; i += 2, j += 3) {
+ * dev->xy_cur[i] = dev->data[j];
+ * dev->xy_cur[i + 1] = dev->data[j + 1];
+ * }
+ *
+ * This code is called about 100 times per second because it is
+ * called for each interrupt transfer from the touchpad.
+ * Therefore it should be as fast as possible. Writing the
+ * following code in a loop would take about twice the time to
+ * run if not more.
+ */
+
+ /* read X values */
+ dev->xy_cur[0] = dev->data[19];
+ dev->xy_cur[1] = dev->data[20];
+ dev->xy_cur[2] = dev->data[22];
+ dev->xy_cur[3] = dev->data[23];
+ dev->xy_cur[4] = dev->data[25];
+ dev->xy_cur[5] = dev->data[26];
+ dev->xy_cur[6] = dev->data[28];
+ dev->xy_cur[7] = dev->data[29];
+ dev->xy_cur[8] = dev->data[31];
+ dev->xy_cur[9] = dev->data[32];
+ dev->xy_cur[10] = dev->data[34];
+ dev->xy_cur[11] = dev->data[35];
+ dev->xy_cur[12] = dev->data[37];
+ dev->xy_cur[13] = dev->data[38];
+ dev->xy_cur[14] = dev->data[40];
+ dev->xy_cur[15] = dev->data[41];
+ dev->xy_cur[16] = dev->data[43];
+ dev->xy_cur[17] = dev->data[44];
+ dev->xy_cur[18] = dev->data[46];
+ dev->xy_cur[19] = dev->data[47];
+
+ /* read Y values */
+ dev->xy_cur[ATP_XSENSORS + 0] = dev->data[1];
+ dev->xy_cur[ATP_XSENSORS + 1] = dev->data[2];
+ dev->xy_cur[ATP_XSENSORS + 2] = dev->data[4];
+ dev->xy_cur[ATP_XSENSORS + 3] = dev->data[5];
+ dev->xy_cur[ATP_XSENSORS + 4] = dev->data[7];
+ dev->xy_cur[ATP_XSENSORS + 5] = dev->data[8];
+ dev->xy_cur[ATP_XSENSORS + 6] = dev->data[10];
+ dev->xy_cur[ATP_XSENSORS + 7] = dev->data[11];
+ dev->xy_cur[ATP_XSENSORS + 8] = dev->data[13];
+ } else {
+ for (i = 0; i < 8; i++) {
+ /* X values */
+ dev->xy_cur[i ] = dev->data[5 * i + 2];
+ dev->xy_cur[i + 8] = dev->data[5 * i + 4];
+ dev->xy_cur[i + 16] = dev->data[5 * i + 42];
+ if (i < 2)
+ dev->xy_cur[i + 24] = dev->data[5 * i + 44];
+
+ /* Y values */
+ dev->xy_cur[i + 26] = dev->data[5 * i + 1];
+ dev->xy_cur[i + 34] = dev->data[5 * i + 3];
+ }
}
dbg_dump("sample", dev->xy_cur);
@@ -248,16 +332,24 @@ static void atp_complete(struct urb* urb
dev->x_old = dev->y_old = -1;
memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
- /* 17" Powerbooks have 10 extra X sensors */
- for (i = 16; i < ATP_XSENSORS; i++)
- if (dev->xy_cur[i]) {
- printk("appletouch: 17\" model detected.\n");
+ /* 17" Powerbooks have extra X sensors */
+ for (i = (atp_is_geyser_2(dev)?15:16); i < ATP_XSENSORS; i++) {
+ if (!dev->xy_cur[i]) continue;
+
+ printk("appletouch: 17\" model detected.\n");
+ if(atp_is_geyser_2(dev))
+ input_set_abs_params(dev->input, ABS_X, 0,
+ (20 - 1) *
+ ATP_XFACT - 1,
+ ATP_FUZZ, 0);
+ else
input_set_abs_params(dev->input, ABS_X, 0,
(ATP_XSENSORS - 1) *
ATP_XFACT - 1,
ATP_FUZZ, 0);
- break;
- }
+
+ break;
+ }
goto exit;
}
@@ -314,7 +406,8 @@ static void atp_complete(struct urb* urb
memset(dev->xy_acc, 0, sizeof(dev->xy_acc));
}
- input_report_key(dev->input, BTN_LEFT, !!dev->data[80]);
+ input_report_key(dev->input, BTN_LEFT,
+ !!dev->data[dev->datalen - 1]);
input_sync(dev->input);
@@ -355,7 +448,6 @@ static int atp_probe(struct usb_interfac
int int_in_endpointAddr = 0;
int i, retval = -ENOMEM;
-
/* set up the endpoint information */
/* use only the first interrupt-in endpoint */
iface_desc = iface->cur_altsetting;
@@ -385,6 +477,8 @@ static int atp_probe(struct usb_interfac
dev->udev = udev;
dev->input = input_dev;
+ dev->overflowwarn = 0;
+ dev->datalen = (atp_is_geyser_2(dev)?64:81);
dev->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->urb) {
@@ -392,7 +486,7 @@ static int atp_probe(struct usb_interfac
goto err_free_devs;
}
- dev->data = usb_buffer_alloc(dev->udev, ATP_DATASIZE, GFP_KERNEL,
+ dev->data = usb_buffer_alloc(dev->udev, dev->datalen, GFP_KERNEL,
&dev->urb->transfer_dma);
if (!dev->data) {
retval = -ENOMEM;
@@ -401,7 +495,7 @@ static int atp_probe(struct usb_interfac
usb_fill_int_urb(dev->urb, udev,
usb_rcvintpipe(udev, int_in_endpointAddr),
- dev->data, ATP_DATASIZE, atp_complete, dev, 1);
+ dev->data, dev->datalen, atp_complete, dev, 1);
usb_make_path(udev, dev->phys, sizeof(dev->phys));
strlcat(dev->phys, "/input0", sizeof(dev->phys));
@@ -417,14 +511,25 @@ static int atp_probe(struct usb_interfac
set_bit(EV_ABS, input_dev->evbit);
- /*
- * 12" and 15" Powerbooks only have 16 x sensors,
- * 17" models are detected later.
- */
- input_set_abs_params(input_dev, ABS_X, 0,
- (16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0);
- input_set_abs_params(input_dev, ABS_Y, 0,
- (ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0);
+ if (atp_is_geyser_2(dev)) {
+ /*
+ * Oct 2005 15" PowerBooks have 15 X sensors, 17" are detected
+ * later.
+ */
+ input_set_abs_params(input_dev, ABS_X, 0,
+ ((15 - 1) * ATP_XFACT) - 1, ATP_FUZZ, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0,
+ ((9 - 1) * ATP_YFACT) - 1, ATP_FUZZ, 0);
+ } else {
+ /*
+ * 12" and 15" Powerbooks only have 16 x sensors,
+ * 17" models are detected later.
+ */
+ input_set_abs_params(input_dev, ABS_X, 0,
+ (16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0,
+ (ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0);
+ }
input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0);
set_bit(EV_KEY, input_dev->evbit);
@@ -459,7 +564,7 @@ static void atp_disconnect(struct usb_in
usb_kill_urb(dev->urb);
input_unregister_device(dev->input);
usb_free_urb(dev->urb);
- usb_buffer_free(dev->udev, ATP_DATASIZE,
+ usb_buffer_free(dev->udev, dev->datalen,
dev->data, dev->urb->transfer_dma);
kfree(dev);
}
More information about the Linuxppc-dev
mailing list