Time precision, adjtime(x) vs. gettimeofday

[Bill Fink]

On Fri, 10 Oct 2003, Gabriel Paubert wrote:

> On Fri, Oct 10, 2003 at 01:12:54AM -0400, Bill Fink wrote:
> >
> > This discussion prompted me to finally ask about another clock related
> > problem I see on the 867 MHz G4 systems at work.  The clocks on these
> > systems continuously run 0.2% slow (about 3 minutes per day).  Apparently
> > this is more than ntp can adjust for (using scaling), as I get many of
> > these error messages in the log:
>
> Indeed, the limit of NTP is about 500ppm (0.05%) AFAIR. Anything higher
> and you go into period time steps like the one you report.
>
> 2.4.20 is recent enough and should not have this kind of problems.
>
> What is the initial decrementer frequency from boot messages log?

clifford% dmesg | grep -i decr
time_init: decrementer frequency = 33.290001 MHz

> What is the timebase frequency from OF?
> (od -td4 /proc/device-tree/cpus/PowerPC,G4/timebase-frequency)

clifford% od -td4 /proc/device-tree/cpus/PowerPC,G4/timebase-frequency
0000000    33290001
0000004

						-Bill

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/