pcmcia- config.opts, cis and pci

['David Gibson']

On Thu, Aug 29, 2002 at 09:30:27AM +0530, Sanjeev Manral wrote:
>
> Thank you david,
>
> right now I 'm using 16 bit card. does it mean that enabling pci has no
> sigficant as there is no pci bus.

That should be true.

> you can have a look at hardware(visit link)
> http://www.sanyo.com/industrial/semiconductors/systemlsi/IAPr.html
>
> do I need to write a driver for sockets of my controller?

If there isn't a socket driver already available for your PCMCIA
controller hardware, then yes.

> From: David Gibson [mailto:david at gibson.dropbear.id.au]
> Sent: Thursday, August 29, 2002 5:21 AM
> To: 'linuxppc-dev at lists.linuxppc.org'
> Subject: Re: pcmcia- config.opts, cis and pci
>
>
>
> On Wed, Aug 28, 2002 at 03:30:14PM +0530, Sanjeev Manral wrote:
> >
> > Hi all,
> >
> > I'm using pcmcia-cs-3.2.0 my kernel is 2.4.17. It's a ppc405 board.
> >
> > pcmcia-cs is not able to detect ide_cs card and telling it a Blank card.
> >
> > I've tried many options in /etc/pcmcia/config.opts but nothing is working.
> >
> > I'm having one more doubt. there is no PCI brige in manual of my hardware.
> > It is using coreconnect architecture and PCMCIA controller is directly
> > connected to processor local bus. In hardware there is not a single
> mention
> > of pci-plb bridge.
> >
> > If I disable "pci" in "make xconfig" "card bus support" is also disabling
> > and there are no sockets.
> > shall I enable "pci" and "card bus support"( I'm trying this, IS IT
> > CORRECT?)
>
> Probably not - are you using a 16-bit PCMCIA "PC Card" or a 32-bit
> "CardBus" card.  Since you have no PCI, chances are your hardware will
> only support the 16-bit cards.
>
> > I debugged it with enable "pci" and "card bus support". driver is not able
> > to get a valid cis. and trying to load a blank card driver( memory_cs )
> > instead of ide_cs.
> >
> > Is it a problem with only config.opts or some other problem.
> >
> > I don't know where to proceed. if somebody knows how and where to get a
> > valid config.opts please let me know.
> >
> > thanks,
> > Sanjeev
> >
> >
> >
>

--
David Gibson			| For every complex problem there is a
david at gibson.dropbear.id.au	| solution which is simple, neat and
				| wrong.
http://www.ozlabs.org/people/dgibson

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/