benh 2.4.4-pre3, Titanium and AirPort

[Michel Dänzer]

Alain RICHARD wrote:

> I have built PCMCIA in the kernel, but the problem is that to load
> orinico_cs, we must first load the PCMCIA support because it depends
> on ds that depends on a working pcmcia adaptor driver (i82365 in
> previous powerbooks).
>
> The problem seems that i82365 seems not recognizing the cardbus on
> titanium. lspci output is :
>
> 01:1a.0 CardBus bridge: Texas Instruments PCI1211
>          Flags: bus master, medium devsel, latency 16, IRQ 58
>          Memory at 80080000 (32-bit, non-prefetchable) [size=4K]
>          Bus: primary=01, secondary=02, subordinate=05, sec-latency=32
>          I/O window 1: 00000000-00000003
>          16-bit legacy interface ports at 1011

I have the same on my Pismo and I use the yenta_socket module. I'm writing
this from an Airport connection. :)


--
Earthling Michel Dänzer (MrCooper)    \   Debian GNU/Linux (powerpc) developer
CS student, Free Software enthusiast   \        XFree86 and DRI project member

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/