G3/IDE/BootX/2.3.49 woes

Michael Thompson mickey at berkeley.innomedia.com
Thu Mar 16 18:16:39 EST 2000




I've got a B/W G3. I am able to boot 2.2.15 using bootX 1.2b3
without any problems.

However, with 2.3.49, the IDE controller doesn't seem to
be generating interrupts.

The controller (CMD646) is recognized, the drives are
identified.

I can see that irq 26 has been assigned to the device, and
this irq is enabled.

The controller's MRDMODE register (0x71) is initialized to
0x00, so it should be generating interrupts.

However, no interrupts are received from the device.

Could this be an interrupt routing issue?




Can someone let me know how I can boot linux on a G3
using OpenFirmware instead of bootX? Maybe I will
have better luck with OFW.o

Thanks very much!

-Michael Thompson
mickey at berkeley.innomedia.com

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/





More information about the Linuxppc-dev mailing list