MPC860 patches for glibc

[Jesper Skov]

>>>>> "Graham" == Graham Stoney <greyham at research.canon.com.au> writes:

Graham> Brendan J Simon writes:
>> I didn't realise there were 860 patches for glibc.  Where can I get
>> these patches from ?

Graham> The magic mailing list archive, of course (-:

Graham> http://lists.linuxppc.org/listarcs/linuxppc-embedded/199909/msg00000.html

>> What do they do ?

Graham> Fix the cache line size for dynamic loading, and rearrange the
Graham> FPU stuff so it doesn't get included when you build.

I think the below patch for dl-machine.c would be better. It incurs no
loop overhead on the 32-byte cache line CPUs - and I think the double
flush of the same line should be harmless (and cheaper than the loop
overhead).

There is one small potential for error; if the macro is called with a
(32-byte aligned pointer)+16/17/18...31 in which case the first 16
bytes (of the 32-byte aligned address) would not be flushed on a 8xx,
while they would be on a bigger CPU. (did that make any sense at all ;)

Comments? Is it as safe/sensible as I think it is?

Thanks,
Jesper

--- powerpc/dl-machine.c~	Fri Mar  5 00:26:43 1999
+++ powerpc/dl-machine.c	Thu Jan  6 14:09:34 2000
@@ -63,10 +63,17 @@
 #define OPCODE_SLWI(ra,rs,sh) OPCODE_RLWINM(ra,rs,sh,0,31-sh)
 
 
-#define PPC_DCBST(where) asm ("dcbst 0,%0" : : "r"(where) : "memory")
+/* The macros dealing with cache lines affect both (where) and
+   (where+16).  This is in order to support the 8xx CPUs which have
+   16-byte cache lines.  On the CPUs with 32-byte cache lines this
+   should have no noticable effect as the first store instruction
+   would effectively make the second instruction a NOP (since the line
+   would no longer be dirty). */
+#define PPC_DCBST(where) asm ("dcbst 0,%0;dcbst 0,%1" : : "r"(where), "r"((unsigned long)(where)+16) : "memory")
+#define PPC_ICBI(where) asm ("icbi 0,%0;icbi 0,%1" : : "r"(where), "r"((unsigned long)(where)+16) : "memory")
+
 #define PPC_SYNC asm ("sync" : : : "memory")
 #define PPC_ISYNC asm volatile ("sync; isync" : : : "memory")
-#define PPC_ICBI(where) asm ("icbi 0,%0" : : "r"(where) : "memory")
 #define PPC_DIE asm volatile ("tweq 0,0")
 
 /* Use this when you've modified some code, but it won't be in the

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/