[patch net-next/mlxsw internal v2 08/15] mlxsw: reg: Add Policy-Engine Region Association Register

[Jiri Pirko]

From: Jiri Pirko <jiri at mellanox.com>

The PERAR register is used to associate a hw region for region_id's.

Signed-off-by: Jiri Pirko <jiri at mellanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 56 +++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 35e61e23872e..3bf6c6b721b9 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -39,6 +39,7 @@
 #ifndef _MLXSW_REG_H
 #define _MLXSW_REG_H
 
+#include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/bitops.h>
 #include <linux/if_vlan.h>
@@ -2481,6 +2482,60 @@ static inline void mlxsw_reg_ptce2_pack(char *payload, bool valid,
 	mlxsw_reg_ptce2_tcam_region_info_memcpy_to(payload, tcam_region_info);
 }
 
+/* PERAR - Policy-Engine Region Association Register
+ * -------------------------------------------------
+ * This register associates a hw region for region_id's. Changing on the fly
+ * is supported by the device.
+ */
+#define MLXSW_REG_PERAR_ID 0x3026
+#define MLXSW_REG_PERAR_LEN 0x08
+
+MLXSW_REG_DEFINE(perar, MLXSW_REG_PERAR_ID, MLXSW_REG_PERAR_LEN);
+
+/* reg_perar_inkbr
+ * Ignore Number of Key Blocks in the Region_id
+ * 0: ACCOUNT - allocate 1 or more hw_regions according to the
+ * number of key blocks used by the region_id. Must be used when
+ * remapping an active region_id
+ * 1: IGNORE - allocate no more than 1 hw_region for the
+ * region_id, regardless of the number of key blocks used by the
+ * region_id. Can be used for a non-active region_id
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, perar, inkbr, 0x00, 28, 1);
+
+/* reg_perar_region_id
+ * Region identifier
+ * Range 0 .. cap_max_regions-1
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, perar, region_id, 0x00, 0, 16);
+
+static inline unsigned int
+mlxsw_reg_perar_hw_regions_needed(unsigned int block_num)
+{
+	return DIV_ROUND_UP(block_num, 4);
+}
+
+/* reg_perar_hw_region
+ * HW Region
+ * Range 0 .. cap_max_regions-1
+ * Default: hw_region = region_id
+ * For a 8 key block region, 2 consecutive regions are used
+ * For a 12 key block region, 3 consecutive regions are used
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, perar, hw_region, 0x04, 0, 16);
+
+static inline void mlxsw_reg_perar_pack(char *payload, bool inkbr,
+					u16 region_id, u16 hw_region)
+{
+	MLXSW_REG_ZERO(perar, payload);
+	mlxsw_reg_perar_inkbr_set(payload, inkbr);
+	mlxsw_reg_perar_region_id_set(payload, region_id);
+	mlxsw_reg_perar_hw_region_set(payload, hw_region);
+}
+
 /* IEDR - Infrastructure Entry Delete Register
  * ----------------------------------------------------
  * This register is used for deleting entries from the entry tables.
@@ -7980,6 +8035,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
 	MLXSW_REG(prcr),
 	MLXSW_REG(pefa),
 	MLXSW_REG(ptce2),
+	MLXSW_REG(perar),
 	MLXSW_REG(iedr),
 	MLXSW_REG(qpcr),
 	MLXSW_REG(qtct),
-- 
2.14.4