[PATCH net-next 7/7] selftests: forwarding: Test changes in mirror-to-gretap

[Petr Machata]

These tests set up mirroring in a situation that the configuration is
incorrect, i.e. mirrored packets, if any, are not supposed to reach
destination tunnel device. Then the configuration is rectified and
mirroring is checked to have started working.

Signed-off-by: Petr Machata <petrm at mellanox.com>
Reviewed-by: Jiri Pirko <jiri at mellanox.com>
---
 .../selftests/net/forwarding/mirror_gre_changes.sh | 194 +++++++++++++++++++++
 1 file changed, 194 insertions(+)
 create mode 100755 tools/testing/selftests/net/forwarding/mirror_gre_changes.sh

diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_changes.sh b/tools/testing/selftests/net/forwarding/mirror_gre_changes.sh
new file mode 100755
index 0000000..0ed288a
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_changes.sh
@@ -0,0 +1,194 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test how mirrors to gretap and ip6gretap react to changes to relevant
+# configuration.
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	# This test downs $swp3, which deletes the configured IPv6 address
+	# unless this sysctl is set.
+	local key=net.ipv6.conf.$swp3.keep_addr_on_down
+	SWP3_KEEP_ADDR_ON_DOWN=$(sysctl -n $key)
+	sysctl -qw $key=1
+
+	ip address add dev $swp3 192.0.2.129/28
+	ip address add dev $h3 192.0.2.130/28
+
+	ip address add dev $swp3 2001:db8:2::1/64
+	ip address add dev $h3 2001:db8:2::2/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $swp3 2001:db8:2::1/64
+
+	ip address del dev $h3 192.0.2.130/28
+	ip address del dev $swp3 192.0.2.129/28
+
+	local key=net.ipv6.conf.$swp3.keep_addr_on_down
+	sysctl -qw $key=$SWP3_KEEP_ADDR_ON_DOWN
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_span_gre_ttl()
+{
+	local tundev=$1; shift
+	local type=$1; shift
+	local prot=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	tc qdisc add dev $h3 clsact
+	tc filter add dev $h3 ingress pref 77 prot $prot \
+		flower ip_ttl 50 action pass
+
+	mirror_test v$h1 192.0.2.1 192.0.2.2 $h3 77 0
+
+	ip link set dev $tundev type $type ttl 50
+	mirror_test v$h1 192.0.2.1 192.0.2.2 $h3 77 10
+
+	ip link set dev $tundev type $type ttl 100
+	tc filter del dev $h3 ingress pref 77
+	tc qdisc del dev $h3 clsact
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: TTL change ($tcflags)"
+}
+
+test_span_gre_tun_up()
+{
+	local tundev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip link set dev $tundev down
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+
+	ip link set dev $tundev up
+
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: tunnel down/up ($tcflags)"
+}
+
+test_span_gre_egress_up()
+{
+	local tundev=$1; shift
+	local remote_ip=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip link set dev $swp3 down
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+
+	# After setting the device up, wait for neighbor to get resolved so that
+	# we can expect mirroring to work.
+	ip link set dev $swp3 up
+	while true; do
+		ip neigh sh dev $swp3 $remote_ip nud reachable |
+		    grep -q ^
+		if [[ $? -ne 0 ]]; then
+			sleep 1
+		else
+			break
+		fi
+	done
+
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: egress down/up ($tcflags)"
+}
+
+test_span_gre_remote_ip()
+{
+	local tundev=$1; shift
+	local type=$1; shift
+	local correct_ip=$1; shift
+	local wrong_ip=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip link set dev $tundev type $type remote $wrong_ip
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+
+	ip link set dev $tundev type $type remote $correct_ip
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: remote address change ($tcflags)"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	test_span_gre_ttl gt4 gretap ip "mirror to gretap"
+	test_span_gre_ttl gt6 ip6gretap ipv6 "mirror to ip6gretap"
+
+	test_span_gre_tun_up gt4 "mirror to gretap"
+	test_span_gre_tun_up gt6 "mirror to ip6gretap"
+
+	test_span_gre_egress_up gt4 192.0.2.130 "mirror to gretap"
+	test_span_gre_egress_up gt6 2001:db8:2::2 "mirror to ip6gretap"
+
+	test_span_gre_remote_ip gt4 gretap 192.0.2.130 192.0.2.132 "mirror to gretap"
+	test_span_gre_remote_ip gt6 ip6gretap 2001:db8:2::2 2001:db8:2::4 "mirror to ip6gretap"
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
-- 
2.4.11