[PATCH v5 1/9] dt-bindings: fsi: fsi2spi: Document SPI controller child nodes

[Rob Herring (Arm)]

On Tue, 14 May 2024 14:54:27 -0500, Eddie James wrote:
> The FSI2SPI bridge has several SPI controllers behind it, which
> should be documented. Also, therefore the node needs to specify
> address and size cells.
> 
> Signed-off-by: Eddie James <eajames at linux.ibm.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> ---
> Depends on https://lore.kernel.org/all/20240514192630.152747-1-eajames@linux.ibm.com/
> 
>  .../devicetree/bindings/fsi/ibm,fsi2spi.yaml  | 36 ++++++++++++++++---
>  1 file changed, 32 insertions(+), 4 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml:
Error in referenced schema matching $id: http://devicetree.org/schemas/spi/ibm,spi-fsi.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.example.dtb: fsi2spi at 1c00: spi at 0: False schema does not allow {'compatible': ['ibm,spi-fsi'], 'reg': [[0]], '#address-cells': [[1]], '#size-cells': [[0]], 'eeprom at 0': {'compatible': ['atmel,at25'], 'reg': [[0]], 'address-width': [[24]], 'pagesize': [[256]], 'size': [[524288]], 'spi-max-frequency': [[1000000]]}}
	from schema $id: http://devicetree.org/schemas/fsi/ibm,fsi2spi.yaml#
Documentation/devicetree/bindings/fsi/ibm,fsi2spi.example.dtb: /example-0/fsi2spi at 1c00/spi at 0: failed to match any schema with compatible: ['ibm,spi-fsi']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240514195435.155372-2-eajames@linux.ibm.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.