[PATCH v4 22/40] fsi: aspeed: Use common master error handler
Eddie James
eajames at linux.ibm.com
Thu Jun 6 07:22:54 AEST 2024
This will do the correct mmode manipulation to do the master
reset.
Signed-off-by: Eddie James <eajames at linux.ibm.com>
---
drivers/fsi/fsi-master-aspeed.c | 27 ++++-----------------------
1 file changed, 4 insertions(+), 23 deletions(-)
diff --git a/drivers/fsi/fsi-master-aspeed.c b/drivers/fsi/fsi-master-aspeed.c
index c9f6d84e1a372..eecd64bc29512 100644
--- a/drivers/fsi/fsi-master-aspeed.c
+++ b/drivers/fsi/fsi-master-aspeed.c
@@ -226,27 +226,6 @@ static int opb_readb(struct fsi_master_aspeed *aspeed, uint32_t addr, u8 *out)
return __opb_read(aspeed, addr, XFER_BYTE, (void *)out);
}
-static int check_errors(struct fsi_master_aspeed *aspeed, int err)
-{
- int ret;
-
- if (err == -EIO) {
- /* Check MAEB (0x70) ? */
-
- /* Then clear errors in master */
- ret = opb_writel(aspeed, ctrl_base + FSI_MRESP0,
- cpu_to_be32(FSI_MRESP_RST_ALL_MASTER));
- if (ret) {
- /* TODO: log? return different code? */
- return ret;
- }
- /* TODO: confirm that 0x70 was okay */
- }
-
- /* This will pass through timeout errors */
- return err;
-}
-
static int aspeed_master_read(struct fsi_master *master, int link,
uint8_t id, uint32_t addr, void *val, size_t size)
{
@@ -277,7 +256,8 @@ static int aspeed_master_read(struct fsi_master *master, int link,
goto done;
}
- ret = check_errors(aspeed, ret);
+ if (ret == -EIO)
+ fsi_master_error(&aspeed->master, link);
done:
spin_unlock_irqrestore(&aspeed->lock, flags);
return ret;
@@ -313,7 +293,8 @@ static int aspeed_master_write(struct fsi_master *master, int link,
goto done;
}
- ret = check_errors(aspeed, ret);
+ if (ret == -EIO)
+ fsi_master_error(&aspeed->master, link);
done:
spin_unlock_irqrestore(&aspeed->lock, flags);
return ret;
--
2.39.3
More information about the linux-fsi
mailing list