[PATCH 26/33] ARM: dts: aspeed: FSI interrupt support

[Eddie James]

Enable FSI interrupt controllers for AST2600 and P10BMC hub master.

Signed-off-by: Eddie James <eajames at linux.ibm.com>
---
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi        | 4 ++++
 arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi | 2 ++
 2 files changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index c4d1faade8be..e0b44498269f 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -865,22 +865,26 @@ i2c: bus at 1e78a000 {
 			};
 
 			fsim0: fsi at 1e79b000 {
+				#interrupt-cells = <1>;
 				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
 				reg = <0x1e79b000 0x94>;
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_fsi1_default>;
 				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				interrupt-controller;
 				status = "disabled";
 			};
 
 			fsim1: fsi at 1e79b100 {
+				#interrupt-cells = <1>;
 				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
 				reg = <0x1e79b100 0x94>;
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_fsi2_default>;
 				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				interrupt-controller;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
index a93a241d005a..44e48e39e6e9 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
@@ -166,10 +166,12 @@ occ-hwmon {
 		};
 
 		fsi_hub0: hub at 3400 {
+			#interrupt-cells = <1>;
 			compatible = "fsi-master-hub";
 			reg = <0x3400 0x400>;
 			#address-cells = <2>;
 			#size-cells = <0>;
+			interrupt-controller;
 		};
 	};
 };
-- 
2.39.3