[PATCH v2 25/31] i2c: fsi: Calculate clock divider from local bus frequency

[Eddie James]

On 4/15/24 17:11, Andi Shyti wrote:
> Hi Eddie,
>
>> @@ -689,6 +692,20 @@ static int fsi_i2c_probe(struct device *dev)
>>   	mutex_init(&i2c->lock);
>>   	i2c->fsi = to_fsi_dev(dev);
>>   	INIT_LIST_HEAD(&i2c->ports);
>> +	i2c->clock_div = I2C_DEFAULT_CLK_DIV;
>> +
>> +	lbus = fsi_device_local_bus_frequency(i2c->fsi);
>> +	if (lbus) {
>> +		u32 clock = I2C_DEFAULT_CLK_RATE;
> I don't see the need for initialization.


Does device_property_read_u32 set clock if the property isn't found? If 
not, it needs to be initialized here. Or I can set it in an else 
statement from device_property_read_u32.


>
>> +
>> +		if (!device_property_read_u32(dev, "clock-frequency", &clock)) {
>> +			if (!clock)
>> +				clock = I2C_DEFAULT_CLK_RATE;
>> +		}
> no need for brackets.


Perhaps not, but checkpatch didn't complain, and I personally like 
brackets if multiple lines are included.


>
>> +
>> +		// i2c clock rate = local bus clock / (4 * (i2c clock div + 1))
> You forgot to remove this.


I actually meant to leave that comment to explain how the clock rate is 
calculated, as the reverse calculation in the code is a little more 
confusing.


>
> Andi
>
>> +		i2c->clock_div = (((lbus + (clock - 1)) / clock) / 4) - 1;
>> +	}
>>   
>>   	rc = fsi_i2c_dev_init(i2c);
>>   	if (rc)
>> -- 
>> 2.39.3
>>