[PATCH 1/2] dt-bindings: fsi: Document the IBM I2C Responder virtual FSI master

[Rob Herring]

On Thu, 19 Jan 2023 11:47:13 -0600, Eddie James wrote:
> The I2C Responder translates I2C commands to CFAM or SCOM operations,
> effectively implementing an FSI master.
> 
> Signed-off-by: Eddie James <eajames at linux.ibm.com>
> ---
>  .../devicetree/bindings/fsi/ibm,i2cr.yaml     | 42 +++++++++++++++++++
>  1 file changed, 42 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fsi/ibm,i2cr.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/fsi/ibm,i2cr.yaml:23:4: [error] syntax error: expected <block end>, but found '<block mapping start>' (syntax)
./Documentation/devicetree/bindings/fsi/ibm,i2cr.yaml:24:5: [warning] wrong indentation: expected 5 but found 4 (indentation)
./Documentation/devicetree/bindings/fsi/ibm,i2cr.yaml:33:2: [warning] wrong indentation: expected 2 but found 1 (indentation)

dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/fsi/ibm,i2cr.example.dts'
Documentation/devicetree/bindings/fsi/ibm,i2cr.yaml:23:4: did not find expected key
make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/fsi/ibm,i2cr.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/fsi/ibm,i2cr.yaml:23:4: did not find expected key
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/fsi/ibm,i2cr.yaml: ignoring, error parsing file
make: *** [Makefile:1508: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230119174714.1486042-2-eajames@linux.ibm.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.