[PATCH 1/3] dt-bindings: hwmon: Add IBM OCC bindings

[Eddie James]

These bindings describe the POWER processor On Chip Controller accessed
from a service processor or baseboard management controller (BMC).

Signed-off-by: Eddie James <eajames at linux.ibm.com>
---
 .../bindings/hwmon/ibm,occ-hmwon.yaml         | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/ibm,occ-hmwon.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/ibm,occ-hmwon.yaml b/Documentation/devicetree/bindings/hwmon/ibm,occ-hmwon.yaml
new file mode 100644
index 000000000000..8f8c3b8d7129
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ibm,occ-hmwon.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ibm,occ-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM On-Chip Controller (OCC) accessed from a service processor
+
+maintainers:
+  - Eddie James <eajames at linux.ibm.com>
+
+description: |
+  This binding describes a POWER processor On-Chip Controller (OCC)
+  accessed from a service processor or baseboard management controller
+  (BMC).
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-occ-hwmon
+      - ibm,p10-occ-hwmon
+
+  ibm,inactive-on-init:
+    description: This property describes whether or not the OCC should
+      be marked as active during device initialization. The alternative
+      is for user space to mark the device active based on higher level
+      communications between the BMC and the host processor.
+    type: boolean
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    occ-hmwon {
+        compatible = "ibm,p9-occ-hwmon";
+        ibm,inactive-on-init;
+    };
-- 
2.31.1