[PATCH 1/3] dt-bindings: fsi: Add description of FSI master

[Joel Stanley]

This describes the FSI master present in the AST2600.

Signed-off-by: Joel Stanley <joel at jms.id.au>
---
 .../bindings/fsi/fsi-master-aspeed.txt        | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt

diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
new file mode 100644
index 000000000000..c804897fa936
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
@@ -0,0 +1,24 @@
+Device-tree bindings for AST2600 FSI master
+-------------------------------------------
+
+The AST2600 contains two identical FSI masters. They share a clock and have a
+separate interrupt line and output pins.
+
+Required properties:
+ - compatible: "aspeed,ast2600-fsi-master"
+ - reg: base address and length
+ - clocks: phandle and clock number
+ - interrupts: platform dependant interrupt description
+ - pinctrl-0: phandle to pinctrl node
+ - pinctrl-names: pinctrl state
+
+Examples:
+
+    fsi-master {
+        compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+        reg = <0x1e79b000 0x94>;
+	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fsi1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+    };
-- 
2.24.0.rc1