[PATCH] ARM: dts: aspeed: yosemite5: Add MP5998 power monitor

[Andrew Jeffery]

Hi Daniel,

On Thu, 2026-03-05 at 16:46 +0800, Daniel Hsu wrote:
> Add the MP5998 power monitor device on I2C bus with address 0x46
> for the Yosemite5 platform.

I would rather you describe the purpose of the power monitoring. Why is
this instance of an MP5998 necessary in the system design? The address
of the sensor is evident from the details in the patch and isn't
necessary to describe here.

> 
> This allows the hwmon driver to probe the device and expose the
> power monitoring telemetry to userspace.

I would prefer you reword or remove this sentence. The purpose of the
devicetree is to describe the hardware. What the firmware/kernel
chooses to do with that information is a separate problem.

Andrew

> 
> Signed-off-by: Daniel Hsu <Daniel-Hsu at quantatw.com>
> ---
>  arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-
> yosemite5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-
> yosemite5.dts
> index 2486981f3d6b..6287f80d70d9 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
> @@ -422,6 +422,11 @@ power-sensor at 45 {
>  		shunt-resistor = <1000>;
>  	};
>  
> +	power-monitor at 46 {
> +		compatible = "mps,mp5998";
> +		reg = <0x46>;
> +	};
> +
>  	power-monitor at 47 {
>  		compatible = "ti,tps25990";
>  		reg = <0x47>;