[PATCH 1/2] dt-bindings: mmc: sdhci-of-aspeed : Add ast2700 support

[Krzysztof Kozlowski]

On Fri, Mar 13, 2026 at 01:27:56PM +0800, Ryan Chen wrote:
> Add the "aspeed,ast2700-sd-controller" compatible. The ast2700 sdhci
> controller requires an reset, so make the "resets" property mandatory
> for this compatible to reflect the hardware requirement.

Subject - there is never space before ':'

> 
> Signed-off-by: Ryan Chen <ryan_chen at aspeedtech.com>
> ---
>  Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> index d24950ccea95..a2ff9a94db13 100644
> --- a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> @@ -26,6 +26,7 @@ properties:
>        - aspeed,ast2400-sd-controller
>        - aspeed,ast2500-sd-controller
>        - aspeed,ast2600-sd-controller
> +      - aspeed,ast2700-sd-controller

Missing blank lines everywhere in your patchset.

>    reg:
>      maxItems: 1
>      description: Common configuration registers
> @@ -37,6 +38,20 @@ properties:
>    clocks:
>      maxItems: 1
>      description: The SD/SDIO controller clock gate

Blank line

> +  resets:
> +    maxItems: 1

Blank line, just open any other bindings. If this is because you used
LLM, then obviously NAK, because we should not waste time to review
unsupervised poor quality LLM output. It is your task to review it, not
ours.