[PATCH v4 5/7] ARM: dts: aspeed: yosemite5: Correct power monitor shunt resistor

[Kevin Tung]

The shunt resistor value defined in the DTS was incorrect and did not
reflect the resistor value populated on the board. As a result, power
and current readings derived from this value were inaccurate.

This change updates the DTS to use the correct shunt resistor value
according to the hardware design, restoring accurate power and current
measurements.

Signed-off-by: Kevin Tung <kevin.tung.openbmc at gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
index 84d3731b17f7c7c87338672bbcc859de2b89b722..524597a81365ef10cd03b67d35eeb88a965cbe0a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
@@ -415,7 +415,7 @@ power-sensor at 42 {
 	power-monitor at 43 {
 		compatible = "lltc,ltc4287";
 		reg = <0x43>;
-		shunt-resistor-micro-ohms = <250>;
+		shunt-resistor-micro-ohms = <100>;
 	};
 
 	power-sensor at 44 {
@@ -461,25 +461,25 @@ eeprom at 57 {
 	power-monitor at 58 {
 		compatible = "renesas,isl28022";
 		reg = <0x58>;
-		shunt-resistor-micro-ohms = <1000>;
+		shunt-resistor-micro-ohms = <10000>;
 	};
 
 	power-monitor at 59 {
 		compatible = "renesas,isl28022";
 		reg = <0x59>;
-		shunt-resistor-micro-ohms = <1000>;
+		shunt-resistor-micro-ohms = <10000>;
 	};
 
 	power-monitor at 5a {
 		compatible = "renesas,isl28022";
 		reg = <0x5a>;
-		shunt-resistor-micro-ohms = <1000>;
+		shunt-resistor-micro-ohms = <10000>;
 	};
 
 	power-monitor at 5b {
 		compatible = "renesas,isl28022";
 		reg = <0x5b>;
-		shunt-resistor-micro-ohms = <1000>;
+		shunt-resistor-micro-ohms = <10000>;
 	};
 
 	psu at 5c {
@@ -723,13 +723,13 @@ gpio-expander at 21 {
 	power-sensor at 40 {
 		compatible = "ti,ina230";
 		reg = <0x40>;
-		shunt-resistor = <2000>;
+		shunt-resistor = <1000>;
 	};
 
 	power-sensor at 41 {
 		compatible = "ti,ina230";
 		reg = <0x41>;
-		shunt-resistor = <2000>;
+		shunt-resistor = <1000>;
 	};
 
 	power-sensor at 42 {

-- 
2.52.0