[PATCH] gpio: aspeed: fix AST2700 debounce selector bit definitions

[Bartosz Golaszewski]

On Wed, 15 Apr 2026 18:24:42 +0800, Billy Tsai wrote:
> The AST2700 datasheet defines reg_debounce_sel1 as the low bit and
> reg_debounce_sel2 as the high bit. The current driver uses the AST2600
> mapping instead, where sel1 is the high bit and sel2 is the low bit.
> 
> As a result, the debounce selector bits are programmed in reverse on
> AST2700. Swap the G7 sel1/sel2 bit definitions so the driver matches the
> hardware definition.
> 
> [...]

Applied, thanks!

[1/1] gpio: aspeed: fix AST2700 debounce selector bit definitions
      https://git.kernel.org/brgl/c/e31eee4a961077d60ef2362507240c6743c1c2ae

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski at oss.qualcomm.com>