[PATCH v5 2/3] dt-bindings: mfd: aspeed,ast2x00-scu: Describe AST2700 SCU0

[Krzysztof Kozlowski]

On Tue, Mar 31, 2026 at 03:31:17PM +0800, Billy Tsai wrote:
> AST2700 consists of two interconnected SoC instances, each with its own
> System Control Unit (SCU). The SCU0 provides pin control, interrupt
> controllers, clocks, resets, and address-space mappings for the
> Secondary and Tertiary Service Processors (SSP and TSP).
> 
> Describe the SSP/TSP address mappings using the standard
> memory-region and memory-region-names properties.
> 
> Disallow legacy child nodes that are not present on AST2700, including
> p2a-control and smp-memram. The latter is unnecessary as software can
> access the scratch registers via the SCU syscon.
> 
> Also allow the AST2700 SoC0 pin controller to be described as a child
> node of the SCU0, and add an example illustrating the SCU0 layout,
> including reserved-memory, interrupt controllers, and pinctrl.
> 
> Signed-off-by: Billy Tsai <billy_tsai at aspeedtech.com>
> ---
>  .../bindings/mfd/aspeed,ast2x00-scu.yaml           | 117 +++++++++++++++++++++
>  1 file changed, 117 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
> index a87f31fce019..86d51389689c 100644
> --- a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
> +++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
> @@ -46,6 +46,9 @@ properties:
>    '#reset-cells':
>      const: 1
>  
> +  memory-region: true
> +  memory-region-names: true

Missing constraints. From where did you take such syntax (so I can fix
it)?

Best regards,
Krzysztof