[PATCH v2] ARM: dts: aspeed: Enable networking for Asus Kommando IPMI Card

[Andrew Lunn]

On Tue, Mar 31, 2026 at 09:18:00AM -0500, Anirudh Srinivasan wrote:
> Adds the DT nodes needed for ethernet support for Asus Kommando, with
> phy mode set to rgmii-id.
> 
> When this DT was originally added, the phy mode was set to rgmii (which
> was incorrect). It was suggested to remove networking support from the
> DT till the Aspeed networking driver was patched so that the correct phy
> mode could be used.
> 
> The discussion in [1] mentions that u-boot was inserting clk delays that
> weren't needed, which resulted in needing to set the phy mode in linux
> to rgmii incorrectly. The solution suggested there was to patch u-boot to
> no longer insert these clk delays and use rgmii-id as the phy mode for
> any future DTs added to linux.
> 
> This DT was tested (on the OpenBMC u-boot fork [2]) with a u-boot DT
> modified to insert clk delays of 0 (instead of patching u-boot itself).
> [3] adds a u-boot DT for this device (without networking) and describes
> how to patch it to add networking support. If this patched DT is used,
> then networking works with rgmii-id phy mode in both u-boot and linux.
> 
> [1] https://lore.kernel.org/linux-aspeed/ef88bb50-9f2c-458d-a7e5-dc5ecb9c777a@lunn.ch/
> [2] https://github.com/openbmc/u-boot/tree/v2019.04-aspeed-openbmc
> [3] https://lore.kernel.org/openbmc/20260328-asus-kommando-v2-1-2a656f8cd314@gmail.com/
> 
> Signed-off-by: Anirudh Srinivasan <anirudhsriniv at gmail.com>

Thanks for the updated commit message.

Is anybody trying to get the changes in the forked version upstream?
It seems like a reasonable way to solve the problem, at least for new
boards.

Reviewed-by: Andrew Lunn <andrew at lunn.ch>

    Andrew