[PATCH v2 0/4] Revise Meta Santabarbara devicetree

[Andrew Jeffery]

Hi Fred,

On Fri, 2025-08-15 at 16:19 -0500, Rob Herring (Arm) wrote:
> 
> On Thu, 14 Aug 2025 21:16:56 +0800, Fred Chen wrote:
> > Summary:
> > Revise linux device tree entry related to Meta (Facebook) Santabarbara.
> > 
> > Change log
> > v1 -> v2:
> >   - add 'bmc_ready_noled' LED and update commit message
> >   - add sgpio line name for leak detection
> > v1:
> >   - add sensor nodes for extension board
> >   - add mctp node for NIC
> >   - adjust LED configuration
> > 
> > Fred Chen (4):
> >   ARM: dts: aspeed: santabarbara: add sensor support for extension
> >     boards
> >   ARM: dts: aspeed: santabarbara: Enable MCTP for frontend NIC
> >   ARM: dts: aspeed: santabarbara: Adjust LED configuration
> >   ARM: dts: aspeed: santabarbara: add sgpio line name for leak detection
> > 
> >  .../aspeed-bmc-facebook-santabarbara.dts      | 857 +++++++++++++++++-
> >  1 file changed, 853 insertions(+), 4 deletions(-)
> > 
> > --
> > 2.49.0
> > 
> > 
> > 
> 
> 
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
> 
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
> 
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
> 
>   pip3 install dtschema --upgrade
> 
> 
> This patch series was applied (using b4) to base:
>  Base: attempting to guess base-commit...
>  Base: tags/v6.17-rc1-9-g8e4021078863 (exact match)
> 
> If this is not the correct base, please add 'base-commit' tag
> (or use b4 which does this automatically)
> 
> New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250814131706.1567067-1-fredchen.openbmc at gmail.com:
> 
> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dtb: mctp at 10 (mctp-i2c-controller): 'label' does not match any of the regexes: '^pinctrl-[0-9]+$'
>         from schema $id: http://devicetree.org/schemas/net/mctp-i2c-controller.yaml#
> 

Can you please address this warning and send v3? Check that it no-
longer appears after you fix the dts. You can test it with the command
suggested above. More thoughts here:

https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/

Thanks,

Andrew