[PATCH] dt-bindings: hwmon: Convert aspeed,ast2400-pwm-tacho to DT schema

[Rob Herring (Arm)]

On Wed, 29 Oct 2025 13:54:47 -0500, Rob Herring (Arm) wrote:
> Convert the ASpeed fan controller binding to DT schema format.
> 
> The '#cooling-cells' value used is 1 rather than 2. '#size-cells' is 0
> rather 1.
> 
> Some users define more that 8 fan nodes where 2 fans share a PWM. The
> driver seems to let the 2nd fan just overwrite the 1st one. That also
> creates some addressing errors in the DT (duplicate addresses and wrong
> unit-addresses).
> 
> Signed-off-by: Rob Herring (Arm) <robh at kernel.org>
> ---
>  .../hwmon/aspeed,ast2400-pwm-tacho.yaml       | 105 ++++++++++++++++++
>  .../bindings/hwmon/aspeed-pwm-tacho.txt       |  73 ------------
>  2 files changed, 105 insertions(+), 73 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed,ast2400-pwm-tacho.yaml
>  delete mode 100644 Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/aspeed,ast2400-pwm-tacho.example.dtb: fan-controller at 1e786000 (aspeed,ast2500-pwm-tacho): #cooling-cells: 2 was expected
	from schema $id: http://devicetree.org/schemas/thermal/thermal-cooling-devices.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251029185448.2121857-1-robh@kernel.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.