[PATCH v2 2/2] ARM: dts: aspeed: yosemite5: Add Meta Yosemite5 BMC

[Kevin Tung]

On Mon, Sep 29, 2025 at 10:54 AM Andrew Jeffery
<andrew at codeconstruct.com.au> wrote:
>
> Hi Kevin,
>
> On Wed, 2025-09-24 at 20:28 +0800, Kevin Tung wrote:
> > Add device tree for the Meta (Facebook) Yosemite5 compute node,
> > based on the AST2600 BMC.
> >
> > The Yosemite5 platform provides monitoring of voltages, power,
> > temperatures, and other critical parameters across the motherboard,
> > CXL board, E1.S expansion board, and NIC components. The BMC also
> > logs relevant events and performs appropriate system actions in
> > response to abnormal conditions.
> >
> > Signed-off-by: Kevin Tung <kevin.tung.openbmc at gmail.com>
> > ---
> >  .../dts/aspeed/aspeed-bmc-facebook-yosemite5.dts   | 1068 ++++++++++++++++++++
> >  1 file changed, 1068 insertions(+)
>
> This misses adding the devicetree to the dtb target in
> arch/arm/boot/dts/aspeed/Makefile. Consequently I don't expect this was
> tested with `make DTBS_CHECK=y ...`. Fixing the make target and
> checking the DTB yields the following among the usual concerns:
>
> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dtb: ethernet at 1e670000 (aspeed,ast2600-mac): Unevaluated properties are not allowed ('ncsi-package' was unexpected)
>         from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml#
>
> Can you please address that? You may need to update or introduce a
> binding document as part of doing so if it's not a matter of removing
> the property from the devicetree.
>
> Andrew

Thanks for pointing out the mistake.
I have submitted v3 to add the missing devicetree to the DTB target
and to fix the error caused by unevaluated properties that are not
allowed.

Kevin