[PATCH v7 6/7] ARM: dts: aspeed: Add Balcones system

[Andrew Jeffery]

On Mon, 2025-09-29 at 09:52 -0500, Eddie James wrote:
> 
> On 9/25/25 7:03 PM, Andrew Jeffery wrote:
> > On Mon, 2025-09-22 at 12:58 -0500, Eddie James wrote:
> > > The Balcones system is similar to Bonnell but with a POWER11 processor.
> > > Like POWER10, the POWER11 is a dual-chip module, so a dual chip FSI
> > > tree is needed. Therefore, split up the quad chip FSI tree.
> > > 
> > > Signed-off-by: Eddie James <eajames at linux.ibm.com>
> > > ---
> > >   arch/arm/boot/dts/aspeed/Makefile             |   1 +
> > >   .../dts/aspeed/aspeed-bmc-ibm-balcones.dts    | 609 ++++++++++++++
> > Looking at Balcones specifically, there's still an immediate concern:
> > 
> >     /home/andrew/src/kernel.org/linux/origin/build.arm.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: pressure-sensor at 76 (infineon,dps310): '#io-channel-cells' does not match any of the regexes: '^pinctrl-[0-9]+$'
> >             from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> 
> 
> Hmm, patch 3 in the series fixes this.
> 

Indeed.

>  Did you apply that one? 
> 

I hadn't, as I can only take patches 1-2 and 6-7 through the bmc tree.
3 and 4-5 should go through the iio and hwmon trees respectively.

Having tested after integrating the whole series I've applied 1-2 and
6-7 to aspeed/arm/dt.

Thanks,

Andrew