[PATCH 2/3] ARM: dts: aspeed: yosemite5: Update sensor configuration

[Kevin Tung]

Remove sensors 10-0040 and 10-0045 to align with the latest
hardware design changes.

Signed-off-by: Kevin Tung <kevin.tung.openbmc at gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
index 7991e9360847532cff9aad4ad4ed57d4c30668a0..45b8ac2e8c65a4f672e64571631b7f6944f26213 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
@@ -674,20 +674,6 @@ gpio-expander at 22 {
 			"PWRGD_P3V3_AUX","ALERT_TEMP";
 	};
 
-	power-sensor at 40 {
-		compatible = "ti,ina233";
-		reg = <0x40>;
-		shunt-resistor = <2000>;
-		ti,maximum-expected-current-microamp = <32768000>;
-	};
-
-	power-sensor at 45 {
-		compatible = "ti,ina233";
-		reg = <0x45>;
-		shunt-resistor = <2000>;
-		ti,maximum-expected-current-microamp = <32768000>;
-	};
-
 	adc at 48 {
 		compatible = "ti,ads7830";
 		reg = <0x48>;

-- 
2.51.2