[PATCH v2] arm: dts: aspeed: yosemite4: add gpio name for uart mux sel
Delphine CC Chiu
delphine_cc_chiu at wiwynn.com
Mon May 19 12:48:49 AEST 2025
From: Marshall Zhan <marshall.zhan.wiwynn at gmail.com>
Add gpio line name to support multiplexed console
Signed-off-by: Marshall Zhan <marshall.zhan.wiwynn at gmail.com>
Signed-off-by: Delphine CC Chiu <delphine_cc_chiu at wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 40 +++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 29f224bccd63..aae789854c52 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -189,6 +189,11 @@ gpio at 22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT1_UART_SEL0","SLOT1_UART_SEL1",
+ "SLOT1_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio at 23 {
@@ -235,6 +240,11 @@ gpio at 22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT2_UART_SEL0","SLOT2_UART_SEL1",
+ "SLOT2_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio at 23 {
@@ -281,6 +291,11 @@ gpio at 22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT3_UART_SEL0","SLOT3_UART_SEL1",
+ "SLOT3_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio at 23 {
@@ -327,6 +342,11 @@ gpio at 22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT4_UART_SEL0","SLOT4_UART_SEL1",
+ "SLOT4_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio at 23 {
@@ -373,6 +393,11 @@ gpio at 22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT5_UART_SEL0","SLOT5_UART_SEL1",
+ "SLOT5_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio at 23 {
@@ -419,6 +444,11 @@ gpio at 22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT6_UART_SEL0","SLOT6_UART_SEL1",
+ "SLOT6_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio at 23 {
@@ -465,6 +495,11 @@ gpio at 22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT7_UART_SEL0","SLOT7_UART_SEL1",
+ "SLOT7_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio at 23 {
@@ -511,6 +546,11 @@ gpio at 22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT8_UART_SEL0","SLOT8_UART_SEL1",
+ "SLOT8_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio at 23 {
--
2.25.1
WIWYNN PROPRIETARY
This email (and any attachments) contains proprietary or confidential information and is for the sole use of its intended recipient. Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited. If you are not the intended recipient, please notify the sender and delete this email immediately.
More information about the Linux-aspeed
mailing list