[PATCH v1] arm: dts: aspeed: yosemite4: add gpio name for uart mux sel

[Delphine CC Chiu]

From: Marshall Zhan <marshall.zhan.wiwynn at gmail.com>

Add gpio line name to support multiplexed console

Signed-off-by: Marshall Zhan <marshall.zhan.wiwynn at gmail.com>
Signed-off-by: Delphine CC Chiu <delphine_cc_chiu at wiwynn.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 41 +++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 29f224bccd63..ac0678aef7d2 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -189,6 +189,11 @@ gpio at 22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "SLOT1_UART_SEL0","SLOT1_UART_SEL1",
+                                  "SLOT1_UART_SEL2","","","","","",
+                                  "","","","","","","","",
+                                  "","","","","","","","",
+                                  "","","","","","","","";
 	};
 
 	gpio at 23 {
@@ -235,6 +240,11 @@ gpio at 22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "SLOT2_UART_SEL0","SLOT2_UART_SEL1",
+                                  "SLOT2_UART_SEL2","","","","","",
+                                  "","","","","","","","",
+                                  "","","","","","","","",
+                                  "","","","","","","","";
 	};
 
 	gpio at 23 {
@@ -281,6 +291,11 @@ gpio at 22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "SLOT3_UART_SEL0","SLOT3_UART_SEL1",
+                                  "SLOT3_UART_SEL2","","","","","",
+                                  "","","","","","","","",
+                                  "","","","","","","","",
+                                  "","","","","","","","";
 	};
 
 	gpio at 23 {
@@ -327,6 +342,12 @@ gpio at 22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "SLOT4_UART_SEL0","SLOT4_UART_SEL1",
+                                  "SLOT4_UART_SEL2","","","","","",
+                                  "","","","","","","","",
+                                  "","","","","","","","",
+                                  "","","","","","","","";
+
 	};
 
 	gpio at 23 {
@@ -373,6 +394,11 @@ gpio at 22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "SLOT5_UART_SEL0","SLOT5_UART_SEL1",
+				  "SLOT5_UART_SEL2","","","","","",
+				  "","","","","","","","",
+				  "","","","","","","","",
+				  "","","","","","","","";
 	};
 
 	gpio at 23 {
@@ -419,6 +445,11 @@ gpio at 22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "SLOT6_UART_SEL0","SLOT6_UART_SEL1",
+                                  "SLOT6_UART_SEL2","","","","","",
+                                  "","","","","","","","",
+                                  "","","","","","","","",
+                                  "","","","","","","","";
 	};
 
 	gpio at 23 {
@@ -465,6 +496,11 @@ gpio at 22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "SLOT7_UART_SEL0","SLOT7_UART_SEL1",
+                                  "SLOT7_UART_SEL2","","","","","",
+                                  "","","","","","","","",
+                                  "","","","","","","","",
+                                  "","","","","","","","";
 	};
 
 	gpio at 23 {
@@ -511,6 +547,11 @@ gpio at 22 {
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "SLOT8_UART_SEL0","SLOT8_UART_SEL1",
+                                  "SLOT8_UART_SEL2","","","","","",
+                                  "","","","","","","","",
+                                  "","","","","","","","",
+                                  "","","","","","","","";
 	};
 
 	gpio at 23 {
-- 
2.25.1